• 한국추진공학회:학술대회논문집
• /
• 한국추진공학회 2008년 영문 학술대회
• /
• pp.275-282
• /
• 2008

This paper presents numerical investigation of multi-phase flow in solid rocket motor nozzle and effect of multi-phases on the performance prediction of the Solid Rocket Motor. Aluminized propellants are frequently used in solid rocket motors to increase specific impulse. An Eulerian-Lagrangian description has been used to analyze the motion of the micrometer sized and discrete phase that consist of the larger particulates present in the Solid Rocket Motor. Uniform particles diameters and Rosin-Rammler diameter distribution method has been used for the simulation of different burning of aluminum droplets generating aluminum oxide smokes. Roe-FDS scheme has been used to simulate the effects of the multi-phase flow. The results obtained show the sensitivity of this distribution to the nozzle flow dynamics, primarily at the nozzle inlet and exit. The analysis also provides effect of two phases on performance prediction of Solid Rocket Motor.

• Smart Structures and Systems
• /
• 제2권2호
• /
• pp.171-188
• /
• 2006

This paper deals with damage detection using active Lamb waves. The wavelet transform and empirical mode decomposition methods are discussed for measuring the Lamb wave's arrival time of the group velocity. An experimental system to diagnose the damage in the composite plate is developed. A method to optimize this system is also given for practical applications of active Lamb waves, which involve optimal arrangement of the piezoelectric elements to produce single mode Lamb waves. In the paper, the single mode Lamb wave means that there exists no overlapping among different Lamb wave modes and the original Lamb wave signal with the boundary reflection signals. Based on this optimized PZT arrangement method, five damage localizations on different plates are completed and the results using wavelet transform and empirical mode decomposition methods are compared.

• Wind and Structures
• /
• 제16권2호
• /
• pp.213-224
• /
• 2013

One of the key issues affecting the promotion of solar water heaters in Taiwan is the severe impact of typhoon each year. An experimental study was conducted to investigate the wind uplift characteristic of a solar collector model with and without a guide plate. The guide plate with different lengths and orientations with respect to wind direction was adopted. It is found that the wind uplift of a solar collector is associated with the tilt angle of the flat panel as expected. A cavity formed between the guide plate and the flat panel has a significant effect on the distributions of streamwsie and lateral pressure. Reduction in uplift is essentially coupled with the projected area of a guide plate on the lower surface of the tilt flat panel.

• Wind and Structures
• /
• 제17권5호
• /
• pp.537-552
• /
• 2013

Wind tunnel experiments were performed to study the wind loads on an inclined flat plate with and without a guide plate. Highly turbulent flow, which corresponded to free-stream turbulence intensity on the flat roof of low-rise buildings, was produced by a turbulence generation grid at the inlet of the test section. The test model could represent a typical solar collector panel of a solar water heater. There are up-stream movements of the separation bubble and side-edge vortices, more intense fluctuating pressure and a higher bending moment in the turbulent flow. A guide plate would result in higher lift coefficient, particularly with an increased projected area ratio of a guide plate to an inclined flat plate. The value of lift coefficient is considerably lower with increased free-stream turbulent intensity.

• KSII Transactions on Internet and Information Systems (TIIS)
• /
• 제15권3호
• /
• pp.1174-1192
• /
• 2021

With the assistance of non-orthogonal multiple access (NOMA), the spectrum efficiency and the number of users in cloud radio access network (CRAN) can be greatly improved. In this paper, the system performance of NOMA-assisted CRAN is investigated. Specially, the outage probability (OP) and ergodic sum rate (ESR), are derived for performance evaluation of the system, respectively. Based on this, by minimizing the OP of the system, a suboptimal power allocation (PA) scheme with closed-form PA coefficients is proposed. Numerical simulations validate the accuracy of the theoretical results, where the derived OP has more accuracy than the existing one. Moreover, the developed PA scheme has superior performance over the conventional fixed PA scheme but has smaller performance loss than the optimal PA scheme using the exhaustive search method.

• ETRI Journal
• /
• 제45권1호
• /
• pp.138-149
• /
• 2023

In this study, the problem of blind signal separation for coprime planar arrays is investigated. For coprime planar arrays comprising two uniform rectangular subarrays, we link the signal separation to the tensor-based model called coupled canonical polyadic decomposition (CPD) and propose an improved coupled trilinear decomposition approach. The output data of coprime planar arrays are modeled as a coupled tensor set that can be further interpreted as a coupled CPD model, allowing a signal separation to be achieved using coupled trilinear alternating least squares (TALS). Furthermore, in the procedure of the coupled TALS, a Vandermonde structure enforcing approach is explicitly applied, which is shown to ensure fast convergence. The results of Monto Carlo simulations show that our proposed algorithm has the same separation accuracy as the basic coupled TALS but with a faster convergence speed.

• ETRI Journal
• /
• 제46권3호
• /
• pp.421-431
• /
• 2024

In this study, a direct position tracking method for non-circular (NC) signals using distributed passive arrays is proposed. First, we calculate the initial positions of sources using a direct position determination (DPD) approach; next, we transform the tracking into a compensation problem. The offsets of the adjacent time positions are calculated using a first-order Taylor expansion. The fusion calculation of the noise subspace is performed according to the NC characteristics. Because the proposed method uses the signal information from the previous iteration, it can realize automatic data associations. Compared with traditional DPD and two-step localization methods, our novel process has lower computational complexity and provides higher accuracy. Moreover, its performance is better than that of the traditional tracking methods. Numerous simulation results support the superiority of our proposed method.

• Advances in aircraft and spacecraft science
• /
• 제11권1호
• /
• pp.1-21
• /
• 2024

The stiffness reduction of cross-ply composite laminates featuring a transverse cracking and delamination within the mid-layer is predicted through utilization of a modified shear-lag model, incorporating a stress perturbation function. Good agreement is obtained by comparing the prediction models and experimental data. The material characteristics of the composite are affected by fluctuations in temperature and transient moisture concentration distribution in desorption case, based on a micro-mechanical model of laminates. The transient and non-uniform moisture concentration distribution induces a stiffness reduction. The obtained results demonstrate the stiffness degradation dependence on factors such as cracks density, thickness ratio and environmental conditions. The present study underscores the significance of comprehending the degradation of material properties in the failure progression of laminates, particularly in instances of extensive delamination growth.

• 한국항공우주학회지
• /
• 제42권1호
• /
• pp.67-75
• /
• 2014

항우연에서는 복합재 소형항공기(KC-100)에 대하여 15가지 전기체 시험조건과 7개의 국부적 시험조건들에 대한 전기체 정적구조시험을 수행하였다. 시험요구도, 시험일정, 시험체 및 더미구조, 시험하중산출, 시험장치, 시험장비 등을 소개하였다. 수십개의 제어채널을 사용하는 전기체 구조시험의 하중제어의 정확도를 살펴보기 위하여 U1의 시험데이터를 분석하였다. 분석결과 각 채널별 데이터 획득된 하중값은 허용오차인 SNPE(Static null pacing error)값 이내에서 잘 유지하고 있음을 보였고 본 논문의 저자가 제안한 시험의 하중제어오차 크기 정의방법을 적용한 결과 U1 시험의 하중제어 오차값이 8.6N 이었고 나머지 전기체 시험조건들에 대한 시험데이터를 분석한 결과도 보였다. 마지막으로 U1시험에서 자세제어장치에서 측정된 반력들이 시험하중 증가와 함께 변하는 것을 보였고 전기체 구조시험에서 반력변화 발생의 요인들에 대하여 기술하였다.

• 항공우주시스템공학회지
• /
• 제16권3호
• /
• pp.84-92
• /
• 2022

전기-정유압식 작동기(EHA)는 독립적으로 유동력원을 운용함에 따라, 복잡한 유압 배관을 제거할 수 있어 누유 및 중량 최소화, 안전성 향상의 장점이 있어 최근 항공기용 비행제어 분야에서 사용되고 있다. 이러한 EHA를 탑재하는 항공기의 경우, 기존 중앙 유압시스템을 탑재한 항공기에 비해 제한된 냉각원에 따른 EHA의 열관리 이슈가 대두된다. 이러한 열관리 이슈의 해결을 위해서는, EHA의 열특성을 예측할 수 있는 열해석 모델이 필요하다. 본 연구에서는 유압펌프 및 전기모터로 구성되는 EHA 유압동력모듈의 내부 회전체를 고압 하에서 고속으로 회전이 가능하도록, 유압동력모듈 내부에 유체 순환 회로를 적용하였다. 적합한 열해석 모델을 구축하고, 유냉식 또는 비유냉식 유압동력모듈 적용에 따른 해석 결과의 비교 및 검토를 통해 EHA의 열특성 영향성을 확인하고자 하였다.