• 한국진공학회:학술대회논문집
• /
• 한국진공학회 2011년도 제40회 동계학술대회 초록집
• /
• pp.334-334
• /
• 2011

We applied N-ion bombardment and heat treatment to the Cu thin films deposited on aluminum oxide layer for the enhancement of adhesion. With e-beam evaporation method. $1,000{\AA}$ thick Cu pre-bombardment layer was deposited on the aluminum oxide surface and then N-ion beam was bombared in order to mix the atoms at the film/substrate interface. Additional $4,000{\AA}$-thick Cu film was the coated. Subsequently, the ion mixide Cu on aluminum oxide was annealed at $200^{\circ}C$ and $300^{\circ}C$ in vacuum.

• 한국재료학회지
• /
• 제16권4호
• /
• pp.272-275
• /
• 2006

In order to evaluate the possibility of Polymethyl methacrylate (PMMA) as a binder on hydroxyapatite (HAp) which has good biocompatibility, the properties of HAp compacts with PMMA were examined. When adding 50 wt% of PMMA on HAp and pressed, the compression strength and the hardness of the compacting body were 168MPa and 55 Hv, respectively, and the strength of compacts was higher than that of cortical bone and the hardness was similar to the value of molar. We demonstrated that HAp ceramics can be obtained without additional heat treatment and machining of the ceramic was feasible. Therefore, the HAp compacts have potential to apply to implant or artificial bone after the clinical trials guarantees biocompatibility of it.

• 한국전기전자재료학회:학술대회논문집
• /
• 한국전기전자재료학회 1999년도 춘계학술대회 논문집
• /
• pp.251-254
• /
• 1999

A new multi-seeding process for the growth of YBa$_2$Cu$_3$Oxx single crystals was developed. This process introduces an additional heating step to peritectic temperature and a subsequent slow cooling step to the growth temperature following the point when the crystals contacted. The crystal growth was resumed thereafter. The results obtained with this new process were compared with those of the conventional growth process, in which materials were only kept at the growth temperature. It was observed that the liquid phase between crystals were almost completely eliminated, but that Y2ll grains were grown during this new process. There was no significant improvement in trapped magnetic field over the conventional process, which is believed to be due to the cracks generated during the oxygen heat treatment or to the growth of YBa$_2$Cu$_3$Ox grains.

• Nuclear Engineering and Technology
• /
• 제45권7호
• /
• pp.979-986
• /
• 2013

Uranium metal particle dispersion plates have been proposed as targets for Molybdenum-99 (Mo-99) production to improve the radioisotope production efficiency of conventional low enriched uranium targets. In this study, uranium powder was produced by centrifugal atomization, and miniature target plates containing uranium particles in an aluminum matrix with uranium densities up to 9 $g-U/cm^3$ were fabricated. Additional heat treatment was applied to convert the uranium particles into UAlx compounds by a chemical reaction of the uranium particles and aluminum matrix. Thus, these target plates can be treated with the same alkaline dissolution process that is used for conventional $UAl_x$ dispersion targets, while increasing the uranium density in the target plates.

• 한국분말야금학회:학술대회논문집
• /
• 한국분말야금학회 2006년도 Extended Abstracts of 2006 POWDER METALLURGY World Congress Part 1
• /
• pp.160-161
• /
• 2006

Seasonal changes have been recognized in particle characteristics and forming characteristics of iron powder with insulated coating for a compacted magnetic core because of its high hygroscopicity, due to its phosphate coating and resin binder additives. For this reason, particle characteristics and molding characteristics of the powder with diverse water absorbtivity have been studied. The result shows that the higher the volume of absorbed water, the worse the fluidity becomes, resulting in the reduction in both springback during the molding process and expansion reduction after the heat treatment. The requirement on dimension accuracy for the finished product can be satisfied with an additional drying process on the material powder, which contributes to maintain its water volume constant.

• 한국표면공학회:학술대회논문집
• /
• 한국표면공학회 2012년도 춘계학술발표회 논문집
• /
• pp.330-330
• /
• 2012

Microstructure of a marine steel with a modified AISI-1004 composition was controlled by cold rolling and heat treatment, which corrosion behavior in an artificial sea water was electrochemically determined for the each deformation direction. The lowest corrosion rate of the surface normal to the rolling direction is related t the (111) fiber structure. Additional annealing at $550^{\circ}C$ for 24 hours improves the corrosion rate which is related to re-crystallization and reduction of (111) concentration.

• Journal of Industrial and Engineering Chemistry
• /
• 제67권
• /
• pp.276-283
• /
• 2018

For the first time, polyvinyl chloride (PVC) was used as an easily-handled chlorine source for preparation of isotropic pitch-based carbon fiber (IPCF) incorporating ethylene bottom oil (EO) as a raw material. Pitch precursors were prepared by the chlorination-dehydrochlorination triggered by chlorine radicals originated from PVC; aromatization and poly-condensation reactions occurred by polyene-type radicals from PVC. Radical production and co-carbonization were facilitated by pretreatments of EO through vacuum distillation, bromination, and additional heat treatment. Pitches were prepared by the co-carbonization of pretreated EO and EO containing 20 wt% PVC, and had higher yields and better spinnability than those by simple distillation.

• 한국작물학회:학술대회논문집
• /
• 한국작물학회 2022년도 추계학술대회
• /
• pp.109-109
• /
• 2022

The global population is increasing every year, and the amount of food waste is also increasing. Direct landfilling of food waste has been prohibited since 2005, and in accordance with the London Convention in 2013, the discharge of livestock manure, sewage sludge, and food waste into the sea is prohibited. In the case of incineration to treat the discharged food waste, the heat point is lowered due to the moisture in the food waste itself, so fuel must be added. Therefore, this study was conducted to get basic data for setting the limit of application by investigating the growth and yield of crops after treating food waste dry powder mixed fertilizer (MF) on red pepper. In the experiment, continuous cultivation was carried out for two years in 2021 (1st year) and 2022 (2nd year). The treatment groups were set as Not Treatment (NT), Chemical Fertilizer (CF), Mixed Fertilizer (MF), Mixed Fertilizer×2 (MF×2). After harvest, crop growth and yield were investigated. As a result of the 1st years of growth survey, CF, MF, MF×2 show significant difference in shoot length compared to NT. About fresh weight and dry weight, CF show significant difference compared to NT. The 2nd years of growth survey, the shoot and root length, fresh weight did not show significant difference with NT. In case of dry weight, MF is significant increased compared to NT. As a result of the yield survey of the 1st year, all treatment groups did not show a significance in yield compared to the NT. In case of 2nd year, all treatment groups show significantly increased value compared to NT. The yield of MF was highest among the treatment groups. In the future, it is thought that it is necessary to quantitatively evaluate the effect of food waste dry powder mixed fertilizer through additional experiments and continuous cultivation, and to establish an appropriate amount of use and establishment of a manual based on this.

• 생명과학회지
• /
• 제26권9호
• /
• pp.1088-1096
• /
• 2016

중등도 온열요법이 종양세포에 대한 세포독성, 종양혈관에 미치는 영향 및 면역학적 영향 등 다양한 항종양 활성을 가지고 있음에도 불구하고, 중등도 온열요법은 그 자체만으로는 항암효과가 뚜렷하지 않아, 방사선치료나 항암제 치료와 병용하여 암치료에 사용되고 있으면서, 심각한 부작용이 없이 어느 정도의 긍정적인 효과를 보이고 있다. 모든 연구에서 긍정적인 결과를 보이지 못한 것은 열충격 반응 그 자체가 온열요법의 항암효과를 방해하기 때문이다. 그러므로 온열요법의 효과를 증가시키기 위해서는 온열요법의 항암효과에 대한 부정적인 영향을 제거해야 한다. 암세포뿐만 아니라 혈관, 면역 세포 및 결체조직 등을 포함하고 있는 종양조직의 열 스트레스에 대한 반응은 매우 복잡하지만, 임상적으로 사용되고 있는 약물 중 열 스트레스 반응을 조절할 수 있는 약물들이 암환자의 온열요법 치료 효과를 개선시킬 수 있는 지에 대한 연구가 필요하다. 이 종설에서는 현재 임상에서 사용하고 있는 온열요법 장치로서 최신의 기술이며, 중등도 온도가 정상 조직에 대한 부작용 없이 기존 치료법의 효과를 증가시킬 수 있기 때문에, 비침습적 체외용 고주파 중등도 온열요법을 중심으로 다룬다.

• 대한한방내과학회지
• /
• 제18권2호
• /
• pp.53-64
• /
• 1997

Many types of cancer, current therapy other than surgery and/or radiotherapy was of only limited efficacy. At the basic chinese traditional medicine(TCM) there was increased understanding of the additional basic and clinical neoplasm treatment research. The metastasis and recurrence of neoplasm was the basis of yudu(餘毒) on remained neoplasm cell and stagnation of blood, thermotoxo, phlegm, asthenia of healthy enerngy, stagnation of vital energy. The principles therapy of neoplasm on metastasis and recurrence was based on knowledge of the method of support the healthy energy and strengthen the body resistance, promote blood circulation to remove blood stasis, clear away heat and toxic materials, dissipate phlegm and disperse the accumulation of evils, regulate vital energy and disperse the depressed vital energy. But the major clinical features of neoplasm was to be considered in developing a treatment plan include (1) distinguish between clinical and pathologic staging - acute and chronic, (2) classification of pathologic pattern, and (3) distinction of body situation : for examples asthenia - sthenia etc. It was most important to distinguish between supporting the healthy and eliminating the evil factors and to treat differently at the root and the branch cause of a neoplasm. This paper's results indicate that identification and effective use of TCM medicines inhibited netastasis and decreased recurrence and then we were able to expect increasing survival rate.