• The Journal of Korean Association of Computer Education
• /
• v.16 no.3
• /
• pp.89-98
• /
• 2013

In order to effectively manage after-school works from 2011, NEIS after-school system has been developed and operated. As NEIS after-school system that has been currently operating will need to analyze the effectiveness, it makes the use of this system activate. After-school elementary school teacher 273 people survey of 11 school district of the Seoul Metropolitan Office of Education was commissioned. 116 teachers participated in the survey. NEIS after-school system showed a reduction in task processing time (M = 3.92) were higher than that of most complaints about paperwork (M = 3.82), work efficiency (M = 3.81), the accuracy of your work (M = 3.76) in the order of many complaints were.

• Korean Journal of Child Studies
• /
• v.30 no.6
• /
• pp.281-295
• /
• 2009

Representative services of the afterschool in Korea are After-Schools of the Ministry of Education, Science and Technology, Community Child Centers, After-school Child Care, and Youth After-school Academy of the Ministry of Health, Welfare and Family. Each service is distinguished with its own founded laws, subject children, specialists, principle management agent, a number of participants, and more. Research issues of afterschool are development of new afterschool programs, evaluatjon of the effectiveness of the afterschool, establishment of policies related to cooperative efforts among the different services of the afterschool, obtainment of legal status, and enhancement of the credential of its personnels. To guarantee the quality of the Afterschool and improve personnels' working conditions, various means are to be implemented. In regard to programatic and policy issues, the afterschool is needed to establish a system for training the afterschool coordinators and of its accreditation and to develop more child-centered afterschool programs. Also, it is needed to legislate fundamental law and consolidate communication system among the services of the Afterschool in pursue of their effective utilization and actual expansion.

• Journal of Fisheries and Marine Sciences Education
• /
• v.25 no.4
• /
• pp.781-800
• /
• 2013

The purpose of this study was to investigate perception of primary school teachers about operation of after-school computer class. Research questions were set up as follows: First, what type is preferred on the operation type for after-school computer class? Second, what is the perception about the adequacy of contents for after-school computer class? Third, what is the perception about instructors' expertise? Fourth, what is the perception about the effects of after-school computer class? Finally, what is the perception about facilities/ equipment and evaluation system of after-school computer class? To figure out these questions, this study conducted literature review and questionnaire survey. The results of this study are as follows: First, approximately 82% of respondents preferred to have after-school computer class operated by outsourced agency. Second, overall, the perceptions about the operation of after-school computer class were positive: The adequacy of contents, instructors' expertise, the effects, facilities/ equipment and evaluation system are seen as mostly positive. Third, its differences between school self-operated computer class and private sector computer class were insignificant. Fourth, its differences among various sizes of the school were significant. The implementaion of after-school computer class was considered as more positive in small schools. Finally, researchers suggested that it was necessary to develop an plan considering school sizes for more efficient implementation of after-school computer class.

• Journal of Family Resource Management and Policy Review
• /
• v.18 no.1
• /
• pp.141-162
• /
• 2014

The purpose of this research is to suggest some measures to improve policy issues by analyzing policy related to a child care service program in the community. Gilbert and Terrell's social policy analysis framework is used to analyze an after-school care service program for elementary school children. Furthermore, the Elementary Care Class(including the After-school Program), Youth After-school Academy, and Community Child Center, referred to as public care services, are employed to analyze community care service programs for children. The Elementary Care Class, Youth After-school Academy and Community Child Center are very similar in terms of the contents and application of the care service program for children, and mainly serve children in low-income groups. In addition, although user overlapping is an inevitable problem because the operating time of the Elementary Care Class and After-school Program coincides with that of the Youth After-school Academy and Community Child Center, it is structurally very hard to adjust the content of service, operating time, and so on because of differences in the delivery system for each program. Therefore, it is necessary to generate a unified delivery system to manage after-school care service programs for children and create a new special control tower to solve these problems. Furthermore, it is needed to extend the services to children from general double-income family, which is a blind spot of the care service.

• The Journal of Advanced Prosthodontics
• /
• v.12 no.6
• /
• pp.329-337
• /
• 2020

PURPOSE. To verify the influence of computer-aided design/computer-aided manufacturing (CAD/CAM) implant-supported prostheses manufactured with cobalt-chromium (Co-Cr) and zirconia (Zr), and whether ceramic application, spark erosion, and simulation of masticatory cycles modify biomechanical parameters (marginal fit, screw-loosening torque, and strain) on the implant-supported system. MATERIALS AND METHODS. Ten full-arch fixed frameworks were manufactured by a CAD/CAM milling system with Co-Cr and Zr (n=5/group). The marginal fit between the abutment and frameworks was measured as stated by single-screw test. Screw-loosening torque evaluated screw stability, and strain analysis was explored on the implant-supported system. All analyses were performed at 3 distinct times: after framework manufacturing; after ceramic application in both materials' frameworks; and after the spark erosion in Co-Cr frameworks. Afterward, stability analysis was re-evaluated after 106 mechanical cycles (2 Hz/150-N) for both materials. Statistical analyses were performed by Kruskal-Wallis and Dunn tests (α=.05). RESULTS. No difference between the two materials was found for marginal fit, screwloosening torque, and strain after framework manufacturing (P>.05). Ceramic application did not affect the variables (P>.05). Spark erosion optimized marginal fit and strain medians for Co-Cr frameworks (P<.05). Screw-loosening torque was significantly reduced by masticatory simulation (P<.05) regardless of the framework materials. CONCLUSION. Co-Cr and Zr frameworks presented similar biomechanical behavior. Ceramic application had no effect on the biomechanical behavior of either material. Spark erosion was an effective technique to improve Co-Cr biomechanical behavior on the implant-supported system. Screw-loosening torque was reduced for both materials after masticatory simulation.

• Journal of Korea Technical Association of The Pulp and Paper Industry
• /
• v.40 no.2
• /
• pp.37-42
• /
• 2008

Defects of corrugated board were limiting factors to the corrugated industry's growth. On-line detecting systems of defects are beneficial to increase profits of the corrugated board companies by reducing base paper consumption, increasing process reliability, and increasing productivity. By replacing naked eye inspection of defects to a defects detecting system, continuous inspection without fatigue may guarantee final products quality. The system was developed, which was consisted of line scan CCD camera, lens, illuminating parts, high speed image processor, software, various input parts, and output parts. First installation location of the system was at before fluting process after base paper unwinding, and surface of liner board was inspected by the system. Second installation location was after fluting process and combining process for liner board. Production loss includes ragged appearance of edge, irregular flute shape, wrong combination of flute, score cracking, defects in base paper, and flute cracking. The production loss was analyzed before and after the system installation at a commercial domestic mill. The production loss ratio was defined as a production loss weight per total production weight. The production loss ratio before the installation was decreased a lot from 1.28%(during 3 months before installation) to 0.76%(during 12 months after the first installation) and to 0.25%(during 6 months after the second installation).

• Journal of Korean Society of Forest Science
• /
• v.108 no.2
• /
• pp.269-275
• /
• 2019

The aim of our study was to compare the wound responses and fine root development after root cutting and wound dressing among different tree species. The roots (2~4 cm in diameter) of mature Pinus densiflora, Prunus serrulata var. spontanea, and Zelkova serrata grown in Sangju, South Korea, were cut every 6 months from May 2014 to November 2016. The cut roots were subjected to pastes of vaseline and organic fertilizer. Six months after cutting, fine root development in the cut roots was examined. There was a significant increase in the fine root development in P. serrulata and Z. serrata; however, the development was rarely observed in P. densiflora. Zelkova serrata showed the highest fine root development among the three species in both the control and organic paste treatment groups. No significant differences in fine root development were observed in P. serrulata among the treatments. These results indicate that different tree species exhibit different responses to wound dressing after root cutting, which suggests that specific treatments must be applied to specific tree species.

• Journal of the Korean Arthroscopy Society
• /
• v.12 no.1
• /
• pp.66-68
• /
• 2008

Recently, devices using radiofrequency energy have been developed for arthroscopic soft tissue ablation, cauterization and shrinkage. After ACL reconstruction operation, articular metallic foreign body was found in the post-operative radiographs. It was proven to be the tip of bipolar radiofrequency system after foreign body removal. After that we experienced 2 more cases during the acromioplasty procedure. We requires attention to prevent the separation of the tip from the body in the arthroscopic surgery using bipolar radiofrequency system.

• 제어로봇시스템학회:학술대회논문집
• /
• 1997.10a
• /
• pp.585-588
• /
• 1997

This paper presents a construction method of logic-based switching control system which operates in widely changing environments. The logic-based switching controller is composed of a family of candidate controllers together with a supervisor. The system does not require any identification schemes of environments. Switching from one candidate controller to another is carried out based on monitoring the output of the system. The basic ideas of adaptation are as follows: (1)each candidate controller is prepared for each environment in advance; (2)the supervisor applies a sequence of speculative controls to a plant with candidate controllers just after the control has started and just after the change of the environment has been detected. It is important that each candidate controller can keep the system stable during a sequence of speculative controls, and the most appropriate candidate controller for the environment to which the system is exposed can be selected before the last speculative control is ended. An application to an antiskid braking system clarifies the effectiveness of the proposed method.

• The korean journal of orthodontics
• /
• v.52 no.5
• /
• pp.354-361
• /
• 2022

Objective: To analyze the overall treatment effects in terms of the amount of uprighting with changes in the three-dimensional positions of the mandibular posterior teeth after applying the biocreative reverse curve (BRC) system. Methods: Thirty-four patients (mean age, 20.5 ± 8.56 years) were treated using the BRC system (mean period, 8.17 ± 2.19 months). Cone-beam computed tomography was performed before treatment and after treatment with the BRC system. The three-dimensional movement of each tooth was analyzed in the coordinate system at points on the crown and root apex. A paired t-test was used to analyze the treatment effects of the BRC system. Results: The application of the BRC system spanning from the first premolar to the second molar resulted not only in buccal and distal uprighting, but also in increased buccal and distal tipping of the teeth. The premolars and the first molar were extruded, and the second molar was intruded. Conclusions: When the BRC system is applied, simultaneous distal and buccal uprighting of the premolars and molars can be achieved bilaterally using a temporary skeletal anchorage device without unnecessary movement of the anterior teeth.