• Fire Science and Engineering
• /
• v.20 no.3 s.63
• /
• pp.65-70
• /
• 2006

From the beginning of the construction stage, the fire protection regulation for the nuclear power plants conforms to the design requirements for the acquisition of the license permit. This regulation is based on the plant status of the normal operation, but it is not enough to be used as an application standard for fire protection at the transient mode of the plant and the outage time for refueling as well as for the plant decommissioning. While the advanced fire protection requirement that has been developed in America recently suggests the performance-based requirement and management rule applicable to the overall life time of the plant, it simply represents the conceptual application. It means that it can not be treated as appropriate standards because it does not deal with the qualitative and quantitative approach in specific ways. By the way, with the use of the performance-based fire risk analysis, the dynamic behavior of the heat and smoke at the fire compartment of the nuclear power plants can be analyzed and the thermal effect to the safety-related equipment and cables can be evaluated as well. At this paper, it suggests the ways to change the applicable fire protection regulations and the required evaluation items for the fire risk resulted from the plant configuration change with an intent to introduce the state-of-the-art quantitative fire risk analysis technology at the domestic nuclear power plants.

• The Journal of the Convergence on Culture Technology
• /
• v.9 no.3
• /
• pp.817-823
• /
• 2023

Manufacturing plants face the challenge of reducing energy use in response to climate change. Reducing energy consumption can be seen as one of the most important issues, such as reducing production costs and improving efficiency. Among manufacturing industries, the increase in energy consumption in the food industry is gradually increasing along with the improvement of the standard of living and the increase in population. In order to save energy in food processing plants, it is important to identify and analyze energy consumption characteristics in energy-consuming processes. Prior to this, it is necessary to monitor and analyze existing energy consumption to derive reduction measures. In this study, a small and medium-sized food processing plant producing processed meat products was used as a case study to identify and analyze the energy consumption structure at typical cycle/stage level of the batch heating process. From this, we tried to establish realistic and quantitative goals that can be obtained under individual process operating conditions. The results of this study will be used as basic data for the development of diffusion and pervasive energy saving FEMS technology for common core processes of food factories of small and medium-sized enterprises in the future.

• KOREAN JOURNAL OF CROP SCIENCE
• /
• v.26 no.1
• /
• pp.1-31
• /
• 1981

Experiments were conducted to investigate rice varietal response to low water and air temperatures at different growth stages from 1975 to 1980 in a phytotron in Suweon and in a cold water nursery in Chooncheon. Germination ability, seedling growth, sterility of laspikelets, panicle exertion, discoloration of leaves, and delay of heading of recently developed indica/japonica cross(I/J), japonica, and indica varieties at low air temperature or cold water were compared to those at normal temperature or natural conditions. The results are summarized as follows: 1. Practically acceptable germination rate of 70% was obtained in 10 days after initiation of germination test at 15\circ_C for japonica varieties, but 15 days for IxJ varieties. Varietal differences in germination ability at suboptimal temperature was greatest at 16\circ_C for 6 days. 2. Cold injury of rice seedlings was most severe at the 3.0-and 3.5-leaf stage and it was reduced as growth stage advanced. A significant positive correlation was observed between cold injury at 3-leaf stage and 6-leaf stage. 3. At day/night temperatures of 15/10\circ_C seedlings of both japonica and I/J varieties were dead in 42 days. At 20/15\circ_C japonica varieties produced tillers actively, but tillering of I/J varieties was retarded a little. At 25/15\circ_C, both japonica and I/J varieties produced tillers most actively. Increase in plant height was proportional to the increase in all varieties. 4. In I/J varieties the number of differentiated panicle rachis branches and spikelets was reduced at a day-night temperature of 20-15\circ_C compared to 25-20 or 30-25\circ_C, but not in japonica varieties although panicle exertion was retarded at 20-15\circ_C. The number of spikelets was not correlated with the number of primary rachis branches, but positively correlated with that of secondary rachis branches. 5. Heading of rice varieties treated with 15\circ_C air temperature at meiotic stage was delayed compared to that at tillering stage by 1-3 days and heading was delayed as duration of low temperature treatment increased. 6. At cold water treatment of 17\circ_C from tillering to heading stage, heading of japonica, I/J, and cold tolerant indica varieties was delayed 2-6, 3-9, and 4-5 days, respectively, Growth stage sensitive to delay of heading delay at water treatment were tillering stage, meiotic stage, and booting tage in that order, delay of heading was greater in indica corssed japonica(Suweon 264), japonica(Suweon 235), and cold tolerant indica(Lengkwang) varieties in that order. Delay of heading due to cold water treatment was positively correlated with culm length reduction and spikelet sterility. 7. Elongation of culms and exertion of panicles of rice varieties treated with low air temperature 17\circ_C. Culm length reduction rate of tall varieties was lower than that of short statured varieties at low temperature. Panicle exertion was most severaly retarded with low temperature treatment at heading stage. Generally, retardation of panicle exertion of 1/1 varieties was more severe than that of japonica varieties at low temperature. There was a positive correlation between panicle exertion and culm length at low temperature. 8. The number of panicles was increased with cold water treatment at tillering stage, but reduced at meiotic stage. As time of cold water treatment was conducted at earlier growth stage, culm length was shorter and panicle exertion poorer. 9. Sterility of all rice varieties was negligible at 17\circ_C for three days but 30.3-85.2% of strility was observed for nine-day treatment at 17\circ_C. Among the tested varieties, sterility of Suweon 264 and Milyang 42 was highest and that of Suweon 290 and Suweon 287 was lowest. The most sensitive growth stage to low temperature induced sterility was from 15 to 5 days before heading. There was positive correlation between sterility of rice plants treated with low temperature at meiotic and heading stage. 10. Percentage of spikelet sterility was greatest at cold water treatment at meiotic stage (auricle distance -15～-10cm) and it was higher in 1/1 (Suweon 264, Joseng tongil), japonica (Nongbaek, Towada), and cold tolerance indica(Lengkwang) varieties in the order. Level of cold water and position of young-ear affected on the sterility of varieties at meiotic stage; percentage of spikelet sterility of variety, Lengkwang, of which young-ear was located above the cold water level was high, but that of short statured variety, Suweon 264, of which young-ear was located in the cold water was lower. 11. Percentage of ripened grains was not reducted at 15\circ_C air temperature for three days at full heading stage in all varieties. However, at six-day low temperature treatment Suweon 287, Suweon 264 showed percentage of ripended grains lower than 60%, but at nine-day low temperature treatment all varieties showed percentage of ripened grains lower than 60%. Low temperature treatment of 17\circ_C from 10 days after heading for 20 days did not affect on the ripening of all varieties. 12. Uptake of nitrogen, phosphorous, potassium, calcium, and magnesium in whole plants was higher at average air temperature of 25\circ_C, but concentration of the elements was lower compared to those at 19\circ_C. However, both total uptake and concentration of manganese were higher at 19\circ_C compared to 25\circ_C. 13. Higher application of nitrogen, phosphorus, silicate, and compost increased yield of rice due to increased number of panicles and spike let fertility in cold water irrigated paddy.

• Journal of Dairy Science and Biotechnology
• /
• v.14 no.1
• /
• pp.1-15
• /
• 1996

With the starting of Uruguay Round(UR) and World Trade Organization(WTO), the direction of trade in world market has been setting up with the beginning of an opening age. However, world nations has been expressed a deep concern on the marketing and the circulations of unsafe foods, especially in the international trade of food products. Therefore, administration of most countries are taking a firm step on the safety of imported food products. The implementation of hazard analysis critical control point(HACCP) system in food industry is strongly appeared on the world stage at this point. Major international organizations, such as WHO, WTO, and EC have been recognized the importance of HACCP and already documented on their future plan for standardization of food safety in the international trade of food products by means of the this system. Several advanced countries have already developed HACCP system for the food industry and have been producing food products under this system. Now they have proposed rulemakings on a mandatory HACCP program in the production of domestic and imported food products. However, with the lacking of knowledge and information on the HACCP, there has been no actions for applying this system in the food industry of Korea. It is a very clear fact that Korean dairy and food industry will be faced on serious problems in exporting food products without applying HACCP system in the very near future. The objective of this article is to introduce the world trend. necessity, and application of HACCP system in food and dairy industry. Also a HACCP system developed by one dairy processing plant in Europe will be demonstrated as a moldel system.

• Journal of the Korea Concrete Institute
• /
• v.22 no.6
• /
• pp.817-824
• /
• 2010

The concrete containment structures have been widely used in nuclear power plants, LNG storage tanks, etc., due to their high safety and economic efficiency. The containment structure consists of a bottom slab, wall, ring beam and dome. The shape of the roof dome has a very significant effect on structural safety, the quantity of materials, and constructability; the thickness and curvature of the dome should therefore be determined to give the optimum design. The ring beam plays the role as supports for the dome, resulting in a minimized deformation of the wall. The main issues in designing the ring beam are the correct dimensions of the section and the prestress level. In this study, an efficient design procedure is proposed that can be used to determine an optimal shape and prestress level of the dome and ring beam. In the preliminary design stage of the procedure, the membrane theory of shells of revolution is adopted to determine several plausible alternatives which can be obtained even by hand calculation. Based on the proposed procedures, domes and ring beams of the existing domestic containment structures are analyzed and some improvements are discussed.

• Horticultural Science & Technology
• /
• v.31 no.3
• /
• pp.359-365
• /
• 2013

Chrysanthemum is one of the most popular ornamental plants worldwide. Recently, lots of new and novel chrysanthemum varieties have been developed using mutagenesis. However, there was no study for comparison of tissue culture condition among the mutant varieties derived from one original variety, until now. This study was conducted to compare the efficient regeneration condition of the two chrysanthemum mutant varieties, 'ARTI-purple' and 'ARTI-queen'. Two different flower parts (disk and ray florets) at the unopened and early blooming stages were used for comparison of regeneration condition on MS medium supplemented with combinations of three growth regulators (BA, NAA, and IAA). The highest regeneration rate was identified on the NAA and BA combination when the disk florets at unopened blooming stage are used. The best optimum combinations of growth regulators were identified as NAA $1.0mg{\cdot}L^{-1}$ and BA $0.5mg{\cdot}L^{-1}$ at 'ARTI-purple', which displayed 47.9% regeneration. However, regeneration of 'ARTI-queen' was the highest as 25.6% at NAA $2.0mg{\cdot}L^{-1}$ and BA $1.0mg{\cdot}L^{-1}$. There results indicate that there is a difference for the optimum regeneration condition between the mutant varieties derived from one original variety. These results will be useful for construction of efficient regeneration system of diverse chrysanthemum mutants developed by mutation breeding.

• Proceedings of the Korean Society of Crop Science Conference
• /
• 2017.06a
• /
• pp.238-238
• /
• 2017

Salt stress is one of the deteriorating abiotic stresses due to the climate change, which causes over-accumulation of $Na^+$ and $Cl^-$ ions in plants and inhibits the growth and yield of rice especially in coastal Southeastern Asia. The yield components of rice plant (panicle number, spikelet number per panicle, 1000-grain weight, % of ripened grains) that are majorly affected by salt stress vary with growth stages at which the plant is subjected to the stress. In addition, the salt sensitivity of each yield component differs among rice varieties even when the salt-affected growth stage was same, which indicates that the physiological mechanism to maintain each yield component is different from each other. Therefore, we hypothesized that rice plant has different genes/QTLs that contribute to the maintenance of each yield component. Using a Japanese leading rice cultivar, Koshihikari, and salt-tolerant Nona bokra's chromosome segment substitution lines (CSSLs) with the genetic background of Koshihikari (44 lines in total) (Takai et al. 2007), we screened higher yielding CSSLs under salinity in comparison to Koshihikari and identified the yield components that were improved by the introgression of chromosome segment(s) of Nona bokra. The experiment was conducted in a salinized paddy field. One-month-old seedlings were transplanted into a paddy field without salinity. These were allowed to establish for one month, and then the field was salinized by introducing saline water to maintain the surface water at 0.4% salinity until harvest. The experiments were done twice in 2015 and 2016. Although all the CSSLs and Koshihikari decreased their yield under salinity, some CSSLs showed relatively higher yield compared with Koshihikari. In Koshihikari, all the yield components except panicle number were decreased by salinity and % of ripened grains was mostly reduced, followed by spikelet number per panicle and 1000-grain weight. When compared with Koshihikari, keeping a higher % of ripened grains under salinity attributed to the significantly greater yield in one CSSL. This indicated that the % of ripened grains is the most sensitive to salt stress among the yield components of Koshihikari and that the Nona bokra chromosome segments that maintained it contributed to increased yield under salt stress. In addition, growth analyses showed that maintaining relative growth rate in the late grain filling stage led to the increased yield under salt stress but not in earlier stages.

• Journal of Radiation Industry
• /
• v.6 no.2
• /
• pp.189-197
• /
• 2012

This study was carried out to develop the improved useful mutants for yield or composition of stevia plants using the gamma ray or chemical mutagens treatments. The seeds of stevia 'Suwon No. 11' were irradiated up to 400 Gy of gamma ray. Chemical mutagens were treated on the seeds of the 'Suwon No. 11' using 0.07% colchicine, 10 mM sodium azide, or 10 mM NMU for various durations. The germination rate, and shoot and root growth of seedling were estimated at 30 days after gamma ray irradiation or chemical mutagen treatment, and the plant height, the number of branches, and leaf length and width were examined at 3 months after mutagenesis treatments. In the case of gamma ray treatments, the germination rate and early-stage growth were decreased as the increase of radiation dose, and the 50% lethal dose was found to be 200 Gy. the plant height was decreased as the increase of radiation dose, while the number of branches per plant and leaf length were increased. Leaf shape was modified to the relatively longer one compared to the control, which was identified more apparently at the treatments of higher than 150 Gy. In the treatment of chemical mutagens, the rate of germination and survival were decreased as the increase of incubation time. The 50% lethal dose for germination rate were identified as the conditions of the 15 hours incubation in 0.07% colchicine, the 4 hrs in 10 mM sodium azide, and the 2 hrs in 10 mM NMU, in the three chemical mutagens treatments. Chemical mutagens had no influence on shoot growth, while root growth was increased, especially as the incubation time was extended. The highest root growth occurred in the NMU treatment at 6 hrs incubation time. The plant height was decreased as the increase of incubation time in the chemical mutagens treatments. Among the chemical mutagens, NMU was the most effective to induce the mutants with long-shaped or the least lobed leaves.

• Journal of Appropriate Technology
• /
• v.7 no.2
• /
• pp.127-135
• /
• 2021

To respond to the threat of global warming, countries around the world are promoting the spread of renewable energy and reduction of carbon emissions. In accordance with the United Nation's Sustainable Development Goal to combat climate change and its impacts, global automakers are pushing for a full transition to electric vehicles within the next 10 years. Electric vehicles can be a useful means for reducing carbon emissions, but in order to reduce carbon generated in the stage of producing electricity for charging, a power generation system using eco-friendly renewable energy is required. In this study, we propose a smart electric mobility operating system integrated with off-grid solar power plants established in Tanzania, Africa. By applying smart monitoring and communication functions based on Arduino-based computing devices, information such as remaining battery capacity, battery status, location, speed, altitude, and road conditions of an electric vehicle or electric motorcycle is monitored. In addition, we present a scenario that communicates with the surrounding independent solar power plant infrastructure to predict the drivable distance and optimize the charging schedule and route to the destination. The feasibility of the proposed system was verified through test runs of electric motorcycles. In considering local environmental characteristics in Tanzania for the operation of the electric mobility system, factors such as eco-friendliness, economic feasibility, ease of operation, and compatibility should be weighed. The smart electric mobility operating system proposed in this study can be an important basis for implementing the SDGs' climate change response.

• Proceedings of the Korean Society of Crop Science Conference
• /
• 2017.06a
• /
• pp.237-237
• /
• 2017

Rice is highly sensitive to salt stress especially in its early growth stage, which thus is one of the major constraints in rice production. In rice plants, salt sensitivity is associated with the accumulation of $Na^+$ in the shoots, especially in the photosynthetic tissues. High salt concentrations in soil cause high $Na^+$ and $Cl^-$ transport to the shoot and preferential accumulation of those ions in older leaves, which decreases $K^+$ in the shoot, photosynthetic activity and grain yield. Salt exclusion capacity at the leaf sheath is therefore considered to be one of the main mechanisms of salt tolerance. In addition, it is suspected that the lamina joint might be involved in the salt transport from leaf sheath to leaf blade. This research aims to determine if leaf sheaths of rice exclude a large amount of $Na^+$ only or other ions such as $K^+$, $Ca^{2+}$, $Mg^{2+}$, and $Cl^-$ as well, to identify tissues in the leaf sheath, which accumulate $Na^+$, and to examine if the lamina joint is involved in the salt exclusion by the leaf sheath. The rice seedlings of salt tolerant genotype FL478 and salt sensitive genotype IR29 were independently treated with NaCl, KCl, $MgCl_2$ and $CaCl_2$, and Taichung 65 and its near-isogenic liguleless line (T65lg) were treated with NaCl. Then, the content of $Na^+$, $K^+$, $Ca^{2+}$, $Mg^{2+}$, and $Cl^-$ ions and their specific location were determined using Atomic Absorption Spectrometer, Ion Chromatograph, and Energy Dispersive X-ray Spectroscopy. Results showed that leaf sheaths of FL478 and IR29 accumulated a large amount of $Na^+$, $K^+$, $Ca^{2+}$, $Mg^{2+}$, and $Cl^-$ ons, and thus excluded them from leaf blades when treated with high concentration of each salt. When treated with NaCl, the highest $Na^+$ concentration was found in the basal part of leaf sheaths of both cultivars. Moreover, energy-dispersive X-ray spectroscopy revealed that the central parenchyma cells of the leaf sheath were the site where most Na, Cl, and K were retained under salinity in the salt tolerant genotype FL478. Also, the concentration of $Na^+$, $K^+$ and $Cl^-$ ions in leaf sheaths and leaf blades was comparable between T65 and T65lg, indicating that the lamina joint may not be involved in the exclusion of $Na^+$, $Cl^-$ and $K^+$ by the leaf sheath from the leaf blade under salinity. Therefore, we conclude that the central parenchyma cells of basal part of leaf sheath are the site that plays a physiological role to exclude $Na^+$ in the shoots of rice without the involvement of the lamina joint.