• Journal of the Korean Geotechnical Society
• /
• v.22 no.12
• /
• pp.67-76
• /
• 2006

The reasonable assessment of the shear stiffness of a dredged soft ground and soft clay is difficult due to the soil disturbance. This study addresses the development and application of a new in-situ shear wave measuring apparatus (field velocity probe: FVP), which overcomes several of the limitations of conventional methods. Design concerns of this new apparatus include the disturbance of soils, cross-talking between transducers, electromagnetic coupling between cables, self acoustic insulation, the constant travel distance of S-wave, the rotation of the transducer, directly transmitted wave through a frame from transducer to transducer, and protection of the transducer and the cable. These concerns are effectively eliminated by continuous improvements through performing field and laboratory tests. The shear wave velocity of the FVP is simply calculated, without any inversion process, by using the travel distance and the first arrival time. The developed FVP Is tested in soil up to 30m in depth. The experimental results show that the FVP can produce every detailed shear wave velocity profiles in sand and clay layers. In addition, the shear wave velocity at the tested site correlates well with the cone tip resistance. This study suggests that the FVP may be an effective technique for measuring the shear wave velocity in the field to assess dynamic soil properties in soft ground.

• Journal of the Korean Geotechnical Society
• /
• v.25 no.8
• /
• pp.33-45
• /
• 2009

The conventional single-core PBDs have been widely used in order to accelerate consolidation settlement of soft grounds. When using the single-core PBD in a thick clay deposit, a delay of consolidation may occur due to high confining pressure in the thick deposit and necking of drains. This study is to compare the performances of soil improvement by the single-core and double-core PBD installed at a site in Busan New Port which exhibits approximately a 40m-thick clay layer. An in-situ test program was performed at the test site where a set of the double-core PBDs and single-core PBDs were installed to compare the efficiency of each drain. In addition, the discharge capacity of each PBD has been measured using the modified Delft Test. A series of laboratory tests for estimating in-situ soil properties have also been performed in order to obtain input parameters for a numerical program ILLICON. The discharge capacity of the double-core PBD is higher than that of the single-core PBD in the modified Delft Test. However it is observed from the comparative in-situ test and numerical analysis that there is no difference in the performance of ground improvement between the two drain systems. This discrepancy comes from the fact that the amount of water released during consolidation in most common field conditions is much smaller than the capacity of even the single core PBD. And thus, considering actual field conditions, it can be concluded that the single-core PBD has enough discharge capacity even in the thick clay deposit such as this test site.

• Journal of the Korean Geotechnical Society
• /
• v.26 no.11
• /
• pp.63-73
• /
• 2010

Monopiles, used as one foundation option for offshore wind turbines, are usually subjected to great cyclic lateral loads due to wind and wave. In this study, model pile load tests were performed using calibration chamber and three model piles with different pile lengths in order to investigate the behavior of laterally cyclic loaded piles driven into sand. Model test results show that the first loading cycle generates a bigger displacement than the following ones, and the permanent displacement of piles by one loading cycle decreases with increasing the number of cycles. 1-way cyclic loading causes the permanent displacement in the same direction as cyclic loading, whereas 2-way cyclic loading causes the permanent displacement in the reverse direction of initial loading. It is also observed that the permanent displacement of piles due to cyclic lateral loads increases with decreasing relative density of soil and with increasing the magnitude of cyclic loads. However, it is insensitive to the earth pressure ratio of soil and embedded pile length. In addition, based on the model pile load test results, equations for estimation of the permanent lateral displacement and rotation angle of piles due to 1-way cyclic lateral loads are proposed.

• Journal of the Korean Geotechnical Society
• /
• v.25 no.2
• /
• pp.45-54
• /
• 2009

The electrical characteristics of soils have been used for investigating soil properties. The purpose of this study is the development and application of the electrical resistivity cone probe (ERCP) for the evelation of the porosity in the field with high precision. The shape of the probe tip is a cone shape to minimize the disturbance during penetration. In addition, the four terminal pair configuration is adopted to minimize the electrical interference. The electrical resistances are continuously measured during penetration of the ERCP using penetration rigs with 0.33 mm/sec penetration rate at Incheon and Busan sites. With the measured resistance profile and electrical resisivity of electrolyte of undisturbed samples, soil porosity profiles are obtained by using Archie's law. The empirical coefficients for the Archie's law are obtained based on the electrolyte extracted from the undisturbed samples. The estimated porosity profiles show similar trends to those of in-situ penetration tests such as SPT, CPT, and DMT. This study suggests that the ERCP may be an effective tool for the porosity estimation in the field with minimum disturbance.

• Industry Promotion Research
• /
• v.8 no.2
• /
• pp.37-43
• /
• 2023

Sampling In this study, we examined the problems and their improvement plans associated with the reliability management sector in quality management engineer test conducted in Korea. First of all, there seems to be a problem in that the terminology is not unified and some techniques essential for reliability analysis are not included. We also looked at quality and reliability tests performed in foreign countries (especially USA) that Koreans often acquire. In particular, it can be seen that the CRE test almost overlaps with the contents of the reliability management engineer test in Korea. However, while the USA is an open book test, Korea is not, so the problem is that there are too many formulas to memorize on the part of the test takers. In addition, the analysis of the data is done manually without using computer software. If the test were an open book test like the CRE test in USA, it will be a test that can go beyond fragmentary knowledge and check whether test takers have the essential elements in reliability management. Lastly, if we adopt re-certification system through education and work within a certain period of time, as in USA, it will be a qualification test suitable for modern people living in a flood of information.

• Korean Journal of Animal Reproduction
• /
• v.9 no.2
• /
• pp.133-139
• /
• 1985

An immunoassay may be defined as an analytical procedure involving the competitive reaction between a limiting concentration of specific antibody and two populations of antigen, one of which is labelled or immobillized. The advent of immunoassay has revolutionised our knowledge of reproductive physiology and the practice of veterinary and clinical medicine. Radioimmunoassay (RIA) was the first of these methods to be developed, which meausred the analyte with good sensitivity, accuracy and precision (1,2). The essential components of RIA are:-(i) a limited concentration of antibodies, (ii) a reference preparation, and (iii) an antigen labelled with a radioisotope (usually tritium or iodine-125). Most procedures invelove isolating the antibody-bound fraction and measuring the amount of labelled antigen. Good facilities are available for scintilltion counting, data reduction nd statistical analysis. RIA is undergoing refinement through:-(i) the introduction of new techniques to separate the antibody-bound and free fractions which minimize the misclassification of labelled antigen into these compartments, and the amount of non-specfic binding. (3), (ii) the development of non-extration for the measurement of haptens (4), (iii) the determination of a, pp.rent free (i.e. non-protein bound) analytes (5), and (iv) the use of monoclonal antibodies(6). In 1968, Miles and Hales introduced in important new type of immunoassay which they termed immunora-diometric assay (IRMA) based on t도 use of isotopically labelled specific antibodies(7) in a move from limited to excess reagent systems. The concept of two-site IRMAs (with a capture antibody on a solid-phase, and a second labelled antibody to a different antigenic determinant of the analyte) has enabled the development of more sensitive and less-time consuming methods for the measurement of protein hormones ovar wide concentration of analyte (8). The increasing use of isotopic methos for diverse a, pp.ications has exposed several problems. For example, the radioactive half-life and radiolysis of the labelled reagent limits assay sensitivity and imposes a time limit on the usefulness of a kit. In addition, the potential health hazards associated with the use and disposal of radioactive cmpounds and the solvents and photofluors necessary for liquid scientillation counting are incompatable with the development of extra-laboratory tests. To date, the most practical alternative labels to radioisotopes, for the measurement of analytes in a concentration > 1 ng/ml, are erythrocytes, polystyrene particiles, gold sols, dyes and enzymes or cofactors with a visual or colorimetric end-point(9). Increased sensitivity to<1 pg/ml may be obtained with fluorescent and chemiluminescent labels, or enzymes with a fluorometric, chemiluminometric or bioluminometric end-point. The sensitivity of any immunoassay or immunometric assay depends on the affinity of the antibody-antigen reaction, the specific activity of the label, the precision with which the reagents are manipulated and the nonspecific background signal (10). The sensitivity of a limited reagent system for the measurement of haptens or proteins is mainly dependent upon the affinity of the antibodies and the smalleest amount of reagent that may be manipulated. Consequently, it is difficult in practice to improve on the sensitivity obtained with iodine-125 as the label. Conversely, with excess reagent systems for the measurement of proteins it is theoretically possible to increase assay sensitivity at least 1000 fold with alternative luminescent labels. To date, a 10-fold improvement has been achieved, and attempts are being made to reduce the influence of other variables on the specific signal from the immunoreaction.

• Journal of Digital Convergence
• /
• v.20 no.1
• /
• pp.25-32
• /
• 2022

The purpose of this study was conducted to develop adult distance literacy education program and verify its effects. The program was developed through the examination on factors affecting online literacy education and necessary analysis and feedback. Pre- and post-tests analyzing the effects of distance literacy education measuring academic understanding factor, learner satisfaction and satisfactory levels on the academic were administered to 49 adult literacy learners before and after a distance literacy education course. Also, this paper try to explore learners who participated in distance literacy education experience, change and that meaning. The results of the content analysis on the program are summarized as follows. First, there were statistically significant differences regarding academic understanding factor, learner satisfaction and perceived learning outcome satisfaction variables since distance literacy education program which is based on ARCS model start. In addition, learners were satisfied with replaying the learning videos several times, and the improved ability to use smart devices. But they expressed regrets about not being able to go to school and the difficulty of using the devices. It means that distance literacy education based on the ARCS model draw a positive learning conclusion. On the basis of these results, suggestions for further research were discussed.

• Journal of the Korea Convergence Society
• /
• v.13 no.1
• /
• pp.399-408
• /
• 2022

The purpose of this study was to compare the usefulness of the lipid ratio indicators for the diagnosis of metabolic syndrome in the elderly aged 65 years or older. From January 2018 to December 2020, 1,464 people aged 65 years or older who underwent a health checkup at a general hospital in Seoul were included. Lipid ratio indicators were measured through blood tests. The prevalence of metabolic syndrome according to the quartiles of the lipid ratio index was confirmed by logistic regression analysis. In addition, the metabolic syndrome predictive ability and cutoff value of the lipid ratio indices were estimated with the receiver operating characteristic(ROC) curve. The correlation between atherogenic index of plasma(AIP) and waist circumference was the highest in both men and women(r=0.278, p<0.001 vs r=0.252, p<0.001). As for the lipid ratio indices, the incidence of metabolic syndrome was higher in the fourth quartile than in the first quartile. The area under the ROC curve(AUC) value of AIP was higher at 0.826(95% CI=0.799-0.850) and 0.852(95% CI=0.820-0.881) for men and women, respectively, compared to other lipid ratio indicators, and the optimal cutoff values for both men and women was 0.44(p<0.001). Therefore, the AIP among the lipid ratio indicators was found to be the most useful index for diagnosing metabolic syndrome in the elderly aged 65 years or older.

• The Journal of the Institute of Internet, Broadcasting and Communication
• /
• v.23 no.3
• /
• pp.27-33
• /
• 2023

Countries around the world are calling for stronger law enforcement to combat the production and distribution of child sexual exploitation images, such as child grooming. Given the scale and importance of this social problem, it requires extensive cooperation between law enforcement, government, industry, and government organizations. In the wake of the Nth Room Case, there have been some amendments to the Enforcement Decree of the Telecommunications Business Act regarding additional telecommunications services provided by precautionary operators in Korea. While Naver and others in Korea use Electronics and Telecommunications Research Institute's own technology to filter illegal images, Microsoft uses its own PhotoDNA technology. Microsoft's PhotoDNA is so good at comparing and identifying illegal images that major global operators such as Twitter are using it to detect and filter images. In order to meet the Korean government's testing standards, Microsoft has conducted more than 16 performance tests on "PhotoDNA for Video 2.0A," which is being applied to the Bing service, in cooperation with the Korea Communications Commission and Telecommunications Technology Association. In this paper, we analyze the cases that did not pass the standards and derive improvement measures related to adding logos. In addition, we propose to use three video datasets for the performance test of filtering against illegal videos.

• KSCE Journal of Civil and Environmental Engineering Research
• /
• v.42 no.2
• /
• pp.181-186
• /
• 2022

Dam slope RIM is a highly important contact interface where the main body and the base surface are connected. In general, when the grouting for the slope of the dam structure is designed, it is planned using limited data (drilling, geological map, etc.). This makes it very difficult to accurately consider the original ground characteristics of the slope RIM grouting target, In addition, when the grouting volume planned during the design is drilled and injected into the original ground where the waterstop is secured, there is a possibility that the original ground with the waterstop is disturbed and the effect of the waterstop is rather diminished. In order to overcome such problems, it is more suitable to first consider geological conditions and determine whether to perform optimal grouting on the original ground through on-site repair tests before performing RIM grouting. In this paper, to determine the grouting of the RIM unit, a pilot hole water pressure test was performed on the rock of the slope in the target section. The analysis shows grouting volume of 1 Lugeon or less, and the cement injection amount also shows the injection result of 1 kg/m or less. In this case, performing grouting is rather counterproductive. This result can be evaluated through a rock of which some degree of order of mass is secured, as it is a dam design standard of 1 Lugeon or less when analyzed, using the results of visual observation and geological map creation during slope cutting. Therefore, in conclusion, it is preferable to make the decision for using RIM grouting on the slope of the dam body structure, based on 1 Lugeon in a rock state, and the cement injection amount also at 1 kg/m.