• Journal of Aerospace System Engineering
• /
• v.16 no.1
• /
• pp.56-69
• /
• 2022

Various advanced countries are accelerating the competition in the development of hypersonic weapons. North Korea is on the verge of building a new submarine equipped with a submarine-launched ballistic missile (SLBM). A series of new guided missiles tests have continued due to political competition between the U.S. and China. The Republic of Korea is planning to boost its military capabilities, which involves the development of nuclear-powered submarines, light aircraft carriers, and new guided missiles. The northeast Asian region continues to be tense amid military rivalry between the Republic of Korea, North Korea, the United States, China, Russia, and Japan. Accordingly, these countries' competition to develop weapons is also at the world's highest level. In this paper, we examine the functioning of a hypersonic weapons system conduct a technical analysis of its components. In addition, we analyze the direction of military development that the Korean military wants to pursue through the recently announced mid-term defense plan. We conclude by highlighting the technical limitations and implementation strategies to overcome the development of hypersonic weapons.

• Journal of Convergence for Information Technology
• /
• v.12 no.3
• /
• pp.244-251
• /
• 2022

This study attempted to investigate the applicability of Geranium maculatum extract as a cosmeceutical ingredient. For this, DPPH, ABTS and FRAP assays were performed to assess radical scavenging activities. To evaluate antioxidant substances, in addition, polyphenol and flavonoid concentrations were measured. Furthermore, cytotoxicity, whitening and anti-inflammatory tests were conducted, using B16F10 and RAW 264.7 cells, and the results found the followings: In the DPPH and ABTS assays, 265.8 mg ascorbic acid/g and 168.5 mg ascorbic acid/g of antioxidant capacities were found respectively. According to the FRAP assay, 1 mg Geranium maculatum extract was same with ascorbic acid 229±9 ㎍ in terms of reducing power. In polyphenol and flavonoid concentrations, 32.989±1.610 mg/g and 11.098±0.261 mg/g were observed each. The above results show that cells survived in the test concentrations more than 80 percent, confirming the low toxicity of Geranium maculatum extract. According to whitening testing, melanin synthesis was reduced depending on concentration, and at the same time, 40.62±2.07% of melanin production inhibition was found at 100 ㎍/mL. In anti-inflammatory testing, inflammation was reduced depending on concentration, and 27.86±2.82% of inhibition of inflammation was detected simultaneously, confirming the applicability of Geranium maculatum extract as a cosmeceutical ingredient.

• The Journal of The Korea Institute of Intelligent Transport Systems
• /
• v.22 no.3
• /
• pp.160-174
• /
• 2023

LiDAR plays a key role in autonomous vehicles, and to improve its visibility, it is necessary to improve its performance and the detection objects. Accordingly, this study proposes a shape for traffic safety signs that is advantageous for self-driving vehicles to recognize. Improvement plans are also proposed using a shape-recognition algorithm based on point cloud data collected through LiDAR sensors. For the experiment, a DBSCAN-based road-sign recognition and classification algorithm, which is commonly used in point cloud research, was developed, and a 32ch LiDAR was used in an actual road environment to conduct recognition performance tests for 5 types of road signs. As a result of the study, it was possible to detect a smaller number of point clouds with a regular triangle or rectangular shape that has vertical asymmetry than a square or circle. The results showed a high classification accuracy of 83% or more. In addition, when the size of the square mark was enlarged by 1.5 times, it was possible to classify it as a square despite an increase in the measurement distance. These results are expected to be used to improve dedicated roads and traffic safety facilities for sensors in the future autonomous driving era and to develop new facilities.

• Journal of the Society of Cosmetic Scientists of Korea
• /
• v.49 no.2
• /
• pp.183-192
• /
• 2023

In this study, we investigated the antioxidant activity, anti-inflammatory activity, whitening, moisturizing, wound-healing, cell proliferation and cell protective effects of 70% EtOH and hot water extract from Scutellaria baicalensis. For the anti-oxidative test, the 70% EtOH and hot water extract showed DPPH radical scavenging activities. In the anti-inflammatory tests, 70% EtOH and hot water extract inhibited the production of NO, pro-inflammatory cytokine (IL-6) and prostaglandin (PGE₂). In addition, it was confirmed that the 70% EtOH and hot water extract inhibited the melanin production, and increased production of hyaluronic acid (HA), a moisturizing factor. As a result of cell migration and proliferation assay, 70% EtOH extract promoted the cell growth in HaCaT cell. Additionally, 70% EtOH and hot water extract showed cell protective effects against UVB, and 70% EtOH extract also showed cell protective effects agianst blue light. Based on these results, it is concluded that the 70% EtOH and hot water extract from Scutellaria baicalensis could be potentially applicable as anti-oxdiative, anti-inflammation, whitening, moisturizing, wound-healing, cell proliferation and cell protective effects in cosmetic natural materials.

• Journal of Korean Tunnelling and Underground Space Association
• /
• v.11 no.1
• /
• pp.47-56
• /
• 2009

Rock bolts and shotcrete play a crucial role as a main support system in the underground space. Thus, the safety of the underground space may be affected by the defect of rock bolts. In order to evaluate the rock bolt integrity by using non-destructive technique, the transmission method of the guided ultrasonic waves, which are generated by using the piezo disk elements has been successfully performed. The energy generated by the piezo disk elements, however, is not enough for the rock bolts in the field. In addition, the piezo disk elements should be installed at the end of the steel bar during construction of the rock bolts. The purpose of this study is the devolvement of the reflection method, which may generate enough energy, and the application in the field rock bolts. Both laboratory and field tests are carried out. The guided ultrasonic waves with high energy are generated by the hammer impact with the center punch, and the AE sensor is used to measure the reflected guided waves. The received guided waves are analyzed by the wavelet transform. The peak value of the wavelet transform produces the energy velocity, which is used for the evaluation of the rock bolt integrity. The energy velocity increases with an increase in the defect ratio in both laboratory and field rock bolts. This study demonstrates that the hammer-impact reflection method may be a suitable method for the evaluation of the rock bolt in the field.

• KSCE Journal of Civil and Environmental Engineering Research
• /
• v.28 no.4C
• /
• pp.213-220
• /
• 2008

A study on cemented sand reinforced with short fibers was carried out to improve its unconfined compressive strength and brittle behavior. Nak-dong River sand was mixed with Portland cement and polyvinyl alcohol (PVA) fibers. A PVA fiber widely used for concrete reinforcement is randomly distributed into cemented sand. Nak-dong River sand, cement and fibers with optimum water content were compacted in 5 layers and then cured for 7 days. The effect of fiber reinforcement rather than cementation was emphasized by using a small amount of cement. Weakly cemented sand with a cement/sand ratio less than 8% was fiber-reinforced with different fiber ratios and tested for unconfined compression tests. The effect of fiber ratio and cement ratio on unconfined compressive strength was investigated. Fiber-reinforced cemented sand with 2% cement ratio showed up to six times strength to non-reinforced cemented sand. Because of ductile behavior of fiber-reinforced specimens, an axial strain at peak stress of specimens with 2% cement ratio increases up to 7% as a fiber ratio increases. The effect of 1% fiber addition into 2% cemented sand on friction angle and cohesion was analyzed separately. When the fiber reinforcement is related to friction angle increase, the 8% of applied stress transferred to 1% fibers within specimens.

• Korean Journal of Clinical Laboratory Science
• /
• v.55 no.2
• /
• pp.71-81
• /
• 2023

This study examined the transition process of clinical laboratory technologists' national examination and job definition in Korea and compared the differences in the national examination between Korea and neighboring countries, such as Japan and Taiwan. In Korea, the number of questions made for it was 200 (1965), 200 (1977), 300 (1982), 250 (1992), 330 (2006), and 280 (2015). The practice of clinical physiology is important for real-time monitoring, given the characteristics of physiological testing. On the other hand, there are conflicts between other occupations in the working area. Clinical molecular biology needs to be established as a new major subject considering the diagnostic importance of molecular biological tests and the speed of science and technology development. Clinical laboratory operations provide policy and guidance recommendations to technologist staff. The proposed clinical laboratory technologists' national examination comprises major subjects: clinical biochemistry, clinical hematology, clinical transfusionology, clinical immunology, clinical microbiology, clinical molecular biology, clinical histology, clinical cytology, clinical physiology, and clinical laboratory operations. In addition, this study proposes the job definition of clinical laboratory technologists, revising various chemical or physiological testing to biomedical or physiological testing required for medical practice.

• Journal of the Korean Society for Heat Treatment
• /
• v.36 no.4
• /
• pp.198-205
• /
• 2023

We investigated the effects of Al and Mg on the microstructure and hardness of the coating layer of galvanized steel sheets, by thermodynamic calculations, X-ray diffraction, scanning electron microscopy, and Vickers hardness tests of Zn-0.2Al, Zn-6Al-2Mg, and Zn-10Al-5Mg coating layers. Regardless of the alloy composition of the galvanizing bath, a Fe-Al layer was observed between the coating layer and steel sheet. The Zn-0.2Al coating layer consists of major h.c.p. Zn phase and minor f.c.c. Al phase. The fraction of f.c.c. Al phase (containing a significant amount of Zn) of the coating layer increases with increasing the chemical composition of Al of the galvanizing bath. The h.c.p. MgZn₂ phase was formed in the Al/Mg-containing Zn-6Al-2Mg and Zn-10Al-5Mg coating layers, forming Zn-Al-MgZn₂ eutectic microstructure. The primary MgZn₂ phase was additionally formed in the Zn-10Al-5Mg coating layers containing high concentrations of Al and Mg. The Vickers hardness values of Zn-0.2Al, Zn-6Al-2Mg, and Zn-10Al-5Mg coating layers were 59.1 ± 1.2 HV, 161.2 ± 5.7 HV, and 215.5 ± 40.3 HV, respectively. The addition of Al and Mg increased the hardness of the coating layer by increasing the fraction of the Al phase (containing Zn) and MgZn₂ intermetallic compound, which were harder than the Zn phase.

• The Journal of The Korea Institute of Intelligent Transport Systems
• /
• v.21 no.1
• /
• pp.64-75
• /
• 2022

The ITS performance evaluation has been performed in the evaluation of traffic data collection equipment. However, evaluation of the data collection equipment alone cannot guarantee the reliability of the traffic information. So, ITS service evaluation has to be implemented institutionally. In this study, an evaluation method has been prepared to evaluate the accuracy of travel time information in road sections. In addition, a piece of portable reference equipment was developed to collect travel time data on the road. Field tests were performed on two national road sections managed by the Seoul Construction and Management Administration (SCMA) to prepare an evaluation method considering field conditions and evaluate the reference equipment's performance. Based on the test results, the improvement of the reference equipment to collect more samples and the adjustment of collection points were discussed.

• Journal of the Korean Society of Food Culture
• /
• v.22 no.4
• /
• pp.468-474
• /
• 2007

Physicochemical and sensory characteristics of cookies with various levels of resistant starch were investigated in this study. Dough pH of 30% substituted sample group had significantly the highest value than that of all(p<0.05). Water contents of Dough were decreased with increased levels of the resistant starch in cookie preparation. The spreadability was increased as the addition levels of the resistant starch were increased. The Hunter L and a values of 30% substituted sample group had the highest values of all(p<0.05). Results of sensory characteristics of 30% substituted sample group showed significantly the lower values in hardness and crack than those in the other groups at p<0.05. Acceptance tests of cookies with 10 and 20% substituted sample groups showed higher values in savory flavor and overall acceptability than those of others.