• Steel and Composite Structures
• /
• v.35 no.1
• /
• pp.1-12
• /
• 2020

This article deals with the buckling analysis in the plates containing carbon nanotubes (CNTs) subject to axial load. In order to control the plate smartly, a piezoelectric layer covered the plate. The plate is located in elastic medium which is modeled by spring elements. The Mori-Tanaka low is utilized for calculating the equivalent mechanical characteristics of the plate. The structure is modeled by a thick plate and the governing equations are deduced using Hamilton's principle under the assumption of higher-order shear deformation theory (HSDT). The Navier method is applied to obtain the bulking load. The effects of the applied voltage to the smart layer, agglomeration and volume percent of CNT nanoparticles, geometrical parameters and elastic medium of the structure are assessed on the buckling response. It has been demonstrated that by applying a negative voltage, the buckling load is increased significantly.

• Structural Engineering and Mechanics
• /
• v.67 no.3
• /
• pp.311-316
• /
• 2018

Vibration of concrete beams reinforced by agglomerated silicon dioxide ($SiO_2$) nanoparticles is studied based on numerical methods. The structure is simulated by Euler-Bernoulli beam model and the Mori-Tanaka model is used for obtaining the effective material properties of the structure. The concrete beam is located in soil medium which is modeled by spring elements. The motion equations are derived based on energy method and Hamilton's principle. Based on exact solution, the frequency of the structure is calculated. The effects of different parameters such as volume percent of $SiO_2$ nanoparticles and agglomeration, soil medium and geometrical parameters of beam are shown on the frequency of system. The results show that with increasing the volume percent of $SiO_2$ nanoparticles, the frequency increases.

• Journal of Distribution Science
• /
• v.13 no.4
• /
• pp.29-33
• /
• 2015

Purpose - This paper aims to explain the interactive relationship between small and medium-sized enterprises' clusters and regional economic growth, with Jiangsu Province as an illustrative example. It focuses on studying the promotional effects, if any, of small and medium-sized enterprises' cluster-development on regional economic growth, and vice-versa. Research design, data, and methodology - Data were collected from the Jiangsu Statistical Yearbook and the China Industrial Economic Statistical Yearbook, by selecting 26 industries as the research subjects. The sample interval selection is 1981-2012. The data were analyzed with the dynamic panel system using stata 12.0. Results - 1) The small and medium-sized enterprises' cluster degree and Jiangsu's economic growth have a long-term stable equilibrium relationship. 2) In the short term, they have a dynamic adjustment 3) The enterprises' cluster degree leads to regional economic growth in Jiangsu, but not vice-versa. Conclusions - Small and medium-sized enterprises' clusters have an important promotional effect on Jiangsu's economic growth, especially industries with high degree of agglomeration. Therefore, the formation of these clusters can significantly improve economic growth.

• Journal of the Korean Society for Precision Engineering
• /
• v.27 no.7
• /
• pp.49-54
• /
• 2010

The cryogenic ball milling was performed on carbon nanotubes (CNTs) at an extremely low temperature to increase the dispersion of CNTs. The effects of milling speed and time on the deagglomeration and structural changes of CNTs were studied. FESEM was used to analyze the dispersion and the change of particle size before and after milling process. Transmission electron microscopic (TEM) analysis was also investigated the effect of cryogenic ball milling on the morphological characteristics of CNTs. The structural changes by the cryogenic ball milling process were further confirmed by x-ray diffraction (XRD) and Raman spectroscopic analysis. The results showed that the agglomeration of CNTs was significantly reduced and amorphous structure was observed at high milling speed. However, the milling time has no great effect on the dispersion property and structural change of CNTs compared with milling speed.

• Journal of the Korean Regional Science Association
• /
• v.15 no.1
• /
• pp.93-116
• /
• 1999

Recently the concept of learning has become very fashionable among academics from different economic disciplines. Economic geographers and spatial planners joined this fashion by increasingly speaking about the 'learning region'. This paper makes clear that this learning region'. This paper makes clear that this learning region concept has been launched from three angles; as spatial outcome of grand societal changes, as spatial concentration of entrepreneurial learning for innovation and as regional development concept. Despite the deficits and flaws such a young concept is faced with, such as vague definitions, the lack of empirical research and an insufficiently clear separation from existing concepts, the learning region concept might provide economic geography with more insight in agglomeration effects, stronger links with policy-making and more knowledge on path dependency and thus on unravelling the distinction between 'good' and 'bad' industrial agglomerations.

• Proceedings of the Korean Institute of Industrial Safety Conference
• /
• 1999.06a
• /
• pp.229-233
• /
• 1999

일반적으로 가연성 분진의 최소착화에너지(Minimum Ignition Energy; MIE)를 측정하는 방법에는 Hartmann식(이하 재래식이라 칭한다)이 주로 이용되고 있다. 그러나, 재래식은 상당히 정확하게 측정할 수 있으나 착화 후 용기류의 청소, 실험장치의 조작성 등 실험에 어려움이 있으며, 또한, 압축공기계통의 필요 등으로 제조 가격이 상당히 고가이다. 따라서, 일본에서는 이러한 재래식의 단점을 보완하면서도 기존의 재래식보다 신뢰성이 크게 뒤떨어지지 않은 장치를 개발하고자, 신 개념의 진동형 분진 최소 착화 에너지 측정장치를 개발중에 있다. (중략)

• Journal of Environmental Health Sciences
• /
• v.22 no.4
• /
• pp.1-9
• /
• 1996

Experiments have been made to test the practical feasibility of using calcined manganese ore to desulfurize hot reducing gas. In this study, the effects of particle size of sorbents, temperature of sulfidation, flow rate and sorbent characteristics on the $H_2S$ removal efficiency of calcined manganese ore were investigated. Experimental results showed that the removal efficiency of $H_2S$ was optimum when the temperature was about 800$\circ$C and that the smaller particle size the higher the $H_2S$ removal efficiency. When the temperature was above 800$\circ$C, the reactivity of sorbent has lowered because agglomeration of sorbent increased intraparticle transport resistance, and this phenomenon was confirmed by SEM photographs. As the temperature increases, capacity for the $H_2S$ removal was increased but the equilibrium concentration of $H_2S$ was not affective.

• KDI Journal of Economic Policy
• /
• v.42 no.3
• /
• pp.1-32
• /
• 2020

This paper studies urban growth in Korean cities. First, I document that population growth patterns change over time and that the current population distribution supports random urban growth. I confirm two empirical laws-Zipf's law and Gibrat's law-both of which hold in the period of 1995-2015, but do not hold in the earlier period of 1975-1995. Second, I find a systematic employment growth pattern of Korean cities in spite of the random population growth. I examine market access effects on employment growth. Market access, a geographical advantage, has a significant influence on urban employment growth. The market access effect is higher in the Seoul metropolitan area than in the rest of the country. This effect is stronger on employment growth in the manufacturing industry compared to employment growth in the service industry. These results are robust with various checks (e.g., different definitions of urban areas). The results here suggest that policymakers should consider geographical characteristics when they make policy decisions with respect to regional development.

• Proceedings of the Korean Powder Metallurgy Institute Conference
• /
• 2006.09a
• /
• pp.654-655
• /
• 2006

This is about the effects deoxidization, carbonization and alloying preparation on fine grain W, WC, and grade YG8 powder reduced by "yellow tungsten oxide" and "blue tungsten oxide". The result indicates that yellow tungsten has single composition and blue tungsten oxide has complex composition. With this feature, yellow tungsten oxide got better uniformity and concentration distribution on fine particle size W and WC powder than blue tungsten oxide's. The grade alloy YG8 that made of this W or WC powder has uniform alloy construction, concentrated WC grain distribution and better alloy properties.

• Proceedings of the Korean Powder Metallurgy Institute Conference
• /
• 2006.09a
• /
• pp.424-425
• /
• 2006

The effects of reaction temperature and precursor concentration on the microstructure and magnetic properties of ${\gamma}-Fe_2O_3$ nanoparticles synthesized as final products of iron acetylacetonate in chemical vapor condensation (CVC) were investigated. Pure ${\gamma}-Fe_2O_3$ phase was obtained at temperature above $900^{\circ}C$ and crystallite size of ${\gamma}-Fe_2O_3$ nanoparticles decreased with lowering precursor concentration. Also, the coercivity decreases with decreasing crystallite size of nanopowder. The lowest coercivity was 7.8 Oe, which was obtained from the ${\gamma}-Fe_2O_3$ nanopowder sample synthesized at precursor concentration of 0.3M. Then, the crystallite size of ${\gamma}-Fe_2O_3$ nanoparticles was 8.8 nm.