• Applied Biological Chemistry
• /
• 제38권5호
• /
• pp.452-454
• /
• 1995

게 껍질과 갑오징어 널에서 조제한 키틴과 키토산을 흡착제로 사용하여 염색공장에서 폐기되는 폐색소를 정화하기 위한 실험을 수행하였다. 이중 키토산이 키틴 보다 효율적인 흡착제로 작용하였으며, 키토산을 채운 컬럼 실험에서 1kg의 키토산은 0.05%의 색소를 함유한 염색 폐수 120L를 75% 효율로 흡착제거하였다. 이는 1kg의 키토산이 45g의 색소를 흡착하였다는 것을 의미한다.

• Environmental Engineering Research
• /
• 제18권4호
• /
• pp.267-276
• /
• 2013

This study presents a comparison of different protocols for the synthesis of iron-loaded zeolites, and the results of their application, as well as that of zeolite-A (Z-A), to the removal of ammonium and phosphate from aqueous media. Zeolites prepared by three methods were evaluated: iron-incorporated zeolites (IIZ), iron-exchanged zeolites (IEZ), and iron-calcined zeolites (ICZ). The optimal iron content for preparing of IIZ, as determined via scanning electron microscopy and X-ray photoelectron spectroscopy analyses, expressed as molar ratio of $SiO_2:Al_2O_3:Fe$, was below 0.05. Ammonia removal revealed that the iron-loaded zeolites have a higher removal capacity than that of Z-A due, not only to ion-exchange phenomena, but also via adsorption. Greater phosphate removal was achieved with IEZ than with ICZ; additionally, no sludge production was observed in this heterogeneous reaction, even though the coagulation process is generally accompanied by the production of a large amount of undesired chemical sludge. This study demonstrates that the developed synthetic iron-loaded zeolites can be applied as a heterogeneous nutrient-removal materials with no sludge production.

• KSBB Journal
• /
• 제8권4호
• /
• pp.336-340
• /
• 1993

생물고분자 생산을 위하여 오니에서 slime을 생산하는 Zoogloea ramigera 115를 선택하였다. 추출한 생물고분자는 카드뮴, 아연 같은 금속에 대해서 높은 흡착성능을 나타냈다. 특히 발효조 broth는 높은 흡착성능을 나타냄으로써 부가적인 분리공정없이 생물흡착제로서 사용 가능할 것이다. 생물고분자는 calcium alginate bead 형태로 고정화되어 유가금속 회수를 위하여 충전층 반응기에 사용되었다. 생물흡착제는 구리, 카드뮴, 망간, 아연에 대하여 80% 또는 그이상의 높은 제거율을 나타냈으며 흡착-탈착-재흡착 실험에서 높은 안정성을 나타냈다. 고정화된 생물고분자 시스템은 이온교환수지와 같은 다른 중금속 제거 시스템과 경쟁력 및 잠재적인 산업상 응용 가능성을 보였다.

• Bulletin of the Korean Chemical Society
• /
• 제30권1호
• /
• pp.172-176
• /
• 2009

The nature and morphology of titanium dioxide films play a significant role in determining the overall efficiency of dye-sensitized solar cell (DSSCs). In this work, the preparation of nanostructured titania particles by sol-gel method (SG-$TiO_2$) and its characterization were investigated for the application of DSSCs. The samples were characterized by XRD, XPS, FE-SEM, BET and FT-IR analysis. The energy conversion efficiency of SG-$TiO_2$ was approximately 8.3 % under illumination with AM 1.5 (100 mW/$cm^2$) simulated sunlight. DSSCs made of SG-$TiO_2$ nanocrystalline films as photoanodes achieved better energy conversion efficiency compared to those prepared using commercially available Degussa P25.

• KIEE International Transactions on Electrophysics and Applications
• /
• 제5C권3호
• /
• pp.115-118
• /
• 2005

Currently, molecular devices are reported utilizing active self-assembled monolayers (SAMs) containing the nitro group as the active component, which has active redox centers [1]. SAMs are ordered molecular structures formed by the adsorption of an active surfactant on a solid surface. The molecules will be spontaneously oriented toward the substrate surface and form an energetically favorable ordered layer. During this process, the surface-active head group of the molecule chemically reacts with and chemisorbs onto the substrate In this paper, the electrical properties of the 4'4- di(ethynylphenyl)-2'-nitro-1-benzenethiolate was confirmed. This material is well known as a conducting molecule having possible application to molecular level negative differential resistance (NDR) device. To deposit the self-assembly monolayers onto the gold electrode, the prefabricated Au(1 l l) substrates were immersed into 0.5[mM/l] self-assembly molecule in THF solution. Then, the electrical properties and surface morphologies of 4' 4-di(ethynylphenyl)-2' -nitro-1-benzenethiolate were measured by using the ultra-high vacuum scanning tunneling microscopy (UHV-STM).

• 한국산학기술학회:학술대회논문집
• /
• 한국산학기술학회 2000년도 추계학술대회
• /
• pp.55-60
• /
• 2000

The adsorption isotherms can be assigned to typical Type I for Ag and Cu-treated ACFs and Type I and Type II for Ni-treated ACFs. From the DSC analysis, A $g_{0.9}$-ACF occurs only exothermic curve at the temperature of $203^{\circ}C$, and relatively stable composition curves were formed. But C $u_{0.3}$-ACF and C $u_{0.4}$-ACF occur endothermic curves at the temperature of 57.26, 107.02 and $215.87^{\circ}C$. N $i_{1.0}$-ACF occurs large endothermic curves at 59.26, 98.40 and $208.89^{\circ}C$ and N $i_{0.8}$-ACF are shown endothermic curves at 59.26 and $157.77^{\circ}C$. From the biological results, the percentages of the antibacterial effects were 96.5-100 for Ag-ACFs, 92.3-99.8 for Cu-ACFs and 95.5-100 for Ni-ACFs, respectivelylyvelylyly

• EDISON SW 활용 경진대회 논문집
• /
• 제5회(2016년)
• /
• pp.147-154
• /
• 2016

Co-nonsolvency is a puzzling phenomenon that a polymer swells in a good solvent individually, but it collapses in a mixture of good solvents. This structural transition with changing solvent environment has been drawing attention due to practical application for stimuli-responsive polymer. The aim of this work is to describe the physical origin of the co-nonsolvency. In this work, we present Monte Carlo simulations for polymer solutions by using simple and general model. We simulate linear and ring polymers to compare their co-nonsolvency behaviors. Calculating Flory exponents and bridging fractions gives a good description for polymer structures. While the polymer structure shows non-monotonous behavior with increasing the cosolvent fraction, the chemical potential decreases monotonously. This indicates that coil-to-globule transition of polymers is purely controlled by free energy and can be regarded as a thermodynamics transition. We also present that ring polymers have higher looping probability than linear polymers, thus the bridging fraction remains higher at high cosolvent fraction. Our study provides a new perspective to understand polymer structure when the polymer "dissolves well" in any solvent.

• 한국수소및신에너지학회논문집
• /
• 제32권6호
• /
• pp.656-662
• /
• 2021

For the high efficiencies of quantum dot-sensitized solar cells (QDSCs), it is important to control the severe electron recombination at the interface of photoanode/electrolyte. In this work, we optimize the surface passivation process of ZnS/SiO₂ double overlayers for the enhanced photovoltaic performances of QDSCs. The overlayers of zinc sulfide (ZnS) and SiO₂ are coated on the surface of QD-sensitized photoanode by successive ionic layer adsorption and reaction (SILAR) method, and sol-gel reaction, respectively. In particular, for the sol-gel reaction of SiO₂, the influences of temperature of precursor solution are investigated. By application of SiO₂ overlayers on the ZnS-coated photoanode, the conversion efficiency of QDSCs is increased from 5.04% to 7.35%. The impedance analysis reveals that the electron recombination at the interface of photoanode/electrolyte is obviously reduced by the SiO₂ overlayers.

• Composites Research
• /
• 제34권6호
• /
• pp.345-349
• /
• 2021

The continued environmental pollution caused by fossil fuel consumption has prompted researchers around the world to develop environmentally friendly energy technologies. Electrochemical energy storage is the significant area of research in this development process, and the research significance of supercapacitors in this field is increasing. Herein, a simple electrodeposition synthetic route was explored to develop the MoP layered cathode material. The layered structure provided a highly ion-accessible surface for smooth and faster ion adsorption/desorption. After Fe was doped into MoP, the morphology of MoP changes and the electrochemical performance was significantly improved. Specific capacitance value of the binder-free FeMoP electrode was found to be 269 F g^-1 at 2 A g^-1 current density in 6 M aqueous KOH electrolyte. After adding Fe to MoP, an additional redox contribution was observed in the redox conversion from Fe³⁺ to Fe²⁺ redox pair, and the charge transfer kinetics of MoP was effectively improved. This research can provide guidance for the development of supercapacitor electrode materials through simple electrodeposition technology.

• 한국지하수토양환경학회지:지하수토양환경
• /
• 제27권4호
• /
• pp.22-36
• /
• 2022

Cadmium is a class 1 carcinogen classified by the International Agency for Research on Cancer (IARC) and has a high potential for leaching into groundwater. Therefore, it is necessary to address cadmium contamination by employing adequate treatment methodologies. Although various methods have been suggested to reduce cadmium in groundwater, their applications often suffer from various limitation arising from heterogeneous field conditions and technical difficulties. In this work, several in-situ technologies to treat cadmium contaminated groundwater were reviewed and discussed by separately addressing physicochemical, chemical and biological methods. In particular, the optimum cadmium remediation strategies that involve physical removal of source area → physicochemical and chemical remediation → biological remediation were proposed by considering reduction efficiency, adsorption rate, economic feasibility and ease of field application in groundwater.