• Composites Research
• /
• 제21권4호
• /
• pp.22-28
• /
• 2008

복합재료 체결부는 전체 복합재 구조물의 성능을 결정하는 중요한 부분이므로, 체결부에 대한 해석과 강도평가는 매우 중요하다. 본 논문에서는 복합재 접착 체결부의 강도를 실험적으로 평가하고 분석하였으며, 구조해석으로 평가한 체결부의 강도와 상호 비교하였다. 접착 체결부의 강도예측을 위하여 최대 변형률 이론과 파손영역 이론을 사용하였으며, 비선형 유한요소 해석을 통해 제안된 파손영역비를 기준으로 접착 체결부의 파손강도를 예측할 결과, 최대 22.2% 범위 내에서 파손강도를 예측할 수 있었다.

• Structural Engineering and Mechanics
• /
• 제53권5호
• /
• pp.1017-1030
• /
• 2015

In this study, the finite element method was used to analyze the distribution of the adhesive shear stresses in the single-lap bonded joint of two plates 2024-T3 aluminum with and without defects. The effects of the adhesive properties (shear modulus, the thickness and the length of the adhesive were highlighted. The results prove that the shear stresses are located on the free edges of the adhesively bonding region, and reach maximum values near the defect, because the concentration of high stress occurs near this area.

• 대한기계학회논문집
• /
• 제18권1호
• /
• pp.85-92
• /
• 1994

With the wide application of fiber-reinforced composite meterial in aircraft space structures and robot arms, the design and manufacture of composite joints have become a very important research area because they are often the weakest areas in composite structure. In this paper, the torque transmission capacities of the adhesive tubular single lap joint and double lap joint were studied. The stress and torque transmission capacity of the adhesive joints were analyzed by the finite element method and compared to the experimental results. The torque capacity of the double lap joint was increased 2.7 times over that of the single lap joint. Also, the fatigue limit of the double lap joint was increased 16 times over that of the single lap joint.

• 한국건축시공학회:학술대회논문집
• /
• 한국건축시공학회 2013년도 추계 학술논문 발표대회
• /
• pp.177-178
• /
• 2013

Steel structures of the seaside area are naturally led to surface corrosion due to incoming salt. Signature measures for this are to replace steel with steel material with a high corrosion-resistance and to block salt and other deteriorative factors beforehand through finishing work such as surface coating. However, the variety in steel materials, finishing type, and construction methods makes adhesive weight of incoming salt different depending on each type. For this research, measurement results derived from an enhancement experiment on artificial incoming salt adhesive to 4 steel finishing types and 2 material types identified a difference of adhesive weight by each sampler.

• 한국전산구조공학회논문집
• /
• 제36권1호
• /
• pp.57-65
• /
• 2023

본 연구는 딥러닝을 위한 비선형 변환 접근법을 사용하여 Single-lap joint의 접착 영역을 조사하기 위한 진동 응답 기반 탐지 시스템을 제시한다. 산업 혹은 공학 분야에서 분해가 쉽지 않은 구조 내에 보이지 않는 부분의 상태와 접착된 구조의 접착 부위 상태를 알기 어려운 문제가 있다. 이러한 문제를 해결하기 위해 본 연구는 비선형 변환을 이용하여 기준 시편의 진동 응답으로 다양한 시편의 접착 면적을 조사하는 탐지 방법을 제안한다. 이 연구에서는 CNN 기반 딥러닝으로 진동 특성을 파악하기 위해 비선형 변환을 적용한 주파수 응답 함수를 사용했고 분류를 위해 가상의 스펙트로그램을 사용했다. 또한, 제시된 방법을 검증하기 위해 알루미늄, 탄소섬유복합재 그리고 초고분자량 폴리에틸렌 시편에 대한 진동 실험, 분석적 해, 유한요소해석을 수행했다.

• Design & Manufacturing
• /
• 제10권1호
• /
• pp.36-40
• /
• 2016

Connectors transmit electric signals to different parts in compact mobile display products. As products that apply this have become lightweight and smaller in size, there are growing demands for smaller and more integrated connectors, which are internal parts of the products. As a measure to address these demands, there is the planar array connector that minimizes the part by arranging the single-direction BTB connectors to two directions. As connectors become smaller in size and more highly integrated, maintaining intensity to prevent defects during impact and maintaining adhesive force to smoothly transmit electric signals are growing in importance. Thus, in order to identify the impact of concave shaping on improving adhesive power in connector terminal pins as a method to increase the connecting power of planar array connector terminal pins, this study predicted and examined the concave shaping method, number of concave shapes, and the adhesive power according to the size of the concave shape through CAE. For concave shaping, the model that added concave shaping towards the lower part of the connector terminal pin and added spokes for the area pressed down by the concave shaping was 0.74 N, showing increased adhesive force compared to existing models. Furthermore, when applying two concave shaping, rather than just one, there was a tendency for adhesive force to increase. In the case of adhesive power trends according to the size of the concave shaping, adhesive power increased and the width of the concave shape decreased, and the biggest adhesive force trends were shown when the concave shaping depth was 0.01mm.

• 접착 및 계면
• /
• 제7권4호
• /
• pp.28-31
• /
• 2006

Due to the miniaturization of MEMS and microelectronics the joining techniques also have to be adjusted. The dosing technology with viscous adhesives does not permit reproducible adhesive volumes, which are clearly under a nano-liter. A nano-liter means however a diameter of bonding area within the range of several 100 micrometers. Additional, viscous adhesives need a certain time, until they are cross linked or cured. The problem especially in the MEMS is the initial strength, since it gives the time, which is needed for joining an individual adhesive joint. The time up to the initial strength is with viscous, also with fast curing systems, within the range of seconds until minutes. Until the reach of the initial strength, the micro part must be fixed/held. Without sufficient adjustment/clamping it can come to a shift of the micro parts. Also existing micro adhesive bonding processes are not batch able, i.e. the individual adhesive joints of a micro system must be processed successively. In the context of the WCARP III 2006 now an innovative method is to be presented, how it is possible to solve the existing problems with micro bonding. i.e. a method is presented, which is batch able, possess a minimum joining geometry with some micrometers and is so fast that no problems with the initial strength arise. It is a method, which could revolutionize the sticking technology in the micro system engineering.

• 폴리머
• /
• 제39권3호
• /
• pp.514-521
• /
• 2015

본 연구는 자동차, 건축, 디스플레이 부품 접합 등에 사용되는 다층구조형 양면 점착테이프에 대한 것으로 UV 경화에 의해 제조된 아크릴폼 기재에 용제 건조형 점착제(AD)를 양면에 붙이고 피착제 종류에 따른 박리강도와 전단접착강도를 고찰하였다. AD 종류와 기재 조성에 따른 접착력 변화 및 피착재로 사용한 플라스틱에 대한 접착력을 고찰한 결과, AD의 분자량(MW)이 증가할수록 박리강도 및 전단접착강도가 증가하였으나 약 65만 이상의 MW를 가진 AD는 접착력이 감소하는 거동을 보였다. 양면 점착테이프에 사용된 AD층 두께가 얇을수록 온도감소와 함께 높은 물성 값을 보였다. 기재와 AD와의 계면접합 특성은 MW 615000(AD-4)을 사용한 것이 가장 우수하였으며, MW가 615000보다 낮으면 기재인 아크릴 폼과의 계면이 분리되는 결과를 보였다. 따라서 본 연구에서 검토한 다층구조형 양면 점착테이프는 표면에너지가 낮은 플라스틱 부품 및 곡면 부위에 적용가능한 산업분야에 유용하게 사용될 수 있을 것으로 판단된다.

• 대한치과교정학회지
• /
• 제3권1호
• /
• pp.21-28
• /
• 1972

저자는 direct bonding system의 pretreatment액 처리후 Epoxy adhesive의 bonding strength의 변화를 측정하기 위해서 발거된 상악 전치 진면 법랑질 표면에 pretreatment액으로서 $65\%$ phosphoric acid를 도포한 실험군과 도포하지 않은 비교군을 비교연구하고 임상에 적용하여 다음과 같은 결과를 얻었다. 1. 법랑질 표면에 pumicing과 $65\%$ phosphoric acid를 도포했을때 joint strength는 현저히 상승했다. 2. Epoxy adhesive의 bonding strength는 plastic attachment를 치아면에 접착유지시키기에 충분하며 임상적으로 이용할 수 있다. 3. Joint area가 클 수록 bonding strength는 증가했다.

• Journal of Periodontal and Implant Science
• /
• 제33권1호
• /
• pp.91-102
• /
• 2003

Several effective treatment methods and materials have been developed for the treatment of furcation involvement. Currently, the combination of guided tissue regeneration (GTR) and bone grafts is the most commonly prescribed method of treating furcation involved defects. But because these cases often present with poor accessibility, placement of the membrane may be difficult and consequently, clinically impractical. In this study, the alveolar bone healing patterns of adult beagle dogs presenting with alveolar bone destruction treated by one of two methods - treatment using solely bone allografts (BBP(R)), or treatment using bone allografts (BBP(R)) stabilized by a fibrin adhesive - were comp ared. The effects of the fibrin adhesive on the initial stabilization of the newly formed bone, subsequent regeneration of bone, and the feasibility of the clinical application of the fibrin adhesive were analyzed. The results of the study were as follows: 1. Clinical signs of inflammation at the 4-8 week interval were not observed: but signs of mild inflammation were histologically observed at the 4-week interval. 2. Allografts stabilized by fibrin adhesive showed good bone formation, whereas defects treated with only the allograft material showed incomplete alveolar bone regeneration. 3. Allografts stabilized by fibrin adhesive showed a decrease in the amount old bone with a concurrent increase in the formation of new lamellar bone four weeks post-op, whereas defects treated with only the allograft material showed no new lamellar bone formation at the same interval. 4. In detects treated with only the allograft material, the defective area was filled with connective tissue 8-weeks post-op, whereas fibrin adhesive stabilized allografts showed viable connections between the original bone and the newly formed bone, in addition to neovascularization 8-weeks post-op. The results of this study show that concurrent use of fibrin adhesive materials can stabilize the allograft material and aid in new bone formation Although the stability of fibrin adhesives fall short of the results achievable by GTR membranes, in cases presenting with poor accessibility that contraindicate the use of membranes, fibrin adhesive materials provide a viable and effective alternative to graft stabilization and new bone formation.