• Journal of Communications and Networks
• /
• v.1 no.3
• /
• pp.182-188
• /
• 1999

The optimal joint maximum-likelihood sequence estima-for using an array of antennas is derived for synchronous direct sequence-code division multiple access (DS-CDMA) system. Each user employs a rate 1/n convolutional code for channel coding for the additive white Gaussian noise (AWGN) channel. The array re-ceiver structure is composed of beamformers in the users' direc-tions followed by a bank of matched filters. The decoder is imple-mented using a Viterbi algorithm whose states depend on the num-ber of users and the constraint length of the convolutional code. The asymptotic array multiuser coding gain(AAMCG)is defined to encompass the asymptotic multiuser coding gain and the spatial information on users' locations in the system. We derive the upper and lower bounds of the AAMCG. As an example, the upper and lower bounds of AAMCG are obtained for the two user case where each user employes the maximum free distance convolutional code with rate 1/2. The enar-far resistance property is also investigated considering the number of antenna elements and user separations in the space.

• Journal of the Microelectronics and Packaging Society
• /
• v.24 no.4
• /
• pp.1-7
• /
• 2017

Aluminum alloys have been widely used in many fields such as electronic, structure, aero-space and vehicle industries due to their outstanding thermal and electrical conductivity as well as low cost. However, they have some difficulties for using in brazing process because of the strong oxide layer of $Al_2O_3$ on the surface of Al alloy. In addition, their melting point is similar to that of brazing filler metal resulting in thermal damage of Al alloys. Therefore, it is very important to understand the brazing principles, filler metal and its properties such as wetting, capillary flow and dissolution of base metal in the Al brazing process. This paper reviews the brazing principles, aluminum alloys, and brazing fillers. In the case of brazing principle, some formula was used for calculation of capillary force and the dissolution to obtain the best condition of Al brazing. In addition, the advanced research trends in Al brazing were introduced including thermal treatment, additive for improving property and decreasing melting point in Al brazing process.

• Journal of the Korean Ceramic Society
• /
• v.46 no.1
• /
• pp.24-29
• /
• 2009

The suspension of $Al_2O_3$ which has long-term stability was made by mechanical milling. Thin films were evaluated and made to use as coating materials. A particle size of the suspension manufactured was 98 nm when 2 mt% nitric acid was added. It indicated that viscosity of the suspension is 12 cps and that it had the long-term stability. Thickness which was from 200 nm to 600 nm of the thin films was able to be made by adjusting draw rate and organic additive. Cracks of thin films at room temperature were prevented by adding Ethyl cellulose from 0.5 wt% to 2 wt%. The thin film heated at $500^{\circ}C$ indicated a hydrophilic property against water and an excellent permeability against a visible ray.

• Proceedings of the Korea Concrete Institute Conference
• /
• 1999.10a
• /
• pp.73-76
• /
• 1999

In recent, concrete material like specific cement and additives having many functions hsa been developed. In road pavement, ultra high early strength cement or organic material are used to open the road early, but there are many restrictions like workable time and special equipment. We aim to developed specific concrete which 1 day strength is over 300kgf/$\textrm{cm}^2$ to open the road within one day and workable time is maintained over 1 hour that can make the concrete ready mixed concrete. In this study, we are convinced if the ratio of hauyne clinker or its additive is increased early strength property is progressed and if the ratio of non hydrous gypsum is increased longtime strength is progressed. The concrete strength is 290-310 kgf/$\textrm{cm}^2$ at 1 day, 570-640 kgf/$\textrm{cm}^2$ at 28 day and the workable time is maintained over 30 minutes. As the results of this experiments We find out the possibility to developed the 1 day usable ready mixed concrete with high early strength.

• Proceedings of the Materials Research Society of Korea Conference
• /
• 2003.11a
• /
• pp.140-140
• /
• 2003

$UO_2$-5wt%CeO$_2$ 분말에 첨가제 Li$_2$O을 첨가하여 소결분위기, 온도 및 첨가량이 소결체의 치밀화와 결정립성장에 미치는 영향을 조사하였으며, $UO_2$-5wt%CeO$_2$소결체의 산화에 의한 분말화 거동을 산화조건에 따라 측정하여 이를 $UO_2$소결체의 분말화 및 산화거동과 비교 분석하였고, 불량 scrap 소결체를 재사용하기 위해 산화실험에서 얻은 최적 산화조건으로 소결체를 분말화하여 원료분말에 첨가, 분말처리후 소결하여 이것이 소결체의 특성에 미치는 영향을 분석하였다. $UO_2$-5wt%CeO$_2$에 Li$_2$O를 첨가하여 소결할 경우, 온도에 대한 영향은 크지 않았으나 첨가량 및 분위기에 따른 치밀화와 결정립성장이 다르게 나타났다. 산화실험에서는 $UO_2$-5wt%CeO$_2$ 혼합소결체시료가 $UO_2$보다 산화에 필요한 유도시간이 길게 나타났으며, 산화온도가 증가함에 따라 무게증가는 감소하였다. 분말처리에서 혼합-분쇄한 경우에는 scrap 첨가량에 따라 밀도는 감소하나, 결정립이 성장하였으며, 전체 기공분율은 증가하였다.

• Journal of the Korean Ceramic Society
• /
• v.30 no.5
• /
• pp.381-388
• /
• 1993

Due to the anisotropy of thermal expansion, LAS system which has low thermal expansion property is hard to obtain a dense sintered body. Therefore, the thermal expansion coefficient and the mechanical strength were decreased. In this study, mullite, which has good mechanical properties in high temperature and comparatively low thmeral expansion coefficient, was taken as a additive in LAS system. And then, sintering, thermal, and mechanical properties were investigated. The results are follows; When mullite is added in eucryptite composition (Li2O.Al2O3.2SiO2) of LAS system, the creation of liquid phase results in the densification of sintered body and the specimen sintered at 136$0^{\circ}C$ for 2 hours shows optimum sintering condition. With the addition of mullite in eucryptite composition, mechanical strength is increased by the control of grain growth. Especially, flexual strength of EM0 specimen was about double value than the basic composition. Thermal expansion coefficients of EM0 and EM15 specimens sintered at 136$0^{\circ}C$ were -8.23$\times$10-6/$^{\circ}C$ and -4.90$\times$10-6/$^{\circ}C$ in the temperature range of RT.~80$0^{\circ}C$. As the mullite content are increased, negative thermal expansion ratios are decreased.

• Journal of Institute of Convergence Technology
• /
• v.3 no.1
• /
• pp.15-18
• /
• 2013

The next generation alternative fuel of diesel, DME (Dimethyl Ether) discharges particulate matter hardly due to chemical structural as oxygen-fuel so it has the eco-friendly property. Despite these advantages, the DME has the technical difficulties to apply to the diesel engine because of a low calorific value, viscosity and compressibility effects. From this point of view, we performed experimental studies on improved reliability of DME common-rail vehicle and lubricity enhancement of DME fuel for empirical distribution of eco-friendly DME fuel. Also we analyzed solubility of lubrication enhancer according to a drop in temperature, try to secure reliability about core parts of DME vehicle by applying lubrication enhancer in the DME common-rail vehicle.

• Fashion & Textile Research Journal
• /
• v.15 no.4
• /
• pp.630-634
• /
• 2013

Cow leather coated with polyurethane film that contains various organic photosensitizers was investigated to demonstrate the antimicrobial properties in the application of the material to protective clothing and home appliances. To prepare the antimicrobial coating on leather surfaces with high potency against microbes, photoactive agents, such as benzophenone (BP), 4,4'-bis(dimethylamino) benzophenone (MK), 4,4'-dihydroxybenzophenone (DHBP) and methylene blue (MB), were incorporated into polyurethane-based coating solutions. The photoactive antimicrobial agent treated leather samples were characterized by SEM, color appearance, color fastness against abrasion, and antimicrobial tests. The optical properties of organic photosensitizers indicated that active UV absorbance ranges were different: BP (around 250 nm), MK (around 360 nm), DHBP (around 305 nm) and MB (around 295 nm &570 nm-685 nm). The intensity of the UV absorbance curve at the UVA light wavelength for the antimicrobial test showed the highest value with MK; subsequently, this was followed by MB, DHBP and BP in decreasing order. The treated-leather samples demonstrated excellent antibacterial activity under UVA light. The antimicrobial effects for the Staphylococcus aureus were superior to Escherichia coli. Moreover, the polyurethane finishing showed an effective durability to abrasion. The overall results indicated that DHBP is the most suitable PU coating additive to provide antimicrobial properties to leather as well as color and surface appearance than MK, MB, and BP.

• Membrane and Water Treatment
• /
• v.7 no.4
• /
• pp.355-365
• /
• 2016

The improvement of fouling resistance of porous polymeric membrane is one of the most important targets in membrane preparation for water purification in many process like wastewater treatment. Membranes can be modified by various techniques, including the treatment of polymer material, blending of hydrophilic polymer into polymer solution, and post treatment of fabricated membrane. This research proposed the modifications of morphology and surface property of hydrophobic membrane by blending polyethersulfone (PES) with three polymeric additives, polyvinylpyrrolidone (PVP), Pluronic F127 (Plu), and Tetronic 1307 (Tet). PES hollow fiber membranes were fabricated via dry-wet spinning process by using a spinneret with inner and outer diameter of 0.7 and 1.0 mm, respectively. The morphology changes of PES blend membrane by those additives, as well as the change of performance in ultrafiltration module were comparatively observed. The surface structure of membranes was characterized by atomic force microscopy and Fourier transform infra red spectroscopy. The cross section morphology of PES blend hollow fiber membranes was investigated by scanning electron microscopy. The results showed that all polymeric additives blended in this system affected to improve the performances of PES membrane. The ultra-filtration experiment confirmed that PES-PVP membrane showed the best performance among the three membranes on the basis of filtration stability.

• Journal of the Korean Graphic Arts Communication Society
• /
• v.22 no.2
• /
• pp.199-211
• /
• 2004

The drying speed of gravure ink are very fast because of evaporation drying type. The gravure ink are fitly selected variety resin and solvent for a wide range printing are adopted. Moreover, after-manufacture handling is necessary to various purposes. Though composition of gravure ink are same those of another printing ink, the viscosity of it are vary low compare with another printing inks. As property of variety printed matters, improvement of performance of printing layer and suitable after-manufacture handling, the more research of gravure ink are to be continue for development of printing technology. Generally, the gravure ink are made up resin, pigment, solvent and additive. Especially solvent are fitly selected for solution of resin, viscosity, and drying speed. Furthermore, it tis care of bad smell of remaining resin, poison and danger of fire of it. Because of the prevention of air pollution as restriction deflation of solvent, custody of dangerous object and improvement of work environment as labor safety hygiene and fire-low, the environment restriction of printing business become strict. This study has purpose of development of gravure ink of involved 30% below of alcohol is used for PVC film printing.