• Journal of the Korea Institute of Information and Communication Engineering
• /
• v.15 no.8
• /
• pp.1687-1694
• /
• 2011

In this paper, we propose the design procedure of a digital IF system for the OFDM based WLAN system and examine its performances. Along with the decision procedure of ADC sample rate, NCO frequency and the required decimation ratio, we show the decimation ratio is accomplished through the use of a CIC filter and a MHBF. We also show that the amplitude distortion occurred in the decimation filters can effectively be compensated by a ISOP filter and an additional FIR filter, which leads to the reduction of the overall hardware complexity. Finally, we examine the BER performance of the proposed system and compare it with a theoretical one that excludes filter non-linearities.

• Animal Systematics, Evolution and Diversity
• /
• v.31 no.1
• /
• pp.31-41
• /
• 2015

A new species of the genus Farranula Wilson, 1942 (Cyclopoida, Corycaeidae) is described based on both sexes collected off Chuuk Island in Micronesia (West Central Pacific). The new species F. dahlae differs from its close congener F. gibbula (Giesbrecht, 1891) in the following combination of characters in both sexes: body length is longer, length to width ratio of caudal rami is larger, basal element of maxilliped is distinctly longer, and terminal spine to distal segment ratio of P4 is smaller; while in females, lateral margins of fourth pedigerous somite are extended to mid-region of second urosomal somite, maximum width of the second urosomal somite is located at middle region in dorsal and lateral views, and length ratio of caudal seta III to seta V is much larger; and in males, sharply contracted portion of second somite is located at two-thirds distance from anterior margin. Some additional morphological details of F. gibbula are given and a key to species of the genus Farranula is provided.

• The Journal of Asian Finance, Economics and Business
• /
• v.7 no.11
• /
• pp.1113-1122
• /
• 2020

The purpose of this study is to examine how the Indian banks have adjusted their risk-based capital ratios during 2009-2018 to meet the regulatory requirements. Banks can, in principle, increase their risk-based regulatory capital ratio, either by increasing their levels of regulatory capital or by shrinking their risk-weighted assets by adjusting asset growth or risk in the portfolio. We investigate banks' capital behavior by decomposing the change in the capital ratio into the contribution of its components and analyzing their variance across regulatory regimes and banks' ownerships. We further investigate how each component of the capital ratio is adjusted by the banks by breaking down them into balance sheet items. We find that the banks' capital behavior significantly differed between public and private sector banks and between the two regulatory regimes. During Basel II, banks, in general, followed a strategy of aggressive asset growth with increased risk-taking. The decline in the CRAR because of such an expansionary strategy was adjusted by augmenting additional capital. However, during Basel III, due to higher capital requirements, both in terms of quantity and quality, banks followed a strategy of cutting back their asset growth and reducing the risk in their portfolio to maintain their CRAR.

• Proceedings of the Korean Geotechical Society Conference
• /
• 2002.10a
• /
• pp.545-552
• /
• 2002

The purpose of this paper is to investigate permeability characteristic of soil-bentonite landfill liner and development of desirable liner system. In this study, permeability tests for soil-bentonite, reactive soil-bentonite and apply bentomat and reactive mat are carried out under the low and high water pressure. According to test result, additional amount of bentonite decreases the coefficient of permeability up to the bentonite mixture ratio of 15%. Therefore, the permeability test for landfill liner's indicated that the use of general water would be in more safe side because the liner system show low permeability duet decrease effect of porous by suspended soild(SS). The permeability of leachate for Zeolite mixture ratio 0, 5, 10% with bentonite mixture ratio 15% showed negligible variation in the permeability with general water. Therefore, Zeolite could be used as a successful that is available purification material for the treatment of leachate, without changing the of landfill liners. Also odious smell could be removed by adding smell amount of Zeolite to the leachate. It was revealed that the bentomat and reactive mat installed in soil-bentonite layer effectively improved the permeability as well as purification of the leachate.

• The Transactions of the Korea Information Processing Society
• /
• v.6 no.5
• /
• pp.1143-1152
• /
• 1999

A Mobile computing environment is a new paradigm which provides users with the access to information irrespective of users' location. A transaction scheduling method for the mobile computing environment must be designed so that database consistency is maintained with considering the limited performance of mobile hosts and the narrow bandwidth of a wireless network. The scheduling method using a lock has some problems: the high message overhead between a server and a mobile host for maintaining a lock and the high abort ratio of the mobile transactions owing to violating the serializability when a mobile host uses a cache. So, in this paper, we propose an efficient transaction management method using timestamp to resolve these problems. The proposed method is used in the environment under which a mobile host uses a cache having two versions for each cached data item and a server maintains several versions for each data item. So, even though a mobile transaction is executed during several broadcasting interval, can be committed. As a result, the proposed method can improve the commit ratio of the mobile transactions by maintaining multiversion for each data item and does not require the additional message exchange to schedule transactions by using timestamp.

• 사회경제평론
• /
• v.31 no.2
• /
• pp.39-69
• /
• 2018

We measured industrial labor income shares and investigated their determinants. Excluding industries where non-wage earners are not countable, we constructed 22 industry labor income shares from 1993 to 2015. Even though labor income shares in manufacturing industries declined more than in service industries, the economy-wide decline was not driven by structural changes but by within-industry effects. We found that rise in capital-labor ratio, R&D intensity, export dependence, and irregular job ratio contributed to the fall in labor income shares. When we examined manufacturing industries separately, overall results were about the same. But in that case we had additional findings that the rise in import dependence and outsourcing ratio lowered labor's shares, while minimum wage increases raised them.

• Journal of Powder Materials
• /
• v.28 no.6
• /
• pp.478-482
• /
• 2021

The effect of the process conditions of high-velocity oxygen fuel (HVOF) thermal spray coating on the porosity of the coating layer is investigated. HVOF coating layers are formed by depositing amorphous FeMoCrBC powder. Oxygen pressure varies from 126 to 146 psi and kerosene pressure from 110 to 130 psi. The Microstructural analysis confirms its porosity. Data analysis is performed using experimental data. The oxygen pressure-kerosene pressure ratio is found to be a key contributor to the porosity. An empirical model is proposed using linear regression analysis. The proposed model is then validated using additional test data. We confirm that the oxygen pressure-kerosene pressure ratio exponentially increases porosity. We present a porosity prediction model relationship for the oxygen pressure-kerosene pressure ratio.

• Proceedings of the Korean Institute of Building Construction Conference
• /
• 2022.11a
• /
• pp.205-206
• /
• 2022

This study intends to conduct tests on subsidence and drying shrinkage by mixing CaO-CSA expansion materials to ensure the stability of CLC, and to understand its properties. Based on CLC of 0.6, the replacement ratio of CaO-CSA expansion material was conducted at five levels compared to blast furnace slag, and the results are as follows. The replacement of CaO-CSA expansion material at an appropriate level produces ethringhite and potassium hydroxide, and it is believed that the internal voids of CLC and the Tobelmorite interlayer structure are charged to increase the structural stability, leading to an increase in compressive strength and a decrease in the drying shrinkage. However, it is judged that tissue relaxation due to excessive substances in the high replacement ratio affects the stability of CLC. In the future, we will conduct additional experiments on density, absorption rate, flow test, and settlement, and evaluate and analyze the stability of CLC by selecting the optimal replacement ratio of CaO-CSA expansion materials.

• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.18 no.11
• /
• pp.725-730
• /
• 2017

The strength ratio of the main structures of buildings gradually increasing, due to the advances made in analysis and cost saving techniques. In this study, to examine the stability of industry buildings using sandwich panels as roof assemblies, we examine the changes in the moment strength ratio of the main structures caused by increasing the roof load. This study adopts the PEB structure and three H-steel structure as the structural analysis models. In the case where the additional load exceeds about 11% of the roof design load, the strength ratio exceeds 1 for the main structure. In the case where the additional load exceeds about 36%(of the roof design load), the working moment exceeds the plastic moments, which leads to major damage to the structure. This study compares 1) the maximum load according to the purlin spaces, 2) the maximum load by KS, and 3) the maximum load calculated from the test results of the manufacturer.The maximum bearing load of the panels determined by all three methods exceeds the structure failure threshold load of the main structure. This study provides evidence that an unexpected increase in the roof load might cause the whole structure to collapse, due to the failure of the main structural members, before the failure of the roof assemblies. Therefore, information on the structural performance of the sandwich panels is required for the structural design, and the sandwich panels should be considered to be an integral part of the overall structural design.

• Journal of the Korean Society of Radiology
• /
• v.9 no.5
• /
• pp.307-314
• /
• 2015

This study was conducted in reducing the involuntary motion artifacts because of lungs and heart movements as well as the aliasing artifacts generated during the use of the reduced-FOV EPI technique while performing breast MRI. Performed on a total of 38 obesity female subjects who visited the clinic for pre-examination before surgery within the period from August 1 to November 30, 2014. The 3.0T MRI scanner equipped with a breast scanning coil. Qualitative and quantitative analyses were each used for the evaluation of the acquired images while an Paired T-test and Wilcoxon rank test were performed to check the statistical significance. The variation ratio rose by 15.69% with the additional application of a pre-saturation pulse in the lesion, by 13.72% near the lesion, and 20.63% in the fat and the contrast-to-noise ratio rose by 10.58% in and near the lesion and by 12.03% in the lesion and fat, respectively. there were increases of 22.05% and 21.42% at 0 and 1000 respectively in qulitative evaluation and growth of 16.10% in apparent diffusion coefficient. it showed a statistically significant result(p<0.05) in signal to noise ratio, contrast to noise ratio, diffusion slope coefficient and apparent diffusion coefficient. The involuntary movements artifacts that occur in the phase encoding direction and the aliasing artifacts are considered to be reduced to obtain the best image in the additional use of the pre-saturation pulse as DWI is acquired.