• 제목/요약/키워드: adsorptive

검색결과 240건 처리시간 0.023초

Regeneration of Exhausted Activated Carbon by a Countercurrent Oxygen Reaction

  • 류건상;김태동;김유항
    • Bulletin of the Korean Chemical Society
    • /
    • 제20권12호
    • /
    • pp.1447-1450
    • /
    • 1999
  • Countercurrent oxygen reaction (COR) was developed and evaluated for regeneration of exhausted activated carbon. Whether the regeneration technique is feasible or not is affected strongly by gradual loss and physical changes of activated carbon, energy consumption, and effective removal of adsorbed materials during the process. Various parameters such as reaction temperature, the loss of activated carbon, surface area, pore volume, surface structure, adsorptive property, etc. were examined to determine the effectiveness of COR. The results of these tests showed that the parameters were strongly dependent on oxidant flow rate, and suggest that the newly developed COR is comparable and, in some ways, possibly superior to conventional regeneration techniques because the overall process runs in a single step and is less energy intensive, and also because the adsorptive capacity of exhausted activated carbon was completely recovered.

추출제로 카프르산을 사용한 아연(II)의 흡착 기포 분리 (Adsorptive Bubble Separation of Zinc (II) Using Capric Acid as Collector)

  • Chung Hee Kwak;Chul Lee
    • Nuclear Engineering and Technology
    • /
    • 제15권2호
    • /
    • pp.149-153
    • /
    • 1983
  • 흡착 기포 분리에 의하여 수용액으로부터 아연(II)을 회수하는 방법에 관하여 연구하였다. 그리고 흡착 기포 분리에서 용매부선 과정과 거품 분별 과정에 채용되었고 이들 분리 과정에서 카프르산을 아연의 회수 물질로 사용하였다. 이온 강도 및 수소이온의 농도가 분리 과정의 효율에 어떤 영향을 미치는지를 기술하였으며, 추출제로 벤젠에 녹은 카프르산을 이용한 용매 추출과정과도 상호 비교하였다.

  • PDF

국산카올린의 흡착성에 관한 연구(I) 국산카올린의 물성 (Studies on the Adsorptive Properties of Korean Kaolin(I) Physico-chemical Properties of Korean Kaolin)

  • 이계주;정필조
    • 약학회지
    • /
    • 제29권2호
    • /
    • pp.96-102
    • /
    • 1985
  • Innovated utilization of Korean kaolins as pharmaceuticals is attempted, for which relevant properties including adsorptive behaviours are observed in connection with their mineralogical structures. In practice, physico-chemical properties are assessed by means of IR, XRD and thermal analysis including DTA, TG and DSC. Elemental analysis of the ore specimens under investigation is carried out in conventional manners. It is found that the chemical compositions are varied significantly with sampling sites and primary classifications. The clay ores thus analyzed are mainly composed of halloysite species. Proper benefication of the raw clays is necessary so that authentic requirements for medicinal use may be satisfied. White-colored premium grade halloysite could be utilized as therapeutics with relative ease after purification. Evidence indicates that gibbsite-like impurities are intercalated between the 1 : 1 layered moieties. Thermal behaviours may be characterized in such a fashion that loss of free water occurs near 100.deg. C and further heatings result in liberation of bound water near 500.deg. C, with subsequent transformation into amorphous metastable entities. Through thermal activation, enhanced pharmaceutical effects could be envisaged.

  • PDF

Highly efficient adsorptive removal of uranyl ions from aqueous solutions using dicalcium phosphate nanoparticles as a superabsorbent

  • Saghatchi, Hadis;Ansari, Reza;Mousavi, H. Zavvar
    • Nuclear Engineering and Technology
    • /
    • 제50권7호
    • /
    • pp.1112-1119
    • /
    • 2018
  • Dicalcium phosphate nanoparticles (DCP-NPs) was synthesized chemically and used for adsorptive removal of uranyl ions from aqueous solutions in a batch system. A commercial grade of DCP (monetite) was also employed for comparison. The synthesized and commercial adsorbents (S-DCP and C-DCP) were characterized by FT-IR, SEM and XRD techniques. The investigation of adsorption isotherms indicated that the maximum adsorption capacities ($q_m$) for C-DCP and S-DCP were 714.3 and $666.7mg\;g^{-1}$ (at 293 K), respectively. The experimental kinetics were well-described by the pseudo-second-order kinetic and the equilibrium data were fitted with both Langmuir and Freundlich adsorption models. Thermodynamic studies indicated that the adsorption of uranyl ions on the monetite surface was a spontaneous exothermic process. The exhausted adsorbents could be regenerated by washing with $0.10mol\;L^{-1}$ NaOH.

여러 흡착제를 이용한 총질소와 총인 흡착특성에 관한 비교연구 (A Comparative Study on Adsorption Characteristics of Total Nitrogen and Phosphorous in Water Using Various Adsorbents)

  • 유건상;최종하
    • 대한화학회지
    • /
    • 제56권6호
    • /
    • pp.700-705
    • /
    • 2012
  • 본 연구는 수중에 있는 질소와 인의 흡착 제거를 위해서 활성탄뿐 아니라 황토와 비산재의 이용 가능성을 탐구하는 것이다. 여기서 우리는 각 흡착제에 대한 흡착효율과 Freundlich 상수 k와 1/n 값을 조사하였다. 비산재는 수중에 있는 총질소와 총인에 대하여 전혀 흡착능력을 보이지 않았다. 황토에 의한 수중으로부터의 총질소의 흡착은 일어나지 않았다. 그러나 24시간의 반응시간과 실온에서 총인에 대하여 대략 57.5%의 흡착효율을 보였다. 활성탄은 총질소에 대해서 매우 효과적인 흡착제라는 것을 보여 주었다. 활성탄의 Freundlich 상수 1/n 값을 통해서 활성탄이 황토와 거의 동등한 흡착능력을 가지고 있다는 것을 알게 되었다.

Adsorptive removal of atmospheric pollutants over Pyropia tenera chars

  • Lee, Heejin;Park, Rae-su;Lee, Hyung Won;Hong, Yeojin;Lee, Yejin;Park, Sung Hoon;Jung, Sang-Chul;Yoo, Kyung-Seun;Jeon, Jong-Ki;Park, Young-Kwon
    • Carbon letters
    • /
    • 제19권
    • /
    • pp.79-88
    • /
    • 2016
  • As a replacement for activated carbon, biochar was synthesized and used for the adsorptive removal of formaldehyde and nitrogen oxide. Biochar was produced from the fast pyrolysis of the red marine macro alga, Pyropia tenera. The P. tenera char was then activated with steam, ammonia and KOH to alter its characteristics. The adsorption of formaldehyde, which is one of the main indoor air pollutants, onto the seaweed char was performed using 1-ppm formaldehyde and the char was activated using a range of methods. The char activated with both the KOH and ammonia treatments showed the highest adsorptive removal efficiency, followed by KOH-treated char, ammonia-treated char, steam-treated char, and non-activated char. The removal of 1000-ppm NO over untreated char, KOH-treated char, and activated carbon was also tested. While the untreated char exhibited little activity, the KOH-treated char removed 80% of the NO at 50℃, which was an even higher NO removal efficiency than that achieved by activated carbon.

CuS 침전의 기포흡착분리에 관한 연구 (Bubble Adsorptive Separation of CuS Precipitates)

  • 신정호;박경기;정갑섭;이근희
    • 공업화학
    • /
    • 제9권1호
    • /
    • pp.20-27
    • /
    • 1998
  • CTAB에 의한 CuS 침전 미립자의 응집과 기포 흡착특성을 고찰하였다. CTAB의 기포흡착은 Langmuir흡착식을 따르며, 포말간 본체액의 동반을 고려한 회분해석으로부터 구한 흡착열은 3700cal/mol로 나타났다. CTAB에 의한 CuS미립자의 기포흡착은 기포-입자간 충돌흡착으로 설명되었고, 흡착분리에 대한 최적 농도비는 CuS의 최적 응집농도비와 일치하였으며, 그 값은 [CTAB] 대 [CuS]가 0.1로 얻어졌다. 기포에 의한 포집효율은 pH와 CTAB농도 등에 의존하나 공기의 유량에는 무관하였으며, 최대 포집효율은 최적 첨가농도에서 0.0002로 나타났다. 또한 Cu-Cd-Zn 황화물의 혼합계에서 CTAB를 사용한 기포흡착의 경우 ZnS의 선택적 분리가 가능하였다.

  • PDF

반도체급 삼염화실란중의 극미량 붕소의 분광 광도법적 측정 (Spectrophotometric Determination of Traces of Boron in Semiconductor-grade Trichlorosilane)

  • 김동권;김희영
    • 대한화학회지
    • /
    • 제35권5호
    • /
    • pp.534-538
    • /
    • 1991
  • 흡착 분리 방법을 이용하여 고순도 삼염화실란(TCS) 중의 미량 붕소 농도를 분광광도법적으로 측정하는 방법을 제안하였다. TCS중의 붕소 화합물과 복합체를 잘 형성하고 황산-quinalizarin계 발색 시약에 잘 녹으며 측정시 간섭 효과를 나타내지 않는 Lewis 염기성 물질로 NaCl이 선택되었다. 이러한 흡착 분리 방법을 통해 TCS분석 도중에 실리카겔 및 기포가 생성되는 문제를 방지할 수 있었는데, 반도체급 TCS중의 붕소 농도는 ${\pm}$20%의 표준편차 범위내에서 6.1 ${\mu}$g/l로 측정되었다. 반면 NaCl로 붕소화합물을 제거시킨 정제된 TCS 중의 붕소 농도는 0.2 ${\mu}$g/l이어서 NaCl의 우수한 흡착 성능을 확인할 수 있었다. 또한 NaCl이 TCS 정제 중 붕소 제거에 효과적임을 다른 잘 알려진 흡착제들과 비교 분석하였다.

  • PDF

1-(2-Pyridylazo)-2-naphthol을 이용한 우라늄의 흡착벗김전압전류법적 정량 (Determination of Uranium using 1-(2-Pyridylazo)-2-naphthol by Adsorptive Stripping Voltammetry)

  • 김경태;최원형;이진식;최성용
    • 분석과학
    • /
    • 제8권3호
    • /
    • pp.285-292
    • /
    • 1995
  • 우라늄은 여러 가지 산화상태(${UO_2}^{+2}$, $UO^{+2}$, $U^{+3}$, $U^{+4}$)를 가지며 1-(2-Pyridylazo)-2-naphthol은 ${UO_2}^{+2}$과 매우 안정한 킬레이트를 형성한다. 0.1M borate 완충용액 (PH 7.10)에서 흡착벗김전압전류법으로 우라늄(${UO_2}^{+2}$)의 정량방법을 조사하였다. 분석의 최적 조건은 PAN의 농도 $5{\times}10^{-7}M$, 흡착전위 0.0V(vs. Ag/AgCl), 흡착시간 120초였다. 검정곡선은 $5{\sim}60{\mu}g/L$까지 양호한 직선성을 보여 주었다. 이 방범은 Cu(II)와 Co(II)를 제외한 다른 금속이온의 방해는 없었다.

  • PDF