• Journal of the korean academy of Pediatric Dentistry
• /
• v.44 no.1
• /
• pp.20-27
• /
• 2017

This study aimed to assess microleakage of Endoseal MTA when it is used as a root canal sealer and a root canal filling material compared with conventional endodontic treatment materials Forty-two mature human permanent teeth with a single root canal were divided randomly into three experimental groups (n = 10) and two control groups (n = 6). Group A was obturated with AH $plus^{(R)}$ and gutta-percha (GP). Group E1 was obturated with Endoseal MTA and GP. Group E2 was obturated with Endoseal MTA only. The positive control group was obturated with GP only and the negative control group was obturated in the same way as the experimental groups. The samples were kept in saline solution for 24 hours and were immersed in 0.2% rhodamine B dye solution for 24 hours. Then the samples were split longitudinally and the micoleakage was assessed under a stereomicroscope. Complete microleakage was detected in all positive control group samples, whereas no microleakage was detected in the negative control group. There was no statistically significant difference between the experimental groups in the Kruskal-Wallis test. These results suggest that Endoseal MTA has potential use as a root canal sealer and a root canal filling material.

• Korean Journal of Soil Science and Fertilizer
• /
• v.33 no.2
• /
• pp.61-70
• /
• 2000

Soil erosion in the hilly and mountainous uplands in the Daekwanryong area, Kangwon-Do, were investigated through a field plot experiment. The plot size was 15m long and 2.5m wide with the average slope of 12.5 percents. Soil erodibility factor (K), surface coverage (SC), soil aggregate percentage and wind erodibility (I) were evaluated in the mountainous soils under different management practices for corn and potato cultivations. Soil erodibility factor (K) was greater in upper part than in lower part of the plots. Surface coverage (SC) values ranged from 0.01 to 0.84 depending on the amounts of crop residues. Soils having a greater crop residue in surface were less subjected to soil erosion. SC values after corn harvest were 0.4 to 0.8, while those after potato harvest were 0.4 to 0.5, indicating potato might be better than corn for erosion control. Soil aggregate percentages of the experimental plots ranged from 49.7 to 79.8%. Those were higher in potato-cultivated plots with higher surface coverage, organic fertilizer treatment and contour tillage. Soil aggregate percentage of potato-cultivated plots was significantly correlated to crop residue coverage after harvest. The dried soil aggregate percentage, showing the ranges of 26.4 to 56.4%, were higher in the plots with the increased crop residue incorporation. Wind erodibility (I) of the soil was decreased with increasing surface coverage. When soil had 26.4% of the dried aggregate percentage, wind erodibility was estimated to be $183Mgha^{-1}$ which was equivalent to soil loss of $0.5Mg\ha^{-1}day^{-1}$.

• Restorative Dentistry and Endodontics
• /
• v.34 no.4
• /
• pp.371-376
• /
• 2009

We evaluated in vitro microleakage of Mineral Trioxide Aggregate (MTA) powder with 4-methacryloxyethyl trimellitate anhydride (4-META) / methyl methacrylate (MMA) & tri-n-butylborane (TBB) resin as a retrograde filling material by using methylene blue dye method. Fifty-two single rooted, extracted teeth were instrumented and obturated with gutta percha and AH plus sealer. The apical 3mm of each root was resected and 3mm deep ultrasonic root end preparation was done. External surface of roots was coated with nail varnish. Prepared teeth were randomly divided into five groups; Negative control: completely covered with nail varnish; Positive control: coated with nail varnish except for apical foramen; Group 1 (retrofilled with Portland cement); Group 2 (retrofilled with MTA); Group 3 (retrofilled with MTA powder mixed with 4-META/MMA & TBB resin). Immediately after completion of root-end filling, all specimens were submerged in methylene blue dye for 72 hours in $37^{\circ}C$incubator. The roots were longitudinally sectioned and measured for extent of dye penetration by three different examiners under microscope (${\times}$10). The results were statistically analyzed using one way ANOVA and Turkey's HSD test. No leakage was evident in negative control and complete leakage in positive control group. Group 3 showed significantly less leakage than group 1 and 2 (p < 0.01). There was no significant difference between group 1 and 2 (p > 0.01). It was concluded that MTA powder with 4-META/MMA & TBB resin was excellent in reducing initial apical microleakage.

• International Journal of Control, Automation, and Systems
• /
• v.1 no.1
• /
• pp.101-110
• /
• 2003

This paper introduces an identification method for nonlinear models in the form of rule-based Fuzzy-Neural Networks (FNN). In this study, the development of the rule-based fuzzy neural networks focuses on the technologies of Computational Intelligence (CI), namely fuzzy sets, neural networks, and genetic algorithms. The FNN modeling and identification environment realizes parameter identification through synergistic usage of clustering techniques, genetic optimization and a complex search method. We use a HCM (Hard C-Means) clustering algorithm to determine initial apexes of the membership functions of the information granules used in this fuzzy model. The parameters such as apexes of membership functions, learning rates, and momentum coefficients are then adjusted using the identification algorithm of a GA hybrid scheme. The proposed GA hybrid scheme effectively combines the GA with the improved com-plex method to guarantee both global optimization and local convergence. An aggregate objective function (performance index) with a weighting factor is introduced to achieve a sound balance between approximation and generalization of the model. According to the selection and adjustment of the weighting factor of this objective function, we reveal how to design a model having sound approximation and generalization abilities. The proposed model is experimented with using several time series data (gas furnace, sewage treatment process, and NOx emission process data from gas turbine power plants).

• Computers and Concrete
• /
• v.21 no.3
• /
• pp.311-319
• /
• 2018

This study used a volumetric method for design. The control group used waste Liquid Crystal Displayplay (LCD) glass powder to replace cement (0%, 10%, 20%, 30%), and the PZT group used Pd-Zr-Ti piezoelectric (PZT) powder to replace 5% of the fine aggregate to make cement mortar. The engineering and the mechanical and electricity properties were tested; flow, compressive strength, ultrasonic pulse velocity (UPV), water absorption and resistivity (SSD and OD electricity at 50 V and 100 V) were determined; and the correlations were determined by linear regression. The compressive strength of the control group (29.5-31.8 MPa) was higher than that of the PZT group (25.1-29 MPa) by 2.8-4.4 MPa at the curing age of 28 days. A 20% waste LCD glass powder replacement (31.8 MPa) can fill up finer pores and accelerate hydration. The control group had a higher 50 V-SSD resistivity ($1870-3244{\Omega}.cm$), and the PZT group had a lower resistivity ($1419-3013{\Omega}.cm$), meaning that the resistivity increases with the replacement of waste LCD glass powder. This is because the waste LCD glass powder contains 62% $SiO_2$, which is a low dielectric material that is an insulator. Therefore, the resistivity increases with the $SiO_2$ content.

• Journal of Energy Engineering
• /
• v.20 no.3
• /
• pp.216-223
• /
• 2011

This paper presents an effective energy saving algorithm for lighting control systems using M&V method in various buildings and factories. It is important to aggregate a various demand side resource which is controllable at the peak power time to reduce the energy cost. Previous demand side algorithm appropriate for building is based on peak power. In this paper, we develop the new energy saving algorithm using M&V method to reduce the quantity of power consumption. The simulation results show that the proposed method is very effective.

• Journal of the Korean Institute of Intelligent Systems
• /
• v.8 no.2
• /
• pp.134-141
• /
• 1998

Sometimes we need to acquire symbolic quantity of information instead of physical quantity for the output of any system. For instance we can not control traffic signal accurately through only the number of vehicles. At that case we can produce better output using symbolic quantity of road length and width and vehicle type. But it is very difficult to aggregate symbolic information from the unrelated and mutually conflicted input after calculating linear and related expression. Moreover that will take much time to produce symbolic output by the physical quantity only. In this paper we implemented the ultimate traffic control information by using fuzzy sensor algorithm and compared our results with the conventional traffic controller after studying the necessity of symbolic information in the traffic control.

• BMB Reports
• /
• v.34 no.4
• /
• pp.329-333
• /
• 2001

Active lipoprotein lipase (LPL) is known as a noncovalent homodimer of identical subunits, and dissociation of the dimer to a monomeric form renders the lipase inactive. In this study, the oligomerization status of LPL in human and rat plasma was investigated. The LPL activity was barely detectable in the control rat and human plasma. After the injection of heparin, the total lipolytic activity of plasma was rapidly increased, and reached its maximum in 30 min. Changes of the LPL protein correlated well with those of lipolytic activity. The LPL protein that is released by heparin into both human and rat plasma was active and dimeric in the sucrose density gradient ultracentrifugation. In control rat plasma, LPL was inactive, and a great fraction was present as an aggregate. However, the inactive LPL protein in the control human plasma retained the dimeric state, indicating that dimerization can be an entity independent of the catalytic activity of LPL. The released LPL is transported as a complex with lipoproteins in plasma. Lipoprotein profiles, determined by NaBr ultracentrifugation, exhibited typical LDL- and HDL-mammal patterns in humans and rats, respectively, with a smaller amount of the LDL fraction observed in rats. The difference in the lipoprotein profiles might influence the fate of the released LPL in plasma.

• KOREAN JOURNAL OF CROP SCIENCE
• /
• v.41 no.6
• /
• pp.685-691
• /
• 1996

This experiment was conducted to investigate the effect of some soil conditioners, such as polyvinylalcohol(PVA), zeolite and perlite, on the changes of soil physical properties and on tobacco growth in paddy-upland rotated field. Soil conditioners were treated at the rates of 120kg in PVA, 500kg in zeolite and perlite per l0a, respectively. Ratio of soil aggregates formed from the treated plots tended to. be higher than those from the control in the order of PVA > perlite > zeolite. The wet aggregate stability, mean weight diameter, moisture retention and air permeability from the treated plots tended to be higher than those from the control. Amounts of water-stable aggregates of PV A-treated soil increased with higher soil moisture showing a peak at 50% of moisture content. But with respect to particle of size aggregate formed for crop growth and workability in field, it was presumed that 40% of soil moisture content would be most desirable. Visual characters of soil surface throughout the experiment clearly showed that treated soils were maintaining better surface roughness and porosity than control, but difference in water stable aggregates among treated plots tended to be narrowed. The growths of tobacco, espacially its root zone were better in conditioner treated plots than in non-treated plot showing best in PVA-treated soil.

• International Journal of Highway Engineering
• /
• v.6 no.4 s.22
• /
• pp.35-43
• /
• 2004

Skid resistance is an important factor that control braking distance and secure safety by preventing slipperiness between tire and pavement surface. Decrease of skid resistance at wet condition may cause fatal traffic accidents. Dirt materials such as sand and do-icings on the road surface also can be a factor for decrease skid resistance. This study makes an investigation into influence of skid resistance between varied cement concrete pavements about surface texturing method(transverse tining, longitudinal tining, exposed aggregate surface texturing method) and wearing condition of pavement surface texture(new constructed pavement's surface, wore pavement's surface) using accelerate concrete pavement wearing tester when remains of dirt material are obtained between tire and road surface on PCC pavement. As dirt material on road surface of concrete pavement, sand, calcium chloride and old oil were used with different amount of each cases.