DOI QR코드

DOI QR Code

Adsorption Affected by Relationship Between Pore Sizes of Activated Carbons and Physical Properties of Adsorbates

활성탄의 세공크기와 흡착질의 물리적 특성과의 연관성이 흡착에 미치는 영향

  • Kang, Jeong-Hwa (Department of Chemical Engineering, Pusan National University) ;
  • Kwon, Jun-Ho (Department of Chemical Engineering, Pusan National University) ;
  • Kim, Sang-Won (Department of Chemical Engineering, Pusan National University) ;
  • Song, Seung-Koo (Department of Chemical Engineering, Pusan National University)
  • 강정화 (부산대학교 응용화학공학부) ;
  • 권준호 (부산대학교 응용화학공학부) ;
  • 김상원 (부산대학교 응용화학공학부) ;
  • 송승구 (부산대학교 응용화학공학부)
  • Published : 2007.03.28

Abstract

In this study, the relationship between the pore size distribution and the adsorption amount of adsorbates is investigated in detail. Adsorption amounts of non-polar adsorbates were greater than those of polar adsorbates because of slight negative charge on surfaces of adsorbents. The adsorption of benzene on the surface of absorbents was largely influenced by the specific pore size of $2{\sim}4$ times of benzene diameter. But in case of toluene, the adsorption of toluene was affected by pore sizes of $2{\sim}4$ times as well as $4{\sim}6$ times of the diameter of toluene. Both acetone and MEK were examined by the same method. The adsorption of acetone was influenced by pore sizes of $2{\sim}4$ times of the diameter of acetone. But acetone does not look to be built up multi-layer on those pore sizes. Since acetone molecule is small and its mobility is so fast, it is assumed that the adsorption and desorption of acetone is simultaneously occurred at the same time even at room temperature. In case of MEK, MEK was effected by pore sizes of $2{\sim}4$ times of the diameter of MEK.

Keywords

References

  1. Ruthven, D. M., 1984, Principles of adsorption and adsorption process, Wiley, New York, 10pp
  2. Lee S. W., Bae, S. K., Kwon, J. H., Na, Y. S., An, C. D., Yoon, Y. S., Song, S. K., 2005, Adsorption characteristics of toluene vapor according to pore structures of zeolite 5A modified with hydrochloric acid, J. KSEE, 27(8), 807-812
  3. Lee S. W., Bae, S. K, Kwon, J. H., Na, Y. S., An, C. D., Yoon, Y. S., Song, S. K, 2006, Adsorption characteristics of toluene vapor according to pore size distribution of activated carbon. J. Env. Sci., 15(7), 695-699 https://doi.org/10.5322/JES.2006.15.7.695
  4. Kwon J. H., 2006, Adsorption and desorption characteristics of VOCs on activated carbon according to pore areas, 석사학위 논문, 화학공학과, 부산대학교, 부산
  5. Lee S. W., Bae, S. K., Kwon, J. H., Na, Y. S., An, C. D., Yoon, Y. S., Song, S. K., 2005, Correlations between pore structure of activated carbon and adsorption characteristics of acetone vapor, J. KSEE, 27(6), 620-625
  6. Barret, E. P., Joyner, L. S., Halenda, P. P., 1951, The determination of pore volume and area distributions in porous substances, I. computation from nitrogen isotherm, J. Am. Chem. Soc., 73, 373-380 https://doi.org/10.1021/ja01145a126
  7. Micromeritics, 1997, ASAP 2010 Manual, Appendix C, 13pp
  8. Ustinov, E. A., Do, D. D., 2002, Adsorption in slit-like pores of activated Carbons: improvement of the horvath and kawazoe method, Langmuir, 18, 4637-4647 https://doi.org/10.1021/la010535l