• The korean journal of orthodontics
• /
• v.17 no.1
• /
• pp.63-72
• /
• 1987

This is to investigate the difference between craniofacial correlation of Angle's class III malocclusion and that of normal occlusion. For this investigation, 28 adult males and famales, who have class III malocclusion, and 35 adult males and 46 adult famals., who have normal occlusion were selected to measure actual dimension of cranial base and to investigate ratio of various parts of maxillofacial skeleton against cranial base. Class III malocclusion were, also , classified based on SNA and SNB angle in normal range. Results were as follows. 1. In class III malocclusion, actual dimension of cranial base were appeared to be less than normal occlusion in both sex. 2. In class III malocclusion, values were less than normal occlusion in BN/ptm-A in both sex, but had no significance between two. 3. In class III malocclusion, ramal inclination, mandible inclination, BN/Go-Pog, lower genial angle were appeared to be greater. Thus, characteristic mandibular protrusive appearance of class III malocclusion was due to relative ratio and morphologic characteristic of mandibular body dimension against cranial base. 4. In class III malocclusion, upper incisors were labially tilted and lower incisors were lingually tilted compared to normal occlusion. 5. In typing of class III malocclusion, the most common type was found to be one which maxillas were in normal range, while mandibles were in protrusive tendency.

• The korean journal of orthodontics
• /
• v.16 no.1
• /
• pp.107-118
• /
• 1986

This study was designed to investigate the variation of mandibular pattern and cranial base and their association in the craniofacial malocclusion. The material was the 165 cephalometric radiographs taken from craniofacial malocclusion. The sample was devided into two groups by age child group aged from 10 to 13 years and adult group aged over 18 years, and each group was devided into 3 types of malocclusion; class I, Class II div. 1 and Class III malocclusion. Child group consist of 35 samples and adult group consist of 20 samples in each malocclusion type. Various angular and linear measurements on the cephalometric radiographs were recorded and statistically analyzed. The results of the study were as follows; 1. The cranial base angle was largest in Class II div. 1 malocclusion and smallest in Class III malocclusion 2. The anterior cranial base length was largest in Class II div. 1 malocclusion but posterior cranial base length did not show statistical difference. 3. The mandibular body length of Class III malocclusion was larger than those of Class I and Class II div. 1 malocclusion in the adult group but did not shown difference in the child group. The ramus height of Class III malocclusion was larger than those of Class I and Class II div. 1 malocclusion in the child and adult group, but there were no difference between Class I and Class II div. 1 malocclusion. 4. The mandibular position was showed low correlation with the cranial base angele.

• Journal of the Korean Association of Oral and Maxillofacial Surgeons
• /
• v.35 no.4
• /
• pp.221-228
• /
• 2009

The purpose of the study was to investigate the characteristics of the pronunciation of Korean vowels in patients with class III malocclusion. 11 adult male patients with class III malocclusion(mean ages 22.3 years) and four adult males with normal occlusion(mean ages 26.5 years) were selected for the analysis of eight Korean monophthongs /ㅣ, ㅔ, ㅐ, ㅏ, ㅓ, ㅗ, ㅡ, ㅜ/. The values and relationships of F1, F2 and F3 were derived from the stable section of target vowel in each sentence, and the analysis using formant plots and vowel triangles' distance and area was conducted to find the features of two groups' vowel distributions. Consequently, it was identified that the pronunciation of males patients with class III malocclusion showed high values of F1 in the low vowels, high values of F2 in the back vowels, and remarkably low position of /ㅏ/. The vowel triangle suggested that the triangle areas of male patients with class III malocclusion were shown wider vertically and narrower horizontally than those of males with normal occlusion. These characteristics could reflect the structural features of class III malocclusion such as the prognathic mandible, low tongue position, and advancement of back position of the tongue.

• The korean journal of orthodontics
• /
• v.50 no.5
• /
• pp.304-313
• /
• 2020

Objective: The aim of this study was to evaluate the stability of bimaxillary surgery involving bilateral intraoral vertical ramus osteotomy performed with or without presurgical miniscrew-assisted rapid palatal expansion (MARPE) in adult patients with skeletal Class III malocclusion. Methods: A total of 40 adult patients with skeletal Class III malocclusion were retrospectively divided into two groups (n = 20 each) according to the use of MARPE for the correction of transverse maxillomandibular discrepancy during presurgical orthodontic treatment. Serial lateral cephalograms and dental casts were analyzed until 6 months after surgery. Results: Before presurgical orthodontic treatment, there was no significant differences in terms of sex and age between groups. However, the difference of approximately 3.1 mm in the maxillomandibular intermolar width was statistically significant (p < 0.001). Two days after surgery, the mandible had moved backward and upward without any significant intergroup difference. Six months after surgery, the maxillary intercanine (2.7 ± 2.1 mm), interpremolar (3.6 ± 2.4 mm), and intermolar (2.0 ± 1.3 mm) arch widths were significantly increased (p < 0.001) relative to the values before presurgical orthodontic treatment in the MARPE group; these widths were maintained or decreased in the control group. However, there was no significant difference in surgical changes and the postsurgical stability between the two groups. No significant correlations existed between the amount of maxillary expansion and postsurgical mandibular movement. Conclusions: MARPE is useful for stable and nonsurgical expansion of the maxilla in adult patients with skeletal Class III malocclusion who are scheduled for bimaxillary surgery.

• The korean journal of orthodontics
• /
• v.47 no.3
• /
• pp.151-157
• /
• 2017

Objective: The objective of this study was to investigate the differences in masticatory efficiency among patients with different Angle's classes of malocclusion and to assess the correlation between masticatory efficiency and the occlusal contact area. Methods: The mixing ability index (MAI) was calculated for measuring masticatory efficiency of 61 adult patients according to Angle's classifications of malocclusion. The study included 25, 15, and 21 patients with Angle's Class I, II, and III malocclusions, respectively. Silicone interocclusal recording material was used to measure the occlusal contact area. Results: Both the MAI and occlusal contact area showed the highest average values in the Class I malocclusion group, followed by the Class II and Class III malocclusion groups. No significant difference was observed in the MAI values between the Class I and Class II malocclusion groups (p > 0.05), whereas a significant difference was observed between the Class I and Class III malocclusion groups (p < 0.01) and between the Class II and Class III malocclusion groups (p < 0.05). A weak positive correlation was also observed between the MAI and occlusal contact area (p < 0.01, $r^2=0.13$). Conclusions: The results of this study indicated that masticatory efficiency was the highest in patients with Angle's Class I malocclusion, followed by those with Angle's Class II and Angle's Class III malocclusions. Moreover, a weak positive correlation was observed between masticatory efficiency and the occlusal contact area.

• Journal of the Korean Association of Oral and Maxillofacial Surgeons
• /
• v.32 no.6
• /
• pp.559-565
• /
• 2006

The aim of this study was to evaluate the amount and interrelationship of the soft and hard tissue changes after simultaneous maxillary clockwise rotation and mandibular setback surgery in skeletal class III malocclusion. The sample comprised of 16 adult patients who had anteroposterior skeletal discrepancy. These patients had received presurgical orthodontic treatment and surgical treatment which consisted of Le fort I Osteotomy and bilateral saggital split ramus osteotomy. The presurgical (T1) and postsurgical (T2) lateral cephalograms were evaluated. The computerized statistical analysis was carried out with SPSS/PC program. The results demonstrated a decrease in the vertical dimension in the soft and hard tissue. The nasolabial angle was increased and the mentolabial angle was decreased. The results showed also many statistically significant correlations(p<0.05). The lower lip closely followed the skeletal movement of the B- point in the horizontal plane. The double jaw rotation surgery can afford a good solution to solve the problems of class III malocclusion cases.

• The korean journal of orthodontics
• /
• v.53 no.2
• /
• pp.67-76
• /
• 2023

Objective: Morphometric and morphological evaluation of the mandibular condyle in adults and to identify its correlation with skeletal malocclusion patterns. Methods: Cone-beam computed tomography scans of 135 adult patients were used in this study and classified into groups according to four criteria: (1) sex (male and female); (2) sagittal skeletal discrepancy (Class I, Class II, and Class III); (3) vertical skeletal discrepancy (hyperdivergent, normodivergent, and hypodivergent); and age (group 1 ≤ 20 years, 21 ≤ group 2 < 30, and group 3 ≥ 30 years). The morphometrical variables were mandibular condyle height and width, and the morphological variable was the mandibular condyle shape in coronal and sagittal sections. Three-dimensional standard tessellation language files were created using itk-snap (open-source software), and measurements were performed using Meshmixer (open-source software). Results: The mandibular condyle height was significantly greater (p < 0.05) in patients with class III malocclusion than in those with class I or II malocclusion; the mandibular condyle width was not significantly different among different sexes, age groups, and sagittal and vertical malocclusions. There were no statistical associations between various mandibular condyle shapes and the sexes, age groups, and skeletal malocclusions. Conclusions: The condylar height was greatest in patients with class III malocclusion. The condylar height and width were greater among males than in females. The mandibular condyle shapes observed in sagittal and coronal sections did not affect the skeletal malocclusion patterns.

• The korean journal of orthodontics
• /
• v.48 no.1
• /
• pp.63-70
• /
• 2018

Objective: The aim of this study is to quantitatively evaluate the stability of the skeletal and dental widths using cone-beam computed tomography (CBCT) after segmental Le Fort I osteotomy in adult patients with skeletal Class III malocclusion requiring maxillary expansion. Methods: In total, 25 and 36 patients with skeletal Class III malocclusion underwent Le Fort I osteotomy (control group) and segmental Le Fort I osteotomy (experimental group), respectively. Coronal CBCT images were used to measure the dental and skeletal widths before (T1) and after (T2) surgery and at the end of treatment (T3). The correlation between the extent of surgery and the amount of relapse in the experimental group was also determined. Results: In the control group, the dental width exhibited a significant decrease of $0.70{\pm}1.28mm$ between T3 and T2. In the experimental group, dental and skeletal expansion of $1.83{\pm}1.66$ and $2.55{\pm}1.94mm$, respectively, was observed between T2 and T1. The mean changes in the dental and skeletal widths between T3 and T2 were $-1.41{\pm}1.98$ and $-0.67{\pm}0.72mm$, respectively. There was a weak correlation between the amount of skeletal expansion during segmental Le Fort I osteotomy and the amount of postoperative skeletal relapse in the experimental group. Conclusions: Maxillary expansion via segmental Le Fort I osteotomy showed good stability, with a skeletal relapse rate of 26.3% over approximately 12 months. Our results suggest that a greater amount of expansion requires greater efforts for the prevention of relapse.

• The korean journal of orthodontics
• /
• v.38 no.1
• /
• pp.60-67
• /
• 2008

Treatment of adult patients with Class III malocclusion frequently requires a combined orthodontic and surgical approach. However, if for various reasons, nonsurgical orthodontic treatment is chosen, a stable outcome requires careful consideration of the patient's biologic limitation. This case presents the orthodontic treatment of an adult with a Class III malocclusion, which was treated nonsurgically using indirect skeletal anchorage.

• The korean journal of orthodontics
• /
• v.52 no.2
• /
• pp.85-101
• /
• 2022

Objective: To classify facial asymmetry (FA) phenotypes in adult patients with skeletal Class III (C-III) malocclusion. Methods: A total of 120 C-III patients who underwent orthognathic surgery (OGS) and whose three-dimensional computed tomography images were taken one month prior to OGS were evaluated. Thirty hard tissue landmarks were identified. After measurement of 22 variables, including cant (°, mm), shift (mm), and yaw (°) of the maxilla, maxillary dentition (Max-dent), mandibular dentition, mandible, and mandibular border (Man-border) and differences in the frontal ramus angle (FRA, °) and ramus height (RH, mm), K-means cluster analysis was conducted using three variables (cant in the Max-dent [mm] and shift [mm] and yaw [°] in the Manborder). Statistical analyses were conducted to characterize the differences in the FA variables among the clusters. Results: The FA phenotypes were classified into five types: 1) non-asymmetry type (35.8%); 2) maxillary-cant type (14.2%; severe cant of the Max-dent, mild shift of the Man-border); 3) mandibular-shift and yaw type (16.7%; moderate shift and yaw of the Man-border, mild RH-difference); 4) complex type (9.2%; severe cant of the Max-dent, moderate cant, severe shift, and severe yaw of the Man-border, moderate differences in FRA and RH); and 5) maxillary reverse-cant type (24.2%; reverse-cant of the Max-dent). Strategic decompensation by pre-surgical orthodontic treatment and considerations for OGS planning were proposed according to the FA phenotypes. Conclusions: This FA phenotype classification may be an effective tool for differential diagnosis and surgical planning for Class III patients with FA.