• Genomics & Informatics
• /
• 제4권1호
• /
• pp.23-32
• /
• 2006

In order to investigate the molecular basis of the aging process in brain, we have employed high-density oligonucleotide microarrays providing data on 10,108 gene clusters to define transcriptional patterns in three brain regions, cerebral cortex, cerebellum, and hippocampus. Comparison of the expression patterns between young (6-week-old) and aged (17-month-old) C57BL/6 male micerevealed that about ten percent (1098) of the genes showed a significant change in the expression level in at least one of the three tissues. Among them, 23 genes were upregulated and 62 genes were downregulated in all three tissues of the old mice. The number of genes upregulated exclusively in hippocampus (337) was much larger compared to other tissues. Gene ontology-based analysis showed the genes related with signal transduction or molecular transports are more likely to be upregulated than downregulated in the aging process of hippocampus. These data may provide some useful means for elucidating the molecular aspect of aging in hippocampus and other regions in brain.

• 한방안이비인후피부과학회지
• /
• 제27권1호
• /
• pp.45-57
• /
• 2014

Objective : The purpose of this study is to understand aging and skin aging with both western and Korean medicine. Methods : We investigated the comprehension of general aging and skin aging in both western and Korean medicine through literature review. Result : The results are as follows. 1. Aging in western is a complex process influenced by telomere shortening and damage to cellular DNA. In Korean medicine, it is supposed that decline of interaction between yin(陰) and yang(陽) makes aging. 2. Skin aging in western medicine consists of intrinsic aging and extrinsic aging. In Korean medicine, skin aging goes with the aging of whole body and distinctive features of geroderma notice the unbalance of the whole body function. 3. Generally geroderma has decreased development of cells and low immunity, which is the function of kidney(腎) in Korean medicine. Conclusion : Further studies are needed to apply comprehension of skin aging in Korean medicine to clinical stage.

• Steel and Composite Structures
• /
• 제21권6호
• /
• pp.1183-1210
• /
• 2016

Viscoelastic sandwich structures (VSSs) are widely used in mechanical equipment, but in the service process, they always suffer from aging which affect the whole performance of equipment. Therefore, aging state recognition of VSSs is significant to monitor structural state and ensure the reliability of equipment. However, non-stationary vibration response signals and weak state change characteristics make this task challenging. This paper proposes a novel method for this task based on adaptive second generation wavelet packet transform (ASGWPT) and multiwavelet support vector machine (MWSVM). For obtaining sensitive feature parameters to different structural aging states, the ASGWPT, its wavelet function can adaptively match the frequency spectrum characteristics of inspected vibration response signal, is developed to process the vibration response signals for energy feature extraction. With the aim to improve the classification performance of SVM, based on the kernel method of SVM and multiwavelet theory, multiwavelet kernel functions are constructed, and then MWSVM is developed to classify the different aging states. In order to demonstrate the effectiveness of the proposed method, different aging states of a VSS are created through the hot oxygen accelerated aging of viscoelastic material. The application results show that the proposed method can accurately and automatically recognize the different structural aging states and act as a promising approach to aging state recognition of VSSs. Furthermore, the capability of ASGWPT in processing the vibration response signals for feature extraction is validated by the comparisons with conventional second generation wavelet packet transform, and the performance of MWSVM in classifying the structural aging states is validated by the comparisons with traditional wavelet support vector machine.

• 한국식품과학회지
• /
• 제49권6호
• /
• pp.714-716
• /
• 2017

장미꽃을 $30^{\circ}C$, 상대습도 60%의 조건에서 24시간 동안 숙성하여 총페놀화합물 함량, 산화방지 활성, 카테킨 함량을 최대로 증가시키는 조건을 수립하였다. 장미꽃을 차로 이용하기 전에 숙성공정을 통하여 생리활성 물질인 카테킨을 비롯한 페놀화합물의 추출 효율을 증가시킬 수 있고 이에 따라 장미꽃 차의 산화방지효과를 증대 시킬 수 있다.

• 대한약침학회지
• /
• 제20권1호
• /
• pp.29-35
• /
• 2017

Objectives: Aging is an unconscious and gradual process that can lead to changes in biological systems. Induction of oxidative stress and apoptosis, hepatotoxicity and neurotoxicity are involved in the aging process. Regarding the antioxidant property of black seed oil, the aim of this study was to evaluate the anti-aging effect of Nigella sativa (N. sativa) oil on d-galactose-induced aging in mice. Methods: For induction of aging, D-galactose (500 mg/kg, subcoutaneously SC) was administrated to male mice for 42 days. Animals were treated with D-galactose alone or with b lack seed oil (0.1, 0.2, 0.5 mL/kg, intraperitoneally (ip)). Additionally, vitamin E (200 mg/kg) was used as a positive control. At the end of treatment, the malondialdehyde (MDA) and the glutathione (GSH) contents in brain and liver tissues were measured. Also, enzymes in serum, including aspartate aminotransferase (AST) and alanine amino transferase (ALT), were determined. The levels of the proteins Bax, Bcl2, caspase-3 (pro and cleaved) in brain and liver tissues were evaluated. Results: Administration of D-galactose (500 mg/kg, SC) for 42 days increased serum levels of ALT and AST, as well as the MDA content, in brain and liver tissues, but decreased the GSH content. Additionally, the levels of apoptotic proteins, including Bax, procaspase-3 and caspase-3 cleaved, were markedly increased. N. sativa oil (0.1 and 0.2 mL/kg) diminished the levels of the biochemical markers ALT and AST. Administration of black seed oil (0.1, 0.2 and 0.5 mL/kg) reduced lipid peroxidation and at doses 0.1 and 0.2 mL/kg significantly recovered the GSH content. The oil decreased Bax/Bcl2 levels and at 0.1 mL/kg down-regulated the expressions of caspase-3 (pro and cleaved) proteins in brain and liver tissues. Conclusion: Through its antioxidant and anti-apoptosis properties, black seed oil exhibited an anti-aging effect in a model of aging induced with D-galactose.

• 열처리공학회지
• /
• 제32권6호
• /
• pp.249-255
• /
• 2019

This study is intended to clarify the main microstructural factors that contribute to an increase of hardness during isothermal aging in Mg-Al alloy. For this work, Mg-9.3%Al alloy specimens were solution-treated at 688 K for 24 h followed by water quenching, and then aged at 473 K for up to 24 h. The aging at 473 K yielded nodular discontinuous precipitates (DPs) with (${\alpha}+{\beta}$) lamellar morphology at the grain boundaries, and the volume fraction of DPs increased from 0% to ~30% with increasing aging time up to 12 h. For the aging times longer than 12 h, further formation of DPs was substantially inhibited owing to the occurrence of significant continuous precipitation within the ${\alpha}-(Mg)$ matrix, and the density of continuous precipitates (CPs) becomes greater with increasing aging time. Hardness of the specimen was steadily increased with aging time up to 24 h. Microstructural examination on the aged specimens revealed that the increased overall hardness at the early stage of aging is associated with the increased volume fraction of DPs, but at the later stage of aging, where the amount of DPs was hardly changed, the increased hardness of the ${\alpha}-(Mg)$ matrix in response to the higher density of CPs within the matrix, plays a key role in increasing the overall hardness value.

• 대한치과기공학회지
• /
• 제34권4호
• /
• pp.345-352
• /
• 2012

Purpose: The age-hardening mechanism of an Au-Ag-Cu-Pt-Zn alloy for crown and bridge fabrication was investigated by means of hardness test, X-ray diffraction study and field emission scanning electron microscopic observation. Methods: Before hardness testing, the specimens were solution treated and then were rapidly quenched into ice brine, and were subsequently aged isothermally at $400-450^{\circ}C$ for various periods of time in a molten salt bath and then quenched into ice brain. Hardness measurements were made using a Vickers microhardness tester. The specimens were examined at 15 kV using a field emission scanning electron microscope. Results: By the isothermal aging of the solution-treated specimen at $450^{\circ}C$, the hardness increased rapidly in the early stage of aging process and reached a maximum hardness value. After that, the hardness decreased slowly with prolonged aging. However, the relatively high hardness value was obtained even with 20,000 min aging. By aging the solution-treated specimen, the f.c.c. Au-Ag-rich ${\alpha}_0$ phase was transformed into the Au-Ag-rich ${\alpha}_1$ phase and the AuCu I ordered phase. Conclusion: The hardness increase in the early stage of aging process was attributed to the formation of lattice strains by the precipitation of the Cu-rich phase and then subsequent ordering into the AuCu I-type phase. The decrease in hardness in the later stage of aging process was due to the release of coherency strains by the coarsening of tweed structure in the grain interior and by the growth and coarsening of the lamellar structure in the grain boundary. The increase of inter-lamellar space contributed slightly to the softening compared to the growth of lamellar structure toward the grain interior.

• 센서학회지
• /
• 제26권4호
• /
• pp.292-296
• /
• 2017

It has become ever harder to design reliable circuits with each nanometer technology node under normal operation conditions, a transistor device can be affected by various aging effects resulting in performance degradation and eventually design failure. The reliability (aging) effect has traditionally been the area of process engineers. However, in the future, even the smallest of variations can slow down a transistor's switching speed, and an aging device may not perform adequately at a very low voltage. Because of such dilemmas, the transistor aging is emerging as a circuit designer's problem. Therefore, in this paper, the impact of aging effects on the delay and power dissipation of digital circuits by using nanomneter MOSFET power gating structure has been analyzed.. Based on this analyzed aging models, a reliable digital circuits can be designed.

• BMB Reports
• /
• 제54권5호
• /
• pp.253-259
• /
• 2021

Aging is characterized by a functional decline in most physiological processes, including alterations in cellular metabolism and defense mechanisms. Increasing evidence suggests that caloric restriction extends longevity and retards age-related diseases at least in part by reducing metabolic rate and oxidative stress in a variety of species, including yeast, worms, flies, and mice. Moreover, recent studies in invertebrates - worms and flies, highlight the intricate interrelation between reproductive longevity and somatic aging (known as disposable soma theory of aging), which appears to be conserved in vertebrates. This review is specifically focused on how the reproductive system modulates somatic aging and vice versa in genetic model systems. Since many signaling pathways governing the aging process are evolutionarily conserved, similar mechanisms may be involved in controlling soma and reproductive aging in vertebrates.

• 한국압력기기공학회 논문집
• /
• 제12권1호
• /
• pp.41-48
• /
• 2016

To investigate the effect of long-term thermal aging on the microstructural and mechanical characteristics of weldment made of nickel base alloy and its weld metal, an accelerated heat treatment was applied to simulate the process of long-term thermal aging in the operating condition of nuclear power plant. A representative nickel-based weldment with Alloy 600 and Alloy 182 was fabricated and heat-treated at $400^{\circ}C$ for 1,713 h and 3,427 h to simulate the thermal aging for the period equivalent to 15 and 30 years in operating pressurized water reactors, respectively. The microstructural and mechanical characteristics were analyzed by using optical microscopy, scanning electron microscopy and Vickers microhardness measurement. Changes were observed in precipitation behavior and microhardness of each specimen, and these changes were mainly attributed to the change in precipitated morphology and residual stress across the weld during the thermal aging process.