• Horticultural Science & Technology
• /
• v.29 no.2
• /
• pp.130-134
• /
• 2011

Paprika (Capsicum annuum L.), a colored bell-type sweet pepper, is one of the most important money making vegetable crops in Korea. The cultivation area, total production, and exports of paprika are gradually getting increased, but the paprika cultivars used in Korea are all imported. It was well-known that the genic male sterility (GMS) is the main way to produce paprika hybrid seeds. However, it is little known that how many and what kinds of ms genes are used for breeding of paprika $F_1$ varieties. In this study, eight paprika cultivars ('Special', 'Debla', 'Plenty', 'Fiero', 'Boogie', 'Fiesta', 'Derby', and 'Minibell'), popularly cultivated in Korea and three different genic male sterile lines ('GMSP', 'GMS3', and 'GMSK') were used. For allelism test among the $F_1$ cultivars, half diallel crosses were performed. The result demonstrated that the most of the GMS in paprika cultivars except for 'Minibell' were same allele. To identify which GMS gene(s) were used for paprika $F_1$ cultivars, top crosses between previously known GMS lines and the $F_1$ cultivars were performed. As a result, we found that the $ms_k$ and the $ms_p$ genes were alleles for the GMS of 'Minibell' and for the other cultivars, respectively. We also confirmed that the GMS gene identification using GMSK-CAPS marker linked to the $ms_k$ gene and the PmsM1-CAPS marker linked to the $ms_p$ gene in $F_2$ progenies of 'Minibell' and 'Fiesta' and 'Derby' cultivars, respectively. In addition, we developed the PmsM2-CAPS marker for 'Plenty', 'Fiero', and 'Boogie' cultivars. We expect that these markers will be very useful for breeding new maternal (male sterile) line of paprika.

• Journal of Radiation Protection and Research
• /
• v.39 no.4
• /
• pp.199-205
• /
• 2014

In the field of neutron detections, $^3He$ gas, the so-called "the gold standard," is the most widely used material for neutron detections because of its high efficiency in neutron capturing. However, from variable causes since early 2009, $^3He$ is being depleted, which has maintained an upward pressure on its cost. For this reason, the demands for $^3He$ replacements are rising sharply. Research into neutron converting materials, which has not been used well due to a neutron detection efficiency lower than the efficiency of $^3He$, although it can be chosen for use in a neutron detector, has been highlighted again. $^{10}B$, which is one of the $^3He$ replacements, such as $BF_3$, $^6Li$, $^{10}B$, $Gd_2O_2S$, is being researched by various detector development groups owing to a number of advantages such as easy gamma-ray discrimination, non-toxicity, low cost, etc. One of the possible techniques for the detection is an indirect neutron detection method measuring secondary radiation generated by interactions between neutrons and $^{10}B$. Because of the mean free path of alpha particle from interactions that are very short in a solid material, the thickness of $^{10}B$ should be thin. Therefore, to increase the neutron detection efficiency, it is important to make a $^{10}B$ thin film. In this study, we fabricated a $^{10}B$ thin film that is about 60 um in thickness for neutron detection using well-known technology for the manufacturing of a thin electrode for use in lithium ion batteries. In addition, by performing simple physical tests on the conductivity, dispersion, adhesion, and flexibility, we confirmed that the physical characteristics of the fabricated $^{10}B$ thin film are good. Using the fabricated $^{10}B$ thin film, we made a proportional counter for neutron monitoring and measured the neutron pulse height spectrum at a neutron facility at KAERI. Furthermore, we calculated using the Monte Carlo simulation the change of neutron detection efficiency according to the number of thin film layers. In conclusion, we suggest a fabrication method of a $^{10}B$ thin film using the technology used in making a thin electrode of lithium ion batteries and made the $^{10}B$ thin film for neutron detection using suggested method.

• Korean Journal of Plant Resources
• /
• v.27 no.4
• /
• pp.380-391
• /
• 2014

Plants as well as crops are damaged by a combination of the hot and dry winds that has been a major factor in the reduction of crop production. A means to protect them from damaging conditions is to consider a coating material. In this study, we established laboratory screening methods to find a coating material to protect a crop from rapid transpiration caused by various factors. In a test measuring the weight loss of kidney bean seedlings for 6 days, Avion treatments decreased its weight loss (P=0.05). Owing to long-time spend in completing this assay, we performed a more simple method using a cobalt chloride paper strip, which changes from blue to red colors under water condition. Beewax, guagum, paraffin liquid, soybean oil, and PE-635 gave a waterproofing effect above 37 and 43% at 0.5 and 1 h after treatment, respectively. However, these tested materials did not show significant waterproofing results at 2 h. Although the methods produced reasonable results, a screening method to obtain more objective data is needed. An alternative is to use an instrument that can detect the transpiration of crop leaves. In a preliminary test using barley leaves, a portable photosynthesis system showed transpiration inhibition of 2% soybean oil and 10 times-diluted Avion under field conditions. In another test using the leaves of maize seedlings and apricot tree, 2% liquid paraffin and plant oils such as apricot oil, linseed oil, olive oil, and soybean oil showed significant transpiration inhibition (P=0.05). Especially, paraffin liquid and soybean oil selected from above tests gave good transpiration inhibitory effects against rice at 2%. In addition, the mixture of 2% soybean oil and a spreader showed more elevated inhibition results comparing with soybean oil or the spreader alone indicating that the spreader may be attributed to more uniform diffusion of the hydrophobic material onto the leaf surface of maize seedlings. The hydrophobic material coated physically the stomata and cuticle layers on leaf surfaces of rice. These hydrophobic materials screened in this study are expected to be used as plant coating materials.

• Journal of Life Science
• /
• v.23 no.5
• /
• pp.616-621
• /
• 2013

Aconitum pesudo-laeve var erectum has been known to possess anti-inflammatory activity and modulate the intestinal immune system. In addition, it has traditionally been used for the treatment of water retention in the body. In this study, the anti-aging and anti-diabetes effects of water and ethanol extracts from Aconitum pesudo-laeve var. erectum were investigated. The activities of each extract were measured by antioxidant tests such as DPPH and ABTS radical scavenging activity, antioxidant protection factor (PF), TBARs content, and ${\alpha}$-amylase and ${\alpha}$-glucosidase inhibition activity assay. DPPH radical scavenging activity was found in over 50% of water and ethanol extracts at $100{\mu}g/ml$, $50{\mu}g/ml$, respectively. The ABTS radical scavenging activity of ethanol extract was $99.8{\pm}0.1$% at $1,000{\mu}g/ml$ in water, which was highest among the ethanol extract concentrations. PFs measured with ${\beta}$-carotene-linoleate model systems were in the order of ethanol (1.49 PF at $1,000{\mu}g/ml$) > ethanol (1.40 PF at $500{\mu}g/ml$) > water (1.33 PF at $1,000{\mu}g/ml$) > water (1.27 PF at $500{\mu}g/ml$). TBARs content in ethanol extracts ($1,000{\mu}g/ml$) was $0.16{\pm}0.03{\mu}M$, which was lower than that of water extracts and other ethanol extract concentrations. The extracts also showed over 90% of ${\alpha}$-amylase inhibition and over 60% of ${\alpha}$-glucosidase inhibition ratio in water ($1,000{\mu}g/ml$) and ethanol extracts (100~$1,000{\mu}g/ml$). These results suggest that Aconitum pesudo-laeve var. erectum extracts could be used as a cosmetic source and preventive agent for aging and diabetes.

• Land and Housing Review
• /
• v.9 no.3
• /
• pp.1-8
• /
• 2018

In Europe and the United States, the use of limit states design has almost been established for pile foundation design. According to the global trend, the Ministry of Land, Transport and Maritime Affairs has established the basic design criteria of the bridge under the limit state design method. However, it is difficult to reflect on the design right now because of lack of research on resistance coefficient of the pile method and ground condition. In this study, to obtain the resistance coefficient of PHC bored pile which is widely used in Korea, the bearing capacity calculated by the LH design standard and the bridge design standard method, the static load test(21 times) and the dynamic load test(EOID 21 times, Restrike 21) The reliability analysis was performed on the results. The analysis of the resistance coefficient of PHC bored pile by loading test was analyzed by adding more than two times data. As a result, the resistance coefficient obtained from the static load test(ultimate bearing capacity) was 0.64 ~ 0.83 according to the design formula and the target reliability index, and the resistance coefficient obtained from the dynamic load test(ultimate bearing capacity) was 0.42~0.55. Respectively. The resistance coefficient obtained from the modified bearing capacity of dynamic load test(EOID's ultimate end bearing capacity + restrike's ultimate skin bearing capacity) was 0.55~0.71, which was reduced to about 14% when compared with the resistance coefficient obtained by the static load test(ultimate bearing capacity). As a result of the addition of the data, the resistivity coefficient was not changed significantly, even if the data were increased more than 2 times by the same value or 0.04 as the previous resistance coefficient. In conclusion, the overall resistance coefficient calculated by the static load test and dynamic load tests in this study is larger than the resistance coefficient of 0.3 suggested by the bridge design standard(2015).

• Journal of Korean Ophthalmic Optics Society
• /
• v.20 no.2
• /
• pp.93-104
• /
• 2015

Purpose: This study aimed to analyze the research trends of Ophthalmic Optic by targeting the papers published in the Journal of Korean Ophthalmic Optics Society and serve it as a basis for future researches. Methods: This study was conducted through a statistical analysis of the general characteristics, researcher characteristics, research characteristics and the research trends from total 990 papers, from the first issue to the last issue in 2014, published in the Journal of Korean Ophthalmic Optics Society. Results: Most common number of the authors of the published papers were two or three, respectively 26.8%. Most of the lead authors belong to the schools in Jeolla-do province (31.3%). Most of the educational system of which lead authors belong to is four-year-course system (43.0%). Most common research methods were optometric tests (40.9%). The most common subjects of researches are about the field of optometry (29.8%). The study shows that there were significant differences in the research methods depending on the school systems of the universities to which the lead authors belong (p=0.000). There also were significant differences in the school systems of the universities to which the lead authors belong, and research methods depending on the research subjects (p=0.000). There were meaningful differences according to the period divisions (1996 to 2004 and 2005 to 2014), i.e. the number of authors has been growing, and it is the same case for the number of the authors who belong to four-year-course universities (p=0.000). The number of papers on optometry and contact lenses have increase. The benefits of the research funds have also increased (p<0.005). In addition, the number of the lead authors in the Seoul and Chungcheong province have increased (p=0.000). Conclusions: For the development of the Ophthalmic Optics, it is necessary to broaden the stratum of researchers and deal with various research topics, And joint efforts between eyewear industry and academia and international cooperations are needed.

• Microbiology and Biotechnology Letters
• /
• v.26 no.2
• /
• pp.122-129
• /
• 1998

It were reported that antifungal mechanism of Enterobacter cloacae is a volatile ammonia that produced by the strain in soil, and the production of ammonia is related to the bacterial urease activity. A powerful bacterium SH14 against soil-borne pathogen Fusarium solani, which cause root rot of many important crops, was selected from a ginseng pathogen suppressive soil. The strain SH14 was identified as Bacillus subtilis by cultural, biochemical, morphological method, and $API^{circledR}$ test. From several in vitro tests, the antifungal substance that is produced from B. subtilis SH14 was revealed as heat-stable and low-molecular weight antibiotic substance. In order to construct the multifunctional biocontrol agent, the urease gene of Bacillus pasteurii which can produce pathogenes-suppressive ammonia transferred into antifungal bacterium. First, a partial BamH I digestion fragment of plasmid pBU11 containing the alkalophilic B. pasteurii l1859 urease gene was inserted into the BamH I site of pEB203 and expressed in Escherichia coli JM109. The recombinant plasmid was designated as pGU366. The plasmid pGU366 containing urease gene was introduced into the B. subtilis SH14 with PEG-induced protoplast transformation (PIP) method. The urease gene was very stably expressed in the transformant of B. subtilis SH14. Also, the optimal conditions for transformation were established and the highest transformation frequency was obtained by treatment of lysozyme for 90 min, and then addition of 1.5 ${mu}g$/ml DNA and 40% PEG4000. From the in vitro antifungal test against F. solani, antifungal activity of B. subtilis SH14(pGu366) containing urease gene was much higher than that of the host strain. Genetical development of B. subtilis SH14 by transfer of urease gene can be responsible for enhanced biocontrol efficacy with its antibiotic action.

• Journal of Korean Society of Environmental Engineers
• /
• v.28 no.5
• /
• pp.563-572
• /
• 2006

In order to propose optimum in-situ treatment for reducing phosphorous release from sediment of stationary lakes, a series of column tests were performed. The sediment used in experiment was very fine clay with a mean grain site $7.7{\phi}$ and high $C_{org}$ contents(2.4%). Phosphorous releases were evaluated in two ways : in lake water(with microbial effect) and in distilled water(without microbial effect). As in-situ capping material, sand and loess were used while Fe-Gypsum and $SiO_2$-Gypsum were used for in-situ chemical treatment. In case of lake water considering the effect of microorganism, phosphorous concentration rapidly decreased in the early stage of experiment but it was gradually increased after 10 days. Flux of phosphorous release for control was $3.0mg/m^2{\cdot}d$. Whereas, those for sand layer capping(5 cm) and loess layer capping(5 cm) were $2.5mg/m^2{\cdot}d\;and\;1.8mg/m^2{\cdot}d$, respectively because the latter two were not consolidated sufficiently. For Fe-gypsum and $SiO_2$-gypsum the fluxes were $1.4mg/m^2{\cdot}d$ which meant that reduction efficiency of phosphorous release was more than 40% higher than that of control. The case capping with complex layer was $1.0mg/m^2{\cdot}d$, which showed high reduction efficiency over 60%. The addition of gypsum($CaSO_4{\cdot}2H_2O$) into the sediment reduced release of Phosphorus from the sediments. Gypsum acted as a slow-releasing source of sulphate in sediment, which enhanced the activity of SRB(sulfate reducing bacteria) and improved the overall mineralization rate of organic matter.

• Restorative Dentistry and Endodontics
• /
• v.31 no.1
• /
• pp.58-65
• /
• 2006

The possibility of applying a hi-axial flexure strength test on composite resin was examined using three point and hi-axial flexure strength tests to measure the strength of the light-cured resin and to compare the relative reliability using the Weibull modulus. The materials used in this study were light-curing restorative materials, $MICRONEW^{TM},\;RENEW^{(R)}$ (Bisco, Schaumburg, USA). The hi-axial flexure strength measurements used the piston-on-3-ball test according to the regulations of the International Organization for Standardization (ISO) 6872 and were divided into 6 groups, where the radius of the specimens were 12mm (radius connecting the 3-balls: 3.75mm), 16 mm(radius connecting the 3-balls: 5mm), and the thickness were 0.5mm, 1mm, 2mn for each radius. The hi-axial flexure strength of the $MICRONEW^{TM}\;and\;RENEW^{(R)}$ were higher than the three point flexure strength and the Weibull modulus value were also higher in all of the bi-axial flexure strength groups, indicating that the hi-axial strength test is relatively less affected by experimental error. In addition, the 2 mm thick specimens had the highest Weibull modulus values in the hi-axial flexure strength test, and the $MICRONEW^{TM}$ group showed no significant statistical difference (p>0.05). Besides the 2mm $MICRONEW^{TM}$ group, each group showed significant statistical differences (p<0.05) according to the thickness of the specimen and the radius connecting the 3-balls. The results indicate that for the 2mm group, the hi-axial flexure strength test is a more reliable testing method than the three point flexure strength test.

• Journal of the Korea Concrete Institute
• /
• v.24 no.3
• /
• pp.275-283
• /
• 2012

Steel Plate for Rebar Connection was recently developed to splice rebars in delayed slab-wall joints in high-rise building, slurry wall-slab joints, temporary openings, etc. It consists of several couplers and a thin steel plate with shear key. Cyclic loading tests on slab-wall joints were conducted to verify structural behavior of the joints having Steel Plate for Rebar Connection. For comparison, joints with Rebend Connection and without splices were also tested. The joints with Steel Plate for Rebar Connection showed typical flexural behavior in the sequence of tension re-bar yielding, sufficient flexural deformation, crushing of compression concrete, and compression rebar buckling. However, the joints with Rebend Connection had more bond cracks in slabs faces and spalling in side cover-concrete, even though elastic behavior of the joints was similar to that of the joints with Steel Plate for Re-bar Connection. Consequently, the joints with Rebend Connection had less strengths and deformation capacities than the joints with Steel Plate for Re-bar Connection. In addition, stiffness of the joints with Rebend Connection degraded more rapidly than the other joints as cyclic loads were applied. This may be caused by low elastic modulus of re-straightened rebars and restraightening of kinked bar. For two types of diameters (13mm and 16mm) and two types of grades (SD300 and SD400) of rebars, the joints with Steel Plate for Rebar Connection had higher strength than nominal strength calculated from actual material properties. On the contrary, strengths of the joints with Rebend Connection decreased as bar diameter increased and as grade becames higher. Therefore, Rebend Connection should be used with caution in design and construction.