• 한국건설순환자원학회논문집
• /
• 제7권4호
• /
• pp.71-78
• /
• 2012

순환골재는 건설폐기물을 재활용함으로써 자원절약 및 대체자원의 개발과 환경보호의 측면에서 국가 사회적으로 많은 이점을 가지고 있다. 하지만 낮은 밀도와 높은 흡수율을 가지는 저품질 순환골재는 구조용 콘크리트 골재로 사용되지 못하고 주로 저부가가치로 사용되고 있다. 따라서, 이를 위하여 폐콘크리트 파 분쇄 후 발생되는 순환골재의 재료적 특성을 규명하기 위하여 물리적인 주요성질인 시멘트함유량, 절대건조밀도, 흡수율, 등을 검토하고, 2차 제품 생산을 위한 배합설계(안)을 도출하여 이를 적용한 배합으로 생산된 시제품의 휨 강도, 흡수율, 동결 융해 후 휨 강도, 압축강도, 기건비중 등에 대한 성능평가를 실시하여 품질기준 GR규격과 비교 검토 하였다. 실헌결과 순환골재 대체율 50~90%로 증가함에 따라 GR F 4007의 성능기준 보다 우수한 품질로 나타났으며, 순환골재를 사용한 콘크리트 2차 제품의 제조 및 활용할 수 있는 소정의 물리적 특성을 확보함에 따라 각종 건설공사에서 다양하게 사용이 가능 할 것으로 판단된다.

• KIEAE Journal
• /
• 제8권5호
• /
• pp.61-68
• /
• 2008

For the recycling of the resources and the preservation of the environment, this study's purpose is to measure flexural behavior of the reinforced concrete beams with the major variables like concrete strength, replacement ratio of the recycled aggregate and the waste foundry sand and the tension reinforcement ratio and to present the data of the recycled aggregate used for the structure design. The experiment on the flexural behavior resulted in the followings. The ultimate strength of recycled R/C beam was manipulated proportionate to the tension reinforcement ratio, however the strength instantly decreased after passing the ultimate load due to the destroyed concrete of the compression side. The deflection at the maximum load varied from the tension reinforcement ratio by 5.5 times. The test specimen with the tension reinforcement ratio less than $0.5{\rho}b$ showed constant curve without change in the load from the yield to the ultimate load in contrast to the distinctive plastic region where the displacement was rising. Although the strain of main tension steel with the reinforcement ratio indicate different, the design of recycled concrete member can be applied for current design code for reinforced concrete structure as the ratio of tension reinforcement district the under the reinforcement ration in a balanced strain condition.

• 한국안전학회지
• /
• 제17권1호
• /
• pp.72-78
• /
• 2002

Among the disposal techniques of inorganic wastewater sludges from industries most of sludges were dealed with buring underground inefficiently. But we have tried to recycle the resources that exhausted inorganic sludges were properly blended to certain ratioes to make lightweight aggregate, that means manufacturing of it can be possible through blending of various components, drying, sintering, cooling and crushing to certain sizes that are needed by consumers. As disposal method of inorganic wastewater sludge is changed to environmentally fraternative method, this method could be very useful to make lightweight aggregates for decoration of building and the other so many purposes of those usages. That could be economically useful due to expected income for buring costs of ordinary disposal method form industries and sales income after manufacturing it. The second important profit is saving foreign currency from purchasing self-developed lightweight aggregate insteas of importing expensive foreign product. This product will be also very impressive to user because of the fraternative lightweight to be composed of apatite structure that is important part of human body.

• Computers and Concrete
• /
• 제13권3호
• /
• pp.325-342
• /
• 2014

The use of lightweight aggregate (LWA) instead of ordinary aggregate may make lightweight aggregate concrete, which possesses many advantages such as lightweight, lower thermal conductivity, and better fire and seismic resistance. Recently the developments of LWA have been focused on using industrial wastes as raw materials to reduce the use of limited natural resources. In view of this, the intent of this study was to apply Taguchi optimization technique in determining process condition for producing synthetic LWA by incorporating waste thin film transition liquid crystal displays (TFT-LCD) glass powder with reservoir sediments. In the study the waste TFT-LCD glass cullet was used as an additive. It was incorporated with reservoir sediments to produce LWA. Taguchi method with an orthogonal array L16(45) and five controllable 4-level factors (i.e., cullet content, preheat temperature, preheat time, sintering temperature, and sintering time) was adopted. Then, in order to optimize the selected parameters, the analysis of variance method was used to explore the effects of the experimental factors on the performances (particle density, water absorption, bloating ratio, and loss of ignition) of the produced LWA. The results showed that it is possible to produce high performance LWA by incorporating waste TFT-LCD glass cullet with reservoir sediments. Moreover, Taguchi method is a promising approach for optimizing process condition of synthetic LWA using recycled glass cullet and reservoir sediments and it significantly reduces the number of tests.

• Smart Structures and Systems
• /
• 제23권2호
• /
• pp.207-214
• /
• 2019

Achieving a pervious concrete (PC) with appropriate physical and mechanical properties used in pavement have been strongly investigated through the use of different materials specifically from the global waste materials of the populated areas. Discarded tires and the rubber tire particles have been currently manufactured as the recycled waste materials. In the current study, the combination of polymer, silica fume and rubber aggregates from rubber tire particles have been used to obtain an optimized PC resulting that the PC with silica fume, polymer and rubber aggregate replacement to mineral aggregate has greater compressive and flexural strength. The related flexural and compressive strength of the produced PC has been increased 31% and 18% compared to the mineral PC concrete, also, the impact resistance has been progressed 8% compared to the mineral aggregate PC and the permeability with Open Graded Fraction Course standard (OGFC). While the manufactured PC has significantly reduced the elasticity modulus of usual pervious concrete, the impact resistance has been remarkably improved.

• 한국건설순환자원학회논문집
• /
• 제2권2호
• /
• pp.83-92
• /
• 2006

Recently, interest grew recently on the quality of aggregates following the diminution of primary resources from river and the growing construction demand which exhausted high-quality sand sources around large cities and incited the use of low grade aggregates like shore sand and sea sand that can be supplied in natural state. Especially, the environmental preservation concern and the augmentation of public grievance about the exploitation of sea sand as substitute to river sand are gradually impeding the supply. This situation aggravated by the recent interdiction to extract sea sand which resulted in sand crisis that even led once to the suspension of construction works. The lack of sea sand and river sand increased the exploitation of crushed sand which occupies now nearly 20% of the whole quantity of fine aggregates. And, the use of crushed sand may be expected to grow continuously in the future. This paper described that the properties of crushed sand and the concrete using the crushed sand, the technologies to improve quality of crushed sand and the concrete in order to provide information for the production of high-quality concrete using crushed sand.

• 한국건설순환자원학회논문집
• /
• 제1권2호
• /
• pp.107-113
• /
• 2013

연구에서는 문제시 되는 순환자원의 종류를 상호 보완적으로 활용하여 문제를 해결하고자하는 연구이다. 즉, 고로슬래그 미분말(BS)의 잠재 수경성반응을 순환 잔 굵은 골재의 알칼리로 반응시키고, 부족분의 알칼리를 보통포틀랜드 시멘트(OPC)로 해결하면서 소석회 처리된 소각장애시(WA)의 치환율을 실험변수로하여 최적치를 구하고자 실험하였다. 실험결과 WA 치환율이 증가할수록 유동성과 공기량은 약간 저하하고, 염화물량은 증가하여 불리하였지만 압축 및 인장강도가 1% 에서 최대 값을 나타내어 폐기물 유효처리 관점까지도 고려하면 WA 1% 혼합이 최적인 것으로 분석되었다.

• 한국자원리싸이클링학회:학술대회논문집
• /
• 한국자원리싸이클링학회 2006년도 춘계임시총회 및 제27회 학술발표대회
• /
• pp.135-139
• /
• 2006

• KIEAE Journal
• /
• 제14권1호
• /
• pp.131-138
• /
• 2014

The recent interests in securing alternative resource have increased due to environmental issues and exhaustion of natural resources. The government notices production of recycled aggregate using waste concrete as the substitute of the natural aggregate. However, It's important to reduce environmental burden being inevitably made in the process producing recycled aggregate. In this study, the scenarios of transportation distance were set in the transportation phase of production of recycled aggregate. In addition, The possibility of emissions and reduction of carbon dioxide were studied depending on the scenarios. For this study, data about a amount of waste concrete, transportation distance, kind of vehicle, the number of required vehicle, fuel efficiency of vehicle and etc were gathered from 15 companies of intermediate treatment and 60 constructions sites located in Daegu city and Kyungpook area. Based on those data, fuel consumptions and $CO_2$ emissions according to the transportation scheme of waste concrete were calculated. As a result of the study, the emission of carbon dioxide was possible to be reduced by 27.8~75.4% depending on the scenarios of transportation distance.

• 한국구조물진단유지관리공학회 논문집
• /
• 제15권3호
• /
• pp.178-185
• /
• 2011

본 연구는 강모래와 부순 모래를 일반적인 혼합방법과 아스팔트 골재 혼합에 사용되는 Driscoll 방법으로 각각 혼합하여 그 특성을 알아보고, Driscoll 방법의 콘크리트용 골재에 대한 적용성을 판단하고자 하였다. 이에 따라 일반혼합과 Driscoll 방법으로 혼합한 골재의 조립율 및 입도곡선, 굳지 않은 콘크리트의 특성 중 슬럼프와 공기량 및 굳은 콘크리트의 특성 중 28일 압축강도 시험을 통해 혼합방법의 따른 특성을 알아보고자 하였다. 아스팔트 골재의 혼합에 사용되는 Driscoll 방법을 사용하여 콘크리트 골재를 혼합하였을 때 일반적인 혼합방법과 비교하여 슬럼프, 공기량, 28일 압축강도가 오차수준 정도의 미미한의 차이를 나타내었다. 따라서 아스팔트 골재 혼합에 사용되는 Driscoll 방법은 콘크리트용 잔골재의 혼합에도 적용 가능할 것으로 판단된다.