• 한국환경과학회지
• /
• 제17권1호
• /
• pp.67-75
• /
• 2008

Adsorption process is largely influenced by pore structures of adsorbents and physical properties of adsorbates and adsorbents. The previous studies of this laboratory was focused on the role of pore structures of adsorbents. And we found some pores of adsorbates which have larger pore diameters than the diameter of adsorbate are filled with easily. In this study the effects of physical and chemical properties of adsorbates and adsorbents, such as pore size distribution, vapor pressure on adsorption were investigated more thoroughly at the concentration of adsorbate of 1000 ppm. The adsorption in the pore ranges of $2{\sim}4$ times of adsorbates's diameter could be explained by space filling concept. But there was some condensation phenomena at larger pore ranges. The errors between the adsorbed amount of non-polar adsorbates and the calculated amounts by considering factors were found to be 44.46%, positively, and -142%, negatively. When vapor pressure is considered, the errors between the adsorbed amount of non-polar adsorbates and the calculated amounts were in the range of $1.69%{\sim}32.25%$ positively, and negatively $-1.08%{\sim}-63.10%$.

• Bulletin of the Korean Chemical Society
• /
• 제10권3호
• /
• pp.254-258
• /
• 1989

Adsorption of 1,3-propanedithiol, 1,4-butanedithiol, 1,5-pentanedithiol, and 1,6-hexanedithiol on silver surface has been investigated by surface-enhanced Raman spectroscopy. It has been found that the conformations of the adsorbates were mainly affected by steric interaction of the adsorbates with the surface. As the alkyl chain length separating the thiol groups increased, surface stacking efficiency became increasingly important in determining conformation of the adsorbate on the surface.

• 한국자기공명학회논문지
• /
• 제3권2호
• /
• pp.109-126
• /
• 1999

The location of Cu(II) exchanged into measoporous aluminosilicate MCM-41(AlMCM-41) material and its interaction with various adsorbate molecules were investigated by electron spin resonance and electron spin echo modulation spectroscopies. Cu(II) is fully coordinated to adsorbates in a wide open mesopore of AlMCM-41 for the formation of favorable complexes. It was found that in the fresh hydrated material, Cu(II) is octahedrally coordinated to six water molecules as evidenced by an isotropic room temperature ESR signal. This species is located in a cylindrical MCM-41 channel and rotates rapidly at room temperature. Evacuation at room temperature removes some of these water molecules, leaving the Cu(II) coordinated to less water molecules and anchored to oxygens in an MCM-41 channel wall. Dehydration at 450$^{\circ}C$ produces one Cu(II) species located on the internal wall of a channel, which is easily accessible to adsorbates. Adsorption of adsorbate molecules such as water, methanol, ammonia, pyridine, aniline, acetonitrile, benzene, and ethylene on a dehydrated Cu-AlMCM-41 material causes changes in the ESR spectrum of Cu(II), indicating the complex formation with these adsorbates. Cu(II) forms a complex with six molecules of methanol as evidenced by an isotropic room temperature ESR signal and ESEM analysis like upon water adsorption. Cu(II) also forms a square planar complex containing four molecules of N-containing adsorbates such as ammonia, pyridine and aniline based on resolved nitrogen superhyperfine interaction and their ESR parameters. However, Cu(II) forms a complex with six-molecules of acetonitrile based on ESR parameters. Only one molecule of benzene or ethylene is coordinated to Cu(II).

• 청정기술
• /
• 제7권2호
• /
• pp.141-149
• /
• 2001

본 연구는 활성탄이 충진된 고정 흡착층에서 흡착특성에 영향을 줄 수 있는 다양한 변수들, 흡착온도, 흐름속도, 흡착질의 종류와 농도, 형상비(L/D)에 따른 영향이 조사되었다. 고정층내의 파과시간은 흡착온도, 흐름속도와 흡착질의 농도가 증가함에 따라 감소하였다. 또한 고정 흡착층의 파과곡선으로부터 얻어지는 물질전달영역(mass transfer zone)과 미사용길이(length of unused bed)는 흡착가스 유속, 흡착가스의 농도 및 흡착온도에 영향을 많이 받는 반면 고정 흡착층의 형상비에 대한 영향은 상대적으로 작았으며, 이 중에서 흡착가스의 농도에 대한 영향이 가장 큰 것으로 나타났다. 단일성분에 대한 흡착평형실험 데이터를 가장 잘 예측할 수 있는 모델식을 구하기 위해 Langmuir, Freundlich 및 Langmuir-Freundlich 모델식을 적용하여 실험결과와 비교해 보았을 때 세가지 이론식 모두 benzene과 toluene의 흡착평형을 잘 표현하는 것을 알 수 있었다.

• 분석과학
• /
• 제18권4호
• /
• pp.309-319
• /
• 2005

본 연구는 흡착제와 기체상 분자의 흡착특성을 연구하기 위하여 탄소질 흡착제의 세공크기 및 흡착 온도와 압력에 따른 기체상 분자들의 흡착용량을 Crand Canonical Monte Carlo(GCMC) 분자모사 방법으로 예측하였다. 사용된 흡착질에 대한 분자구조 및 분자 분광학적 성질에 대해서는 범밀도함수이론(DFT)을 이용하여 계산하였다. 온도에 따른 흡착효과는 온도가 증가할수록 흡착량은 감소하는 경향을 보였으며, 흡착질의 크기, 극성, 그리고 흡착질간의 상호작용 등에 따라서도 흡착효과는 일정한 상관관계를 나타내는 것으로 예측되었다. 본 연구에 사용된 모든 경우에 대하여 탄소질 흡착제에 흡착되는 순서는 $NH_3$ < $H_2S$ < $CH_3SH$ 순으로 예측되었으며, 이러한 이론적 예측은 실험에 의한 관찰 결과와 정성적으로 잘 일치하는 것으로 나타났다.

• 한국환경과학회지
• /
• 제16권3호
• /
• pp.377-383
• /
• 2007

In this study, the relationship between the pore size distribution and the adsorption amount of adsorbates is investigated in detail. Adsorption amounts of non-polar adsorbates were greater than those of polar adsorbates because of slight negative charge on surfaces of adsorbents. The adsorption of benzene on the surface of absorbents was largely influenced by the specific pore size of $2{\sim}4$ times of benzene diameter. But in case of toluene, the adsorption of toluene was affected by pore sizes of $2{\sim}4$ times as well as $4{\sim}6$ times of the diameter of toluene. Both acetone and MEK were examined by the same method. The adsorption of acetone was influenced by pore sizes of $2{\sim}4$ times of the diameter of acetone. But acetone does not look to be built up multi-layer on those pore sizes. Since acetone molecule is small and its mobility is so fast, it is assumed that the adsorption and desorption of acetone is simultaneously occurred at the same time even at room temperature. In case of MEK, MEK was effected by pore sizes of $2{\sim}4$ times of the diameter of MEK.

• Transactions on Electrical and Electronic Materials
• /
• 제16권5호
• /
• pp.285-289
• /
• 2015

We prepared silver Schottky contacts to O-polar and nonpolar m-plane bulk ZnO wafers. Then, by considering various transport models, we performed a comparative analysis of the current transport properties of Ag/bulk ZnO Schottky diodes, which were measured at 300, 200, and 100 K. The fitting of the forward bias current-voltage (I-V) characteristics revealed that the tunneling current is dominant as the transport component in both the samples. Compared to thermionic emission (TE), a stronger contribution of tunneling current was observed at low temperature. The reverse bias I-V characteristics were well fitted with the thermionic field emission (TFE) in both the samples. The presence of acceptor-like adsorbates, such as O₂ and H₂O, modulated the surface conductive state of ZnO, thereby affecting the tunneling effect. The degree of activation/passivation of acceptor-like adsorbates might be different in both the samples owing to their different surface morphologies and surface defects (e.g., oxygen vacancies).

• Bulletin of the Korean Chemical Society
• /
• 제21권7호
• /
• pp.705-708
• /
• 2000

Adsorption of CO and NO Moleculcs on a Pt(OO1)-hex R0.7° surface at 90 K is investigated by scanning tunneling microscopy (STM) in ultra-high vacuum environments. At an initial stage of adsorption, both molecules are preferentially adsorbed on th e Iess coordinated Pt atoms of the surface with hexagonal structure, which act as active sites. Domains of the adsorbates grow parallel to the stripe structure of the reconstructed surface because of Iower migration energy in this direction. The extra Pt atoms produced from adsorbate-induced restructuring give rise to anisotropic islands on the ( 1 x 1 ) surface. Each of the adsorbed NO molecules at low coveragcs is atomicalIy resolved during STM observation. However, the spots of the adsorbed CO are invisible.Such a behavior is probably explained in terms of different interactions between the adsorbates.

• 대한화학회지
• /
• 제33권4호
• /
• pp.350-356
• /
• 1989

타르, 니코틴 등 몇 가지 연초 에어로솔 성분의 흡착거동을 해석한 결과 비교적 저비점 피흡착질의 흡착률은 축적 동공부피의 증가와 더불어 증가하였다. 반면 비교적 고비점 피흡착질의 흡착률은 보다 작은 반경의 동공부피가 증가할수록 감소하였다. 여기에 사용된 흡착제는 활성탄, 실리카겔, 알루미나 및 활성백토이었다. 비표면적이 큰 흡착제가 보다 큰 흡착률을 가진다는 일반적인 경향은 고비점 피흡착질에 대해서는 성립되지 않았다. 이상의 결과는 위의 흡착거동을 탈착등온식을 기초로 하여 동공부피분포와 관련시켜 검토하므로써 얻어진 것이다.

• 한국진공학회:학술대회논문집
• /
• 한국진공학회 1996년도 제10회 학술발표회 논문개요집
• /
• pp.124-124
• /
• 1996