• Korean Journal of Materials Research
• /
• v.31 no.6
• /
• pp.345-352
• /
• 2021

In this study, Ni nanoparticle supported by graphene oxide (GO) (Ni-GO) is successfully synthesized through hydrothermal synthesis and calcination, and Cr(VI) is extracted from aqueous solution. The morphology and structure of Ni-GO composites are characterized by scanning electron microscopy (SEM), trans mission electron microscopy (TEM), X-ray diffraction (XRD) and X-ray photoelectron spectroscopy (XPS). High-resolution transmission electron microscopy (HRTEM) and XRD confirms the high dispersion of Ni nanoparticle after support by GO. Loading Ni on GO can obviously enhance the stability of Ni-GO composites. It can be calculated from TGA that the mass percentage of Ni is about 60.67 %. The effects of initial pH and reaction time on Cr(VI) removal ability of Ni-GO are investigated. The results indicate that the removal efficiency of Cr(VI) is greater than that of bared GO. Ni-GO shows fast removal capacity for Cr(VI) (<25 min) with high removal efficiency. Dynamic experiments show that the removal process conforms to the quasi-second order model of adsorption, which indicates that the rate control step of the removal process is chemical adsorption. The removal capacity increases with the increase of temperature, indicating that the reaction of Cr(VI) on Ni-GO composites is endothermic and spontaneous. Combined with tests and characterization, the mechanism of Cr(VI) removal by rapidly adsorption on the surface of Ni-GO and reduction by Ni nanoparticle is investigated. The above results show that Ni-GO can be used as a potential remediation agent for Cr(VI)-contaminated groundwater.

• Membrane and Water Treatment
• /
• v.15 no.2
• /
• pp.51-57
• /
• 2024

The removal of phosphorus, especially phosphate-form phosphorus, is necessary in wastewater treatment. Biofouling induced by the quorum sensing mechanism is also a major problem in membrane bioreactor (MBR), which reduces membrane flux. This study introduces lanthanum-doped quorum quenching (QQ) beads into MBR, confirming their inhibitory effect on biofouling due to Rhodococcus sp. BH4 and their capacity for phosphorus removal through lanthanum adsorption. A batch test was conducted to access the phosphate adsorption of lanthanum-QQ (La-QQ) beads and lab-scale MBR to verify the effect of inhibition. The study aimed to identify distinctions among the MBR, QQ MBR, and La-QQ MBR. In the batch test, the phosphate removal rate increased as the volume of beads increased, while the unit volume removal rate of phosphate decreased. In the lab-scale MBR, the phosphate removal rates were below 20% in the control MBR and QQ MBR, whereas the La-QQ MBR achieved a phosphate removal rate of 74%. There was not much difference between the ammonia and total organic carbon (TOC) removal rates. Regarding the change in transmembrane pressure(TMP), 3.7 days were taken for the control MBR to reach critical pressure. In contrast, the QQ-MBR took 9.8 days, and the La-QQ MBR took 6.1 days, which confirms the delay in biofouling. It is expected that La-QQ can be used within MBR to design a more stable MBR process that regulates biofouling and enhances phosphate removal.

• Journal of environmental and Sanitary engineering
• /
• v.10 no.2
• /
• pp.1-12
• /
• 1995

Under accelerated industrial developments environment pollution comes out to be very stirious. Especially the ions of heavy metal from wastewater, even if they are minimal, accumulated in ecology circle and do finally injury to human health. The general process for removal of heavy metals include coagulation and following sedimentation, ion -exchange and active carbon adsorption and sedimentation that applicate in popular, needs the expense of coagulant the additional treatment of sludge on the general process of coagulation and sedimentation. It is also a serious problem that the second pollution caused by coagulant. However chelating adsorption that uses natural chelating high- molecular compound has not pollution problem Among chelating high- molecules, the diminishing chitin that contained in crustaceans as crawfish and crab in our country with affluent water resources are easy to get. So it is advantageous to use this ubiquitous material for removing heavy metals because we could reuse natural resource. In this research, the author tested the effectiveness of the adsorption and removal of heavy metal ions by chitin and its derivatives. Chitin and cellulose became beads and used as flocculant, in this test. The results are as follows . First, bead showed higher removal ratio than powder in the comparative test on adsorbents such as chitin, chitosan and cellulose. Secondly, in the variety test by the kinds of adsorbent and time. chitosan bead and cellulose bead that showed the highest removal ratio. One hour need to remove the ions of heavy metal. Thirdly, the results of the adsorption degree test by pH revealed high removal ratio adsorption of chitin, cellulose and chitosan bead in alkalin condition but chitosan bead in acidic condition.

• Journal of Environmental Science International
• /
• v.8 no.2
• /
• pp.227-231
• /
• 1999

This study was conducted to investigate the removal characteristics of $PO_4^{3-}-P$ contained in livestock wastewater using waste concrete. With small particle size, increased dosage and temperature of water, $PO_4^{3-}-P$ was well removed by waste concrete.$PO_4^{3-}-P$ was removed by adsorption reaction in low pH of the primary phase, but the crystallization reaction predominated for increasing pH with passed time. As a result of adapting the adsorption isotherm equation, $PO_4^{3-}-P$ removal was more affected by the crystallization reaction than the adsorption reaction. In the SEM micrograph, there was no evident change on the waste concreter surface. Particle size was plate-phase before reaction but appeared a dense form to progress in the crystallization reaction.

• Journal of the Korean Society of Safety
• /
• v.19 no.3 s.67
• /
• pp.40-44
• /
• 2004

To the removal of hardness materials, we've test the absorptive capacity of main material $Mg^{2+},\;Ca^{2+}$ on the using the activated carbon powder saturated in 0.1M Nitrilotriacetic acid by experimental methods. The absorptive properties of $Ca^{2+}\;and\;Mg^{2+}$ were measured with absorbent quantity and contact time., and investigated the physical properties of overall rate constant and adsorption constant adsorption isotherm, and Langmuir and Freundlich constant. In case of k' adsorption rate constants of $Ca^{2+},\;Mg^{2+}$, was 0.00299, 0.00529 by Bhattahary and Venkobachar equation. $k_{aa}$ was 0.00373, 0.00640 according with adsorption rate constants of Lagergren.

• Korean Chemical Engineering Research
• /
• v.53 no.5
• /
• pp.576-583
• /
• 2015

This paper aims to investigate the potential use of cempedak durian peel (CDP) from Negara Brunei Darussalam, which is low-cost, locally available, eco-friendly and highly efficient to remove methyl violet (MV) dye from aqueous solutions. The time required for equilibrium to be reached is 2.0 h with no adjustment of pH necessary. FTIR analysis was indicative of the involvement of -COOH and C=O functional groups in adsorption process. The Langmuir model provided the best fit with maximum adsorption capacity of $0.606mmol\;g^{-1}$. Thermodynamics data indicate that the adsorption is spontaneous, feasible and endothermic in nature. Best regeneration of CDP's adsorption ability is achieved by base solution, showing about 95% removal efficiency of MV even after 5 cycles, indicating that CDP can be regenerated and reused. This, together with its high adsorption capacity, makes CDP a potential adsorbent for the removal of MV in wastewater.

• Applied Chemistry for Engineering
• /
• v.18 no.5
• /
• pp.459-466
• /
• 2007

In this study, H-type beta zeolites (BEA) having various metals were used as the adsorbent for the removal of sulfur containing odorants. The different adsorbents containing single or bimetals were utilized to investigate the performance in the individual adsorption of TBM and THT odorants or in the competitive adsorption between them by using a continuous adsorptive bed system. The result shows that the pure H-type BEA zeolite exhibited the highest adsorption capacity for TBM compound, but the higher amount of THT was removed and adsorbed on a HBEA adsorbent having Fe, Pd metal and ZnO oxide. In the case of bimetal containing adsorbents, Cu-Zn/HBEA and Fe-Mo/HBEA showed a higher adsorption capacity for TBM.

• Environmental Engineering Research
• /
• v.24 no.4
• /
• pp.600-607
• /
• 2019

Volatile organic compounds (VOCs) are released from various sources and are unsafe for human health. Porous materials are promising candidates for the adsorption of VOCs owing to their increased ratio of surface area to volume. In this study, activated carbon (AC) impregnated cellulose acetate (CA) electrospun mats were synthesized using electrospinning for the removal of VOCs from the air mixture of ACs, and CA solution was electrospun at different proportions (5%, 10%, and 15%) in a single nozzle system. The different AC amounts in the electrospun mats were distributed within the AC fibers. The adsorption capacities were measured for acetone, benzene, and dichloromethane, using quartz crystal microbalance. The results elicited an increasing adsorption capacity trend as a function of the impregnation of ACs in the electrospun mats, while their capacities increased as a function of the AC concentration. Dichloromethane resulted in a faster adsorption process than acetone and benzene owing to its smaller molecular size. VOCs were desorbed with the N₂ gas purging, while VOCs were adsorbed at higher temperatures owing to the increased vapor pressures. The adsorption analysis using Dubinin-Astakhov equation showed that dichloromethane is more strongly adsorbed on mats.

• Advances in environmental research
• /
• v.3 no.3
• /
• pp.217-230
• /
• 2014

The large quantity of green cull bananas has the potential of being used industrially and, thereby, to improve banana economics and eliminate the large environmental problem presented by banana waste. Wastewaters from textile, cosmetics, printing, dying, food colouring, and paper-making industries are polluted by dyes. The adsorption of basic dye by waste banana pith was investigated by varying dye concentrations, adsorbent dose, particle size and agitation rate. The adsorption capacity was found to be maximum value of removal by using 0.1 g of sorbent with particle size 1mm at mixing speed 200 rpm for initial concentration 25 mg/l to reach value of approximate 89%. The Langmuir, Temkin and Freundlich adsorption models were used for mathematical description of the adsorption equilibrium and it was found that experimental data fitted very well to these models except Langmuir model. Adsorption of dye was applied on (pseudo-first and pseudo-second-order kinetics), and the experimental data was more fitted to pseudo second order. The results of this study showed that banana pith could be employed as effective and low-cost materials for the removal of dyes from aqueous solutions.

• Journal of Korean Society on Water Environment
• /
• v.27 no.4
• /
• pp.486-490
• /
• 2011

As(V) adsorption on aluminum oxide powder which was recycled from industrial wastes containing aluminum hydroxide was evaluated. Aluminum oxide powder in this study was prepared by calcinating aluminum hydroxide wastes at$550^{\circ}C$. Spectroscopic analysis indicated that the aluminum hydroxide wastes were changed to aluminum oxide by calcination. Arsenic adsorption isotherm was conducted with variation of ionic strength and multiple-ion systems using Ca(II) and Cu(II). As(V) removal showed typical anionic adsorption characteristics that the removal efficiency decreased with increasing pH in single As(V) system as well as in binary and ternary system. More than 80% of As(V) at an initial concentration of $5{\times}10^{-5}$ M was removed from aluminum oxide powder in As(V) single system. The effect of ionic strength on As(V) adsorption was negligible, which indicated the strong bonding between aluminum oxide powder and As(V). The removal efficiency of As(V) was higher in a binary system with Cu(II) than in a binary system with Ca(II).