• Journal of Power Electronics
• /
• v.16 no.1
• /
• pp.111-120
• /
• 2016

Generally, a single phase H-bridge converter feeding a single primary track is employed in conventional inductive power transfer systems. However, these systems may not be suitable for some high power applications due to the constraints of the semiconductor switches and the cost. To resolve this problem, a novel dual coupled primary tracks IPT system consisting of two high frequency resonant inverters feeding the tracks is presented in this paper. The primary tracks are wound around an E-shape ferrite core in parallel which enhances the magnetic flux around the tracks. The mutual inductance of the coupled tracks is utilized to achieve adjustable power sharing between the inverters by configuring the additional resonant capacitors. The total transfer power can be continuously regulated by altering the pulse width of the inverters' output voltage with the phase shift control approach. In addition, the system's efficiency and the control strategy are provided to analyze the characteristic of the proposed IPT system. An experimental setup with total power of 1.4kW is employed to verify the proposed system under power ratios of 1:1 and 1:2 with a transfer efficiency up to 88.7%. The results verify the performance of the proposed system.

• Proceedings of the KIPE Conference
• /
• 2000.07a
• /
• pp.521-524
• /
• 2000

The switched reluctance motor(SRM) drive system provides a good adjustable speed characteristics. However higher torque ripple are one of the few disadvantages of the SRM drives. The SRM would have to operated with an MMF waveform specified for switching angle and phase voltage. This paper proposes control modelling method using ANN(Artificial Neural Network) and GA(Genetic Algorithm) that are used to control switch-on angles and input voltage.

• Proceedings of the KIPE Conference
• /
• 2002.07a
• /
• pp.427-430
• /
• 2002

The switched reluctance motor (SRM) drive system provides a good adjustable speed characteristics. But driving of SRM is nonlinear changed according to rotor position angle and phase current because of saturation in magnetic circuit, and it is difficult to drive the high efficiency. This paper proposes find point of high efficiency in variable load that are used to control switch-on/off angles and input voltage.

• Proceedings of the KIPE Conference
• /
• 2003.07b
• /
• pp.856-859
• /
• 2003

The switched reluctance motor(SRM) drive system provides a good adjustable speed and torque characteristics. However, because of the torque production mechanism, it also has some disadvantage such as higher torque ripple and fluctuation in speed. To reduce torque ripple and to control speed precisely, digital signal processor(BSP) is adopted. The DSP TMS320F241 was used to be realized this drive system. Test results show that the suggested control system has the ability of dynamic and precise speed control.

• Korean Journal of Optics and Photonics
• /
• v.25 no.3
• /
• pp.146-149
• /
• 2014

The homogeneous line broadening in EDF leads to unstable lasing and strong mode competition. In this paper a multiwavelength fiber ring laser that overcomes these effects by using variable attenuators between the DWDM and $1{\times}N$ coupler, has been proposed. Fiber ring lasers with four and eight wavelength outputs are implemented, and we show that the output powers can be adjusted with stable operation. The EDF ring laser has one four-wavelength output and four of single wavelengths, with OSNR of 50 and 60 dB respectively.

• Proceedings of the KIEE Conference
• /
• 1997.07a
• /
• pp.44-46
• /
• 1997

The intrinsic simplicity, ruggedness, and simple power electronic drive requirement of a switched reluctance motor (SRM) make it a viable use for many commercial adjustable speed applications. However, higher torque ripple is one of the few disadvantages of the SRM drives. This paper describes the robust control scheme that permits the phase torque flatted by adaptive reference model.

• Proceedings of the KIPE Conference
• /
• 2016.11a
• /
• pp.71-72
• /
• 2016

전동기의 운전 영역을 확대하기 위해 부스트 컨버터를 이용하여 가변 DC link를 합성한다. 가변 DC link 구간에서는 스위칭 손실이 증가하기 때문에 스위칭 횟수를 줄이는 전략이 필요하다. 제안하는 Edge-Cutting Pulse Width Modulation(ECPWM)을 통해 스위칭 손실을 1/3로 절감하고, 최적의 고조파 특성을 갖는 직류단 전압의 크기를 결정한다. 이를 이용해 가변 직류단 전압 구간에서 인버터 손실을 감소시키며, Bolognani 과변조 방법을 적용해 안정적인 6-스텝으로의 절환까지 고려한다.

• 전기의세계
• /
• v.18 no.4
• /
• pp.22-30
• /
• 1969

The development of the frequency convertors using semiconductors devices makes it possible to control the speed of A.C. motors easily. It is now economically feasible to provide them with power at adjustble frequency using silicon-controlled rectifier (or thyristor) inverters. In such a case, in order to operate an induction motor efficiently over a wide speed range, it must be supplied from a variable frecuency source of which frequency is adjustable over the speep range of the motor. It is desired to observe the changes in characteristics as primary current, torque-speed of induction moter etc. at any optional frequncy. Although the charactheristies can be obtained by means of the conventional methods they require very complicated precedures of calcuations. The Current Diagram Method in this paper suggests a new approach to simpler calcuations of the characteristics, using the motor constants at reference frequency. The conclusions of this study are summarized as follows: (1) The equations of stator current at adjusted frequency were derived to construct graphical chart and the current circle required for the Current Diagrm Method. (2) The radius, center of the current circle and the vector locus, the basis for calculating the characteristics, at any desired frequency could be easily determined with the aid of both the derived graphical chart and current circle at reference frequency. (3) The method was shown to be applicable to the various types of 3-phase induction motors and also dealt with its application to the split-phase, condenser motors.

• Proceedings of the Korean Institute of Electrical and Electronic Material Engineers Conference
• /
• 2005.11a
• /
• pp.157-158
• /
• 2005

Superconducting fault currents(SFCLs) are expected to improve not only reliability but also stability of real power systems. The analysis on the single line-to-ground fault of the integrated three phase flux-lock type SFCL, which consists of three flux-lock reactor wound on an iron core in each single phase and three YBCO thin films, was investigated in current limiting operation characteristics. We compared 21turn numbers with 42turn numbers according to wound turn numbers each the coil 2 under the additive polarity winding operation between coil 1 and coil 2. The three phase flux-lock type SFCL using an iron core differently operates general three phase resistive SFCLs. When a single line-to-ground fault occurred, the SFCL's three units were quenched after fault onset. We confirmed effective current limiting operation characteristics with adjustable inductance level.

• Journal of Electrical Engineering and Technology
• /
• v.7 no.4
• /
• pp.480-485
• /
• 2012

Use of photovoltaic (PV) power generation system will become more widespread in the future due to anticipated cost reduction in PV technology. As the capacity of PV systems increases, a variation of power system frequency may prevent the stable output of PV system. However, the standard for the frequency protection of distributed generation in Korea Electric Power Corporation (KEPCO)'s rule does not include the setting of frequency protection. Therefore, this paper analyzes the correlation between the frequency protection requirements and the stability of grid-connected PV system for the adjustable operating setting of frequency protection. The distribution system interconnected with 3 MW PV system is modeled by Matlab/Simulink. The various values of frequency are simulated. For studied cases, the stability of PV system is analyzed. It is concluded that the setting of frequency protection is necessary to consider the stability of PV system.