• Journal of the Society of Cosmetic Scientists of Korea
• /
• v.36 no.1
• /
• pp.1-16
• /
• 2010

The preparation and properties of emulsions stabilized by the adsorption of solid particles at the oil-water interface are reviewed. Comparison is made with the behaviour of surfactant-stabilized emulsions. Many of the properties of Pickering emulsions are attributed to the large free energy of adsorption for particles. The main differences is due to the irreversible adsorption of particles to the interface. Phase inversion from w/o (water-in-oil) to o/w (oil-in-water) can be brought by increasing the volume fraction of water. Hydrophilic particles tend to form o/w emulsion whereas hydrophobic particles form w/o emulsion. The contact angle at the oil-water interface is main parameter to decide the emulsion type. The aspects of stability of Pickering emulsions are in contrast to general emulsions in some points. The possibility using Pickering emulsions for cosmetics is also proposed.

• Composites Research
• /
• v.36 no.6
• /
• pp.402-407
• /
• 2023

Activated carbon fibers (ACFs) are fibrous form of activated carbon (AC) with higher mechanical strength and flexibility, which make them suitable for building modules for applications including directional gas flow such as air and gas purification. Similarly, ACFs are anticipated to excel in the efficient capture of CO₂. However, due to the difficulties in fabricating monofilament carbon fibers at a laboratory scale, most of the studies regarding ACFs for CO₂ capture have relied on electrospun carbon fibers. In this study, we fabricated monofilament carbon fibers from PAN-based monofilament precursors by stabilization and carbonization. Then, ACFs were successfully prepared by chemical activation using KOH. Different weight ratios ranging from 1:1 to 1:4 were employed in the fabrication of ACFs, and the samples were designated as ACF-1 to ACF-4, respectively. As a function of KOH ratio, increase in surface area could be observed. However, the CO₂ adsorption trend did not follow the surface area trend, and the ACF-3 with second largest surface area exhibited the highest CO₂ adsorption capacity. To understand the phenomena, nitrogen content and ultramicropore distribution, which are important factors determining CO₂ adsorption capacity, were considered. As a result, while nitrogen content could not explain the phenomena, ultramicropore distribution could provide a reasoning that the excessive etching led ACF-4 to develop micropore structure with a broader distribution, resulting in high surface area yet deteriorated CO₂ adsorption.

• Economic and Environmental Geology
• /
• v.43 no.1
• /
• pp.13-20
• /
• 2010

Acid mine drainage (AMD) from abandoned mine sites typically has low pH and contains high level of various heavy metals, aggravating ground- and surface water qualities and neighboring environments. This study investigated removal of heavy metals in a biological treatment system, mainly focusing on the removal by adsorption on a substrate material. Bench-scale batch experiments were performed with a mushroom compost to evaluate the adsorption characteristics of heavy metals leached out from a mine tailing sample and the role of SRB in the overall removal process. In addition, adsorption experiments were perform using an artificial AMD sample containing $Cd^{2+}$, $Cu^{2+}$, $Pb^{2+}$ and $Zn^{2+}$ to assess adsorption capacity of the mushroom compost. The results indicated Mn leached out from mine tailing was not subject to microbial stabilization or adsorption onto mushroom compost while microbially mediated stabilization played an important role in the removal of Zn. Fe leaching significantly increased in the presence of microbes as compared to autoclaved samples, and this was attributed to dissolution of Fe minerals in the mine tailing in a response to the depletion of $Fe^{3+}$ by iron reduction bacteria. Measurement of oxidation reduction potential (ORP) and pH indicated the reactive mixture maintained reducing condition and moderate pH during the reaction. The results of the adsorption experiments involving artificial AMD sample indicated adsorption removal efficiency was greater than 90% at pH 6 condition, but it decreased at pH 3 condition.

• Journal of Soil and Groundwater Environment
• /
• v.18 no.7
• /
• pp.63-72
• /
• 2013

This study estimated stabilization efficiency of As and heavy metal contaminated agricultural soil in abandoned mine through pot experiment. Also contaminants uptake of plant (lettuce) was compared as function of amendment (limestone, steelmaking slag and the mixture of these) addition. In soil solution analysis, concentration of contaminants in soil solutions which added limestone or steelmaking slag were lower than that of the mixture. Especially in As analysis, concentration with 5% (wt) addition of steelmaking slag showed the lowest value among those with other amendments. This seems that As stabilization happens through Fe adsorption during precipitation of Fe by pH increasing. Leachability of As in stabilized soil by TCLP was represented similar result with soil solution analysis. However leachability of heavy metals in stabilized soil was similar with that of non-stabilized soil due to dissolution of alkali precipitant by weak acid. Contaminants uptake rate by plant was also lower when limestone or steelmaking slag was used. However this study revealed that concentration of contaminants in soil solution didn't affect to the uptake rate of plant directly. Because lower $R^2$ (coefficient of determination) was represented in linear regression analysis between soil solution and plant.

• Journal of Soil and Groundwater Environment
• /
• v.27 no.4
• /
• pp.49-62
• /
• 2022

The magnesium and iron-based layered double hydroxide (Mg-Fe LDH) was synthesized by the co-precipitation process and the bead type LDH (BLDH, 5~6 mm in diameter) was manufactured by using the Mg-Fe LDH and the starch as a binder. To evaluate the feasibility of the BLDH as the As stabilizer in the soil, various experiments were performed and the As stabilization efficiency of the BLDH was compared to that of powdered type LDH (PLDH, <149 ㎛ in diameter). For the As sorption batch experiment, the As sorption efficiency of both of the PLDH and the BLDH showed higher than 99%. For the stabilization experiment with soil, the As extraction reducing efficiency of the PLDH was higher than 87%, and for the BLDH, it was higher than 80%, suggesting that the BLDH has similar the feasibility of As stabilization for the contaminated soil, compared to the PLDH. From the continuous column experiments, when more than 7% BLDH was added into the soil, the As stabilization efficiency of the column maintained at over 91% for 7 pore volume flushing (simulating about 21 months of rainfall) and slowly decreased down to 64% after that time (to 36 months) under the non-equilibrium conditions. Results suggested that more than 7% of BLDH added in As-contaminated soil could be enough to stabilize As in soil for a long time. The main As fixation mechanisms on the LDH were also identified through the X-ray fluorescence (XRF), the X-ray diffraction (XRD), and the Fourier transform infrared (FT-IR) analyses. Results showed that the LDH has enough of an external surface adsorption capacity and an anion exchange capability at the interlayer spaces. Results of SEM/EDS and BET analyses also supported that the Mg-Fe LDH used in this study has sufficient porous structures and outer surfaces to fix the As. The reduction of carbonate (CO₃^2-) and sulfate (SO₄^2-) anions in the LDH after the reaction between As and the LDH was observed through the FT-IR, the XRF, and the XRD analyses, suggesting that the exchange of some of these anions with the arsenate (H₂AsO₄^- or HAsO₄^2-) occurs at the LDH interlayers during the stabilization process in soil.

• Elastomers and Composites
• /
• v.52 no.4
• /
• pp.257-265
• /
• 2017

In this work, CR (Chloroprene Rubber) was emulsified by phase-inversion emulsification with nonionic surfactants (NP-1025, LE-1017, and OP-1019) and an anionic surfactant (SDBS; sodium dodecylbenzenesulfonate), and its stabilization was investigated through a study of its adsorption characteristics, zeta potential, and flow behavior. As the amount of the mixed surfactant increased, the droplet size decreased, resulting in the increase of viscosity. In particular, a CR emulsion with a lower absorbance in the UV spectrum exhibited the highest zeta potential. The results of this experiment showed that the CR emulsion prepared using (LE-1017) and SDBS was the most stable. In this study, calcium hydroxide and aluminum hydroxide were added to enhance the mechanical properties of the CR emulsion, and the relationship between tensile strength, tear strength and surface free energy were investigated. The tensile and tear strengths of the CR emulsion incresed as the amount of calcium hydroxide and aluminum hydroxide increased. The highest tensile and tear strengths and surface free energy were observed for additions of 1.0% calcium hydroxide and 0.80% aluminum hydroxide, respectively. It was concluded that the interfacial bonding strength was improved by the even dispersion of calcium hydroxide and aluminum hydroxide in the CR emulsion.

• Journal of Soil and Groundwater Environment
• /
• v.27 no.4
• /
• pp.10-21
• /
• 2022

In the South Korea, 47% of abandoned mines are suffering from the mining hazards such as the mine drainage (MD), the mine tailings and the waste rocks. Among them the mine drainage which has a low pH and the high concentration of heavy metals can directly contaminate rivers or soil and cause serious damages to human health. The natural/artificial treatment facilities by using neutralizers and coagulants for the mine drainage have been operated in domestic and most of heavy metals in mind drainage are precipitated and removed in the form of metal hydroxide, alumino-silicate or carbonate, generating a large amount of mine drainage treated sludge ('MDS' hereafter) by-product. The MDS has a large surface area and many functional groups, showing high efficiency on the fixation of heavy metals. The purpose of this study is to develop a ingenious heavy metal stabilizer that can effectively stabilize arsenic (As) and heavy metals in soil by recycling the MDS (two types of MDS: the acid mine drainage treated sludge (MMDS) and the coal mine drainage treated sludge (CMDS)). Various analyses, toxicity evaluations, and leaching reduction batch experiments were performed to identify the characteristics of MDS as the stabilizer for soils contaminated with As and heavy metals. As a result of batch experiments, the Pb stabilization efficiency of both of MDSs for soil A was higher than 90% and their Zn stabilization efficiencies were higher than 70%. In the case of soil B and C, which were contaminated with As, their As stabilization efficiencies were higher than 80%. Experimental results suggested that both of MDSs could be successfully applied for the As and heavy metal contaminated soil as the soil stabilizer, because of their low unit price and high stabilization efficiency for As and hevry metals.

• Economic and Environmental Geology
• /
• v.42 no.5
• /
• pp.435-444
• /
• 2009

In situ stabilization of heavy metals through adsorption onto indigenous bacterial biofilm developed on soil particles was investigated. Biofilms were developed in soil columns by supply of various carbon sources such as acetate, lactate and glucose. During development of biofilms, acetate, lactate, and glucose solutions were flew out from the soil columns with volume ratios of 98.5%, 97.3%, and 94.7%, respectively, when compared with soil column supplied with deionized water. Decrease in effluent amounts through the soil columns amended with carbon sources over time indicated the formation of biofilms resulting in decrease of soil porosity. Solutions of Cd, Cr(VI), Cu, Pb, and Zn were injected into the biofilms supported on soil particles in the columns, and the dissolved heavy metals in effluents were determined. Concentrations of dissolved Cd, Cr(VI), Cu, and Zn in the effluents through biofilm columns were lower than those of control column supplied with deionized water. The result was likely due to enhanced adsorption of the metals onto biofilms. Efficiency of metal removal by biofilms depended on the type of carbon sources supplied. The enhanced removal of dissolved heavy metals by bacterial biofilms in this study may be effectively applied to technical development of in situ stabilization of heavy metals in natural soil formation contaminated with heavy metals.

• Journal of the Mineralogical Society of Korea
• /
• v.17 no.4
• /
• pp.299-307
• /
• 2004

Surfactant adsorption by two montmorillonite types with different interlayer cations of Ca and Na was characterized by examining the time dependence of surfactant behavior on the clay surfaces. Surfactants with different micelle concentration were conducted in our experiment to observe a nonequilibrium activity of cationic surfactant on the clay over reaction periods ranging from 0.1 min to 11 days. As compared with Ca-montmorillonite (SAz), a more active intrusion of surfactant molecules into the interlayers was found in Na-montmorillonite (SWy). During a short 'initiation' stage, the basal spacing of SWy montmorillonite increased rapidly with logarithmic time. For SAz montmorillonite, however, the abrupt basal spacing increase occurred at the later stage of the reaction. From the result, the difference in the adsorption behavior exhibited by the two montmorillonite types partly results from their intrinsic nature, that is, inorganic cations originally existing on the clay surfaces. Additionally, the micelle concentration of surfactants affects the development of organo-montmorillonite, especially, in the intercalant formation and stabilization under nonequilibrium.

• Journal of Microbiology and Biotechnology
• /
• v.9 no.1
• /
• pp.32-38
• /
• 1999

A biosurfactant produced by Tsukamurella sp. 26A was purified by procedures including acid precipitation, ethylacetate extraction, and adsorption chromatography. The purified biosurfactant reduced the surface tension of water from 72 mN/m to 30 mN/m at a concentration of 250 mg/l, whereas the minimum interfacial tension against n-hexadecane was lowered to 1.5 mN/m at a concentration of 40 mg/i. The compound stabilized oil-in-water emulsions with a variety of commercial oils and had strong emulsification and stabilization activities when compared to those of commercial emulsifiers and stabilizers. Surface tension was stable over a broad range of pH (2-12) and temperature ($100^{\circ}C$, 3h). The biosurfactant was identified as glycolipid having a hydrophilic moiety of trehalose.