• 한국소음진동공학회논문집
• /
• 제14권4호
• /
• pp.336-343
• /
• 2004

This paper reports the first known free vibration data for thin rectangular plates with V-notches. The classical Ritz method is employed with two sets of admissible functions assumed for the transverse vibratory displacements. These sets include (1) mathematically complete algebraic-trigonometric polynomials which guarantee convergence to exact frequencies as sufficient terms are retained, and (2) corner functions which account for the bending moment singularities at the sharp reentrant corner of the Y-notch. Extensive convergence studies summarized herein confirm that the corner functions substantially enhance the convergence and accuracy of nondirectional frequencies for rectangular plates having the V-notch. In this paper, accurate frequencies and normalized contours of vibratory transverse displacement are presented for various notched plates, so that the effect of corner stress singularities may be understood.

• Structural Engineering and Mechanics
• /
• 제44권3호
• /
• pp.267-288
• /
• 2012

Free vibration analysis of arbitrary quadrilateral thick plates with internal columns and elastic edge supports is presented by using the powerful pb-2 Ritz method and Reddy's third order shear deformation plate theory. The computing domain of arbitrary quadrilateral planform is mapped onto a standard square form by coordinate transformation. The versatile pb-2 Ritz functions defined by the product of a two-dimensional polynomial and a basic function are taken to be the admissible functions. Substituting these displacement functions into the energy functional and minimizing the total energy by differentiation, leads to a typical eigenvalue problem, which is solved by a standard eigenvalue solver. Stiffness and mass matrices are numerically integrated over the plate by using Gaussian quadrature. The accuracy and efficiency of the proposed method are demonstrated through several numerical examples by comparison and convergency studies. A lot of numerical results for reasonable natural frequency parameters of quadrilateral plates with different combinations of elastic boundary conditions and column supports at any locations are presented, which can be used as a benchmark for future studies in this area.

• Kyungpook Mathematical Journal
• /
• 제57권2호
• /
• pp.233-244
• /
• 2017

Differential subordination and superordination results associated with a generalized Hurwitz-Lerch Zeta function in the open unit disk are obtained by investigating appropriate classes of admissible functions. In particular some inequalities for generalized Hurwitz-Lerch Zeta function are obtained.

• 한국소음진동공학회:학술대회논문집
• /
• 한국소음진동공학회 1993년도 춘계학술대회논문집; 한국과학연구소, 21 May 1993
• /
• pp.107-112
• /
• 1993

The effect of the applied direction and magnitude of loads on the stability and natural frequency of flexible rotors is analyzed, when the rotors are subject to nonconservative torque and force. The stability criterion derived from the energy and variational principle is discussed and a general Galerkin's method which utilizes admissible functions is employed for numerical analysis. Illustrative examples are treated to demonstrate the analytical developments.

• Nonlinear Functional Analysis and Applications
• /
• 제29권3호
• /
• pp.885-897
• /
• 2024

The purpose of this paper is to introduce a class of distance altering functions that establish the existence and uniqueness of fixed points of 𝜈-admissible mappings that are subject to a generalized (𝜓, 𝜑)-almost weakly contraction on a generalized b₂-metric space.

• 대한기계학회논문집
• /
• 제16권8호
• /
• pp.1485-1492
• /
• 1992

본 연구에서는 Rayleigh-Ritz method를 사용하여 타원형(원형 포함) 평판의 자유 진동 문제를 해석한다. admissible함수로서는 단순 다항식의 곱(products of simple polynomials)을 사용한다. 이 함수는 다항식의 첫 항의 차수를 0,1 또는 2로 함으로써 각각 자유, 단순 지지 또는 고정인 경계 조건을 간편히 처리할 수 있게 하며, 에너지식에 포함된 적분값을 계산함에 있어서 점화식을 유도하여 사용함으로써 계산을 매우 간편히 수행할 수 있게 한다. 본문의 이론 해석은 직교 이방성 타원형 평판에 대해서 제시된다. 그러나 수치 결과는, 이방성의 다양한 조합에 대한 많은 결과를 제시하는 것은 그다지 의미가 없는 관계로, 등방성 평판에 대해서 주어진다. 등방성 평판의 여러 가지 세장비에 대한 결과는 설계 데이터로써 활용될 수 있을 것이다. 덧붙여 대표적으로 세장비가 0.5인 평판에 대해서 nodal pattern이 그림으로 제시된다.

• Structural Engineering and Mechanics
• /
• 제35권4호
• /
• pp.387-407
• /
• 2010

In this paper, using perturbation and Galerkin method, the response of a resonant viscoelastic microbeam to an electric actuation is obtained. The microbeam is under axial load and electrical load. It is assumed that midplane is stretched, when the beam is deflected. The equation of motion is derived using the Newton's second law. The viscoelastic model is taken to be the Kelvin-Voigt model. In the first section, the static deflection is obtained using the Galerkin method. Exact linear symmetric mode shape of a straight beam and its deflection function under constant transverse load are used as admissible functions. So, an analytical expression that describes the static deflection at all points is obtained. Comparing the result with previous research show that using deflection function as admissible function decreases the computation errors and previous calculations volume. In the second section, the response of a microbeam resonator system under primary and secondary resonance excitation has been obtained by analytical multiple scale perturbation method combined with the Galerkin method. It is shown, that a small amount of viscoelastic damping has an important effect and causes to decrease the maximum amplitude of response, and to shift the resonance frequency. Also, it shown, that an increase of the DC voltage, ratio of the air gap to the microbeam thickness, tensile axial load, would increase the effect of viscoelastic damping, and an increase of the compressive axial load would decrease the effect of viscoelastic damping.

• 한국전산구조공학회:학술대회논문집
• /
• 한국전산구조공학회 1989년도 봄 학술발표회 논문집
• /
• pp.33-37
• /
• 1989

According to the Rayleigh-Ritz approximation method, a solution can be represented as a finite series consisting of space-dependent functions, which satisfy all the geometric boundary conditions of the problem and appropriate smoothness requirement in the interior of the domain. In this paper, an efficient formulation for solving structural dynamics systems in frequency domain is presented. A general procedure called Ritz modes (or vectors) generation algorithm is used to generate the admissible functions, i.e. Ritz modes, Then, the use of direct superposition of the Ritz modes is utilized to reduce the size of the problem in spatial dimension via geometric coordinates projection. For the reduced system, the frequency domain approach is applied. Finally, a numerical example is presented to illustrate the effectiveness of the proposed method.

• Nuclear Engineering and Technology
• /
• 제31권2호
• /
• pp.214-225
• /
• 1999

An accurate method is presented for flexural vibrations of sectorial plates having simply supported-free and free-free radial edges, when the circular edge is either clamped or simply supported. The classical Ritz method is employed with two sets of admissible functions assumed for the transverse vibratory displacements. These sets consist of : (1) mathematically complete algebraic-trigonometric polynomials which gurantee convergence to exact frequencies as sufficient terms are retained, and (2) comer functions which account for the bending moment singularities at re-entrant comer of the radial edges having arbitrary edge conditions. Accurate (at least four significant figures) frequencies and normalized contours of the transverse vibratory displacement are presented for the spectra of corner angles [90$^{\circ}$, 180$^{\circ}$(semi-circular), 270$^{\circ}$, 300$^{\circ}$, 330$^{\circ}$, 350$^{\circ}$, 355$^{\circ}$, 360$^{\circ}$ (complete circular)] causing a re-entrant comer of the radial edges. Future solutions drawn from alternative numerical procedures and finite element techniques may be compared with these accurate results.

• 소음진동
• /
• 제5권3호
• /
• pp.345-352
• /
• 1995

A very simple and computationally efficient numerical method is developed for the free vibration of arbitrary shape plates. A set of two- dimensional simple series functions is used as an admissible displacement functions in the Rayleigh-Ritz method to obtain the natural frequencies for the arbitrary shape plates. From the prescribed starting function satisfying only the geometric boundary conditions, the higher terms in the series function are constructed with adding order of polynomial. Natural frequencies are obtained for the arbitrary shape plates, with combinational boundary conditions. The obtained numerical results are presented, some cases are verified with other numerical methods in the literature.