• 한국수학교육학회지시리즈D:수학교육연구
• /
• 제19권2호
• /
• pp.89-100
• /
• 2015

The study investigated pre-service teachers' knowledge and computational skills by using Triangular Arithmagon. Participants included 90 pre-service teachers from two schools in the United States and Taiwan. The Triangular Arithmagons Test (TAT) was used to measure pre-service teachers' performance in whole number, fractions, and decimals operations (i.e., addition, subtraction, multiplication, and division), each of which included level-1 (basic) and level-2 (advanced) tests. MANOVA analysis was performed to compare the performance between teachers from the United States and Taiwan. Results indicated that overall, pre-service teachers in Taiwan outperformed those in the United States, especially on the advanced-level tests. Pre-service teachers in the United States were found to have poor ability of solving complex operation problems. Different curriculum plans and teaching methods may lead to the performance gap between the two countries.

• 한국소음진동공학회:학술대회논문집
• /
• 한국소음진동공학회 2006년도 추계학술대회논문집
• /
• pp.686-689
• /
• 2006

In a wheel loader, the tail-pipe is installed at the exhaust tube of muffler for the reduction of exhaust noise and the cooling of engine room however, the cabin noise level can be largely increased due to the tail-pipe. In this paper, to grasp and reduce the cabin noise, a series of noise and vibration tests were carried out in addition to numerical simulations. As a result, the transmission path of exhaust noise toward the cabin was exactly identified and the improved shape of tail pipe, that can reduce the cabin noise, was derived through various numerical simulations and real tests.

• 한국철도학회논문집
• /
• 제8권4호
• /
• pp.299-307
• /
• 2005

In general, structural integrity of rolling stock structures should last more than 25 years. During the lifetime corrosive degradation occurs. For structural design and diagnosis, quantitative relationship between corrosive degradation and variation of mechanical properties such as tensile strength and fatigue strength is needed. In this study, first of all we established the atmospheric corrosion test procedure. At regular intervals using specimens of SM490A and SS400 on the atmospheric corrosion test bed, we carried out tensile and fatigue tests. The fatigue strength decreases as the atmospheric corrosion period increases. In addition we studied the effect of post-weld heat treatment on the tensile and fatigue behaviour and performed electrochemical corrosion tests.

• 한국도로학회논문집
• /
• 제18권5호
• /
• pp.11-19
• /
• 2016

PURPOSES : This study identifies the causes and the mechanism of the occurrence of underground cavities. METHODS : A case study on cave-in and a series of model tests with a small soil chamber were conducted. RESULTS : A hypothesis about the mechanism of the cave-in in road was established, and the basic influencing factors on underground cavity expansion were identified. CONCLUSIONS : It was found that the characteristics of shear strength of soil and direction of water flow had a larger influence on cavity formation and expansion than the characteristics of internal erosion. In addition, large cavities suddenly expanded when cavities were caused owing to breakage of buried sewer pipe.

• 대한기계학회:학술대회논문집
• /
• 대한기계학회 2007년도 춘계학술대회A
• /
• pp.1243-1248
• /
• 2007

In recent, rapid manufacturing (RM) technology is widely used to develop an injection mould with a high performance. The objective of this paper is to develop the injection mould with a high productivity using a hybrid RM technology combining Laser-aided Direct Metal Tooling process with a machining process. The geometry decomposition has been utilized to improve the speed of the manufacturing for the mould. Mould with conformal cooling channels has been designed to improve cooling characteristics. Several experiments have been carried out to evaluate characteristics of the mould manufactured from the hybrid RM technology. In addition, injection molding tests have been performed to examine the performance of the manufactured mould. The results of the injection molding tests have been shown that a cooling time and the injection time of the designed mould are reduced to one-fifth and one-second that of the mould with convention cooling channels.

• 한국소음진동공학회논문집
• /
• 제16권12호
• /
• pp.1238-1243
• /
• 2006

In a wheel loader, the tail-pipe is installed at the exhaust tube of muffler for the reduction of exhaust noise and the cooling of engine room, however, the cabin noise level can be largely increased due to the tail-pipe. In this paper, to grasp and reduce the cabin noise, a series of noise and vibration tests were carried out in addition to numerical simulations. As a result, the transmission path of exhaust noise toward the cabin was exactly identified and the improved shape of tail pipe, that can reduce the cabin noise, was derived through various numerical simulations and real tests.

• Journal of Plant Biology
• /
• 제28권3호
• /
• pp.207-216
• /
• 1985

Radial immunodiffusion, rocket immunoelectrophoresis, and Boyden procedure have been employed as quantitative analysis of pollen proteins in a systematic investigation of selected amentiferous plant taxa. Data presented here are continued and supplementary to the previous qualitative analysis of immunoprecipitin systems for the same purpose. Although the number of taxa tested has been limited, the serological evidence indicates that the Betulaceae has the greatest similarity to the Fagaceae, next to the Juglandaceae, the least to the Salicaceae, when antisera against Alnus hirsuta and Betula platyphylla var. japonica were used for tests. Within the Betulaceae Alnus and Betula show greatly similar affinities together, but less similar to the rest of genera: Carpinus, Carya and Corylus. When antisera against Quercus aliena, Q. dentata, and Q. glauca were used for tests, the following decreasing order to serological affinities was obtained: Quercus Alnus, Betula Carpinus, Carya, Corylus Juglans, Pterocarya Populus. Overall serological data come closer to supportint the classification systems of Cronquist, Takhtajan, and Hutchinson; but less of Thorne and Bessey. In addition this investigation indicated that pollen, with its high protein content, provided an excellent source of extractable antigens for serosystematic researches.

• 한국지반공학회지:지반
• /
• 제3권2호
• /
• pp.41-54
• /
• 1987

Although natural soil deposits hat.e been consolidated under Ko-stress system, the soil behavior has been predicted in laboratory from the results of tests performed on specimens consolidated under an isotropic stress s).stem. A series of undrained triaxial compression tests are performed on remolded specimens of clay consolidated under both types of stress systems, and the results at.e compared. One dimensional consolidation history induces anisotropy in clalrs, which is called as the stress induced anisotropy. However, if the clays would be reconsolidated under isotropic stress system. the anisotropy of undrained stress비h would be decreased with decrease of overconsolidation ratio. Undrained shear strength of norma]Iy consolidated clay depends on consolidation methods. Both the Rutledge hypothesis and the study of Henkel and Sowa do not agree with the test results obtained in this paper. In addition, a new theory is explained about the relationships between consolidation stresses, water contents and undiained shear strength.

• International Journal of Fluid Machinery and Systems
• /
• 제4권2호
• /
• pp.229-234
• /
• 2011

For Lift-type Vertical Axis Wind Turbine (VAWT), it is difficult to evaluate the performance through the scale-model wind tunnel tests, because of the scale effect relating to Reynolds number. However, it is beneficial to figure out the critical value of Reynolds number or minimum size of the Lift-type VAWT, when designing this type of micro wind turbine. Therefore, in this study, the performance of several scale-models of Lift-type VAWT (Reynolds number : $1.5{\times}10^4$ to $4.6{\times}10^4$) was investigated. As a result, the Reynolds number effect depends on the blade chord rather than the inlet velocity. In addition, there was a transition point of the Reynolds number to change the dominant driving force from Drag to Lift.

• Journal of the Korean Data and Information Science Society
• /
• 제18권4호
• /
• pp.1005-1021
• /
• 2007

Traditional procedures for DNA microarray data analysis are to preprocess and normalize the gene expression data, and then to analyze the normalized data using statistical tests. Drawbacks of the traditional methods are: genuine biological signal may be unwillingly eliminated together with artifacts, the limited number of arrays per gene make statistical tests difficult to use the normality assumption or nonparametric method, and genes are tested independently without consideration of interrelationships among genes. A novel method using average rank in each array is proposed to eliminate such drawbacks. This average rank method monitors differentially regulated genes among genetically different groups and the selected genes are somewhat different from those selected by traditional P-value method. Addition of genes selected by the average rank method to the traditional method will provide better understanding of genetic differences of groups.