• 한국수학교육학회지시리즈E:수학교육논문집
• /
• 제22권4호
• /
• pp.545-556
• /
• 2008

삼각형은 가장 단순한 기하학적 도형이지만, 기하학 탐구에서 삼각형은 훌륭한 연구 대상이며 후속적인 기하학 연구의 중요한 도구라고 할 수 있다. 본 연구에서는 지렛대 원리를 이용하여 삼각형의 Gergonne 점과 Gergonne 점의 딸림점들의 존재성, Gergonne 점에 관련된 등식을 증명하였고, Gergonne 점의 딸림점들에 대한 새로운 등식을 증명하였다.

• 한국원자력학회:학술대회논문집
• /
• 한국원자력학회 1999년도 추계학술발표회요약집
• /
• pp.67.2-67
• /
• 1999

• International Journal of Aeronautical and Space Sciences
• /
• 제8권1호
• /
• pp.66-78
• /
• 2007

A multi-point aerodynamic shape optimization technique has been developed for helicopter rotor blades in hover based on a continuous adjoint method on unstructured meshes. The Euler flow solver and the continuous adjoint sensitivity analysis were formulated on the rotating frame of reference. The 'objective function and the sensitivity were obtained as a weighted sum of the values at each design point. The blade section contour was modified by using the Hicks-Henne shape functions. The mesh movement due to the blade geometry change was achieved by using a spring analogy. In order to handle the repeated evaluation of the design cycle efficiently, the flow and adjoint solvers were parallelized based on a domain decomposition strategy. A solution-adaptive mesh refinement technique was adopted for the accurate capturing of the wake. Applications were made to the aerodynamic shape optimization of the Caradonna-Tung rotor blades and the UH-60 rotor blades in hover.

• 한국전산유체공학회:학술대회논문집
• /
• 한국전산유체공학회 2003년도 The Fifth Asian Computational Fluid Dynamics Conference
• /
• pp.240-242
• /
• 2003

A method for performing two-dimensional lift-constraint drag minimization in inviscid compressible flows on unstructured meshes is developed. Sensitivities of objective function with respect to the design variables are efficiently obtained by using a continuous adjoint method. In addition, parallel algorithm is used in multi-point design optimization to enhance the computational efficiency. The characteristics of single-point and multi-point optimization are examined, and the comparison of these two method is presented.

• 한국항공우주학회지
• /
• 제34권7호
• /
• pp.18-27
• /
• 2006

일반적인 신뢰성 최적 설계는 결정론적 최적 설계에 비해 매우 많은 계산비용이 필요하므로 공력 형상 최적화와 같은 큰 문제에 직접 적용하기는 매우 어렵다. 본 연구에서는 이러한 한계를 극복하기 위하여 이점 근사화 기법과 adjoint 민감도 해석 기법을 결합한 효율적인 신뢰성 설계 과정을 제안한다. 이 방법은 계산비용은 결정론적 방법과 거의 동일하지만 계산 결과에 있어서는 기존의 신뢰성 설계 기법과 유사한 결과를 얻을 수 있다. 이를 이용하여 3차원 공력 형상 최적 설계를 매우 효율적으로 수행할 수 있었다.

• International Journal of Aeronautical and Space Sciences
• /
• 제18권4호
• /
• pp.601-613
• /
• 2017

An adjoint-based error estimation and mesh adaptation study is conducted for two-dimensional viscous flows on unstructured hybrid meshes. The error in an integral output functional of interest is estimated by a dot product of the residual vector and adjoint variable vector. Regions for the mesh to be adapted are selected based on the amount of local error at each nodal point. Triangular cells in the adaptive regions are refined by regular refinement, and quadrangular cells near viscous walls are bisected accordingly. The present procedure is applied to single-element airfoils such as the RAE2822 at a transonic regime and a diamond-shaped airfoil at a supersonic regime. Then the 30P30N multi-element airfoil at a low subsonic regime with a high incidence angle (${\alpha}=21deg.$) is analyzed. The same level of prediction accuracy for lift and drag is achieved with much less mesh points than the uniform mesh refinement approach. The detailed procedure of the adjoint-based mesh refinement for the multi-element airfoil case show that the basic flow features around the airfoil should be resolved so that the adjoint method can accurately estimate an output error.

• Journal of applied mathematics & informatics
• /
• 제14권1_2호
• /
• pp.237-249
• /
• 2004

Consider the second order self-adjoint neutral difference equation of form $\Delta(a_n$\mid$\Delta(x_n\;-\;{p_n}{x_{{\tau}_n}}$\mid$^{\alpha}sgn{\Delta}(x_n\;-\;{p_n}{x_{{\tau}_n}}\;+\;f(n,\;{x_{g_n}}\;=\;0$. In this paper, we will give the classification of nonoscillatory solutions of the above equation; and by the fixed point theorem, we present some existence results for some kinds of nonoscillatory solutions of the equation.

• International Journal of Aeronautical and Space Sciences
• /
• 제18권3호
• /
• pp.403-413
• /
• 2017

Dual-point aerodynamic design optimization is conducted for DLR-F6 wing-body-nacelle-pylon configuration adopting an efficient surface mesh movement method for complex junction geometries. A three-dimensional unstructured Euler solver and its discrete adjoint code are utilized for flow and sensitivity analysis, respectively. Considered design conditions are a low-lift condition and a cruise condition in a transonic regime. Design objective is to minimize drag and reduce shock strength at both flow conditions. Shape deformation is made by variation of the section shapes of inboard wing and pylon, nacelle vertical location and nacelle pitch angle. Hicks-Henne shape functions are employed for deformation of the section shapes of wing and pylon. By the design optimization, drag coefficients were remarkably reduced at both design conditions retaining specified lift coefficient and satisfying other constraints. Two-point design results show mixed features of the one-point design results at low-lift condition and cruise conditions.

• 대한전자공학회:학술대회논문집
• /
• 대한전자공학회 2002년도 ITC-CSCC -2
• /
• pp.1204-1207
• /
• 2002

The fixed points of two known gradient flows defined on adjoint orbits of orthogonal groups are analyzed through the critical point analysis of the potential functions. The results show that some known properties of these gradient flows are shared with the gradient flows of the same potential functions with respect to other metrics.

• 한국전산구조공학회논문집
• /
• 제28권4호
• /
• pp.425-431
• /
• 2015

본 논문에서는 균열 진전문제에 대하여 페리다이나믹스 이론을 이용하여 설계민감도 해석 및 구조 최적설계를 수행하였다. 페리다이나믹스는 해의 불연속성을 다루기 어려웠던 기존의 연속체 이론에 비해 균열 진전문제와 같은 불연속성을 가지는 문제를 자연스럽게 표현할 수 있다는 장점을 가지고 있다. 최적설계를 진행하기 위하여 애조인 변수법으로 설계민감도를 유도하였다. 특히 균열이 진전되더라도 애조인 변수법으로 계산된 변위장과 변형에너지에 대한 설계민감도 값은 유한차분법과 비교하여 매우 정확하고 효율적임을 보였다. 이를 바탕으로 간단한 인장응력 하의 균열진전 문제에 대하여 균열의 분기가 발생하는 위치를 조절하기 위하여 정해진 시간구간에서 변형에너지 값을 줄이는 방향으로 최적설계를 수행하였다. 최적의 재료분포로 해석을 수행한 결과 균열의 분기점을 늦출수 있음을 확인하였다.