• Animal Bioscience
• /
• 제35권7호
• /
• pp.1100-1108
• /
• 2022

Objective: The objective of this study was to evaluate the effect of waste cooking oil (WCO) addition on ammonia (NH₃) emissions during the composting of dairy cattle manure under two aeration conditions. Methods: The composting tests were conducted using the laboratory-scale composting apparatuses (14 L of inner volume). Three composting treatments (Control, WCO1.5, and WCO3, with WCO added at 0 wt%, 1.5 wt%, and 3 wt% of manure, respectively) were performed in two composting tests: aeration rate during composting was changed from 0.55 to 0.45 L/min in Test 1, and fixed at 0.3 L/min in Test 2, respectively. The NH₃ emitted and nitrogen losses during the composting were analyzed, and the effect of the addition of WCO on NH₃ emissions were evaluated. Results: Both tests indicated that the composting mixture temperature increased while the weight and water content decreased with increasing WCO content of the composting mixtures. On the other hand, the NH₃ emissions and nitrogen loss trends observed during composting in Tests 1 and 2 were different from each other. In Test 1, NH₃ emissions and nitrogen losses during composting increased with increasing WCO contents of the composting samples. Conversely, in Test 2, they decreased as the WCO contents of the samples increased. Conclusion: The WCO addition showed different effect on NH₃ emissions during composting under two aeration conditions: the increase in WCO addition ratio increased the emissions under the higher aeration rate in Test 1, and it decreased the emissions under the lower aeration rate in Test 2. To obtain reduction of NH₃ emissions by adding WCO with the addition ratio ≤3 wt% of the manure, aeration should be considered.

• 한국산업융합학회 논문집
• /
• 제24권4_2호
• /
• pp.435-441
• /
• 2021

This research was performed to study the effect of the Ni + Mo addition on the fatigue properties in 12Cr steel. After heat treatment of 12Cr steel and 12Cr-Ni-Mo steel, tensile tests, impact tests, hardness tests, and rotary bending fatigue tests were performed, respectively. The fatigue fracture surface was observed and analyzed using SEM and EDS. The fatigue limit of 12Cr steel was 554 MPa, which was 49 MPa higher than 505 MPa of 12Cr-Ni-Mo steel. Striations, which are the shape of the typical fatigue fracture surface, were observed at the fracture surface near the starting point of fatigue fracture in the 12Cr steel and 12Cr-Ni-Mo steel. However, unlike the case of 12Cr steel, 12Cr-Ni-Mo steel also had a mixed fracture surface with the fatigue and the ductile fracture surface. When brittle non-metallic inclusions exist near the starting point of fatigue failure, the crack propagation was further promoted and the fatigue life was drastically reduced.

• Geomechanics and Engineering
• /
• 제12권1호
• /
• pp.85-109
• /
• 2017

The paper presents the laboratory study of clayey soil stabilized with Pond ash (PA), Rice husk ash (RHA), cement and their combination used as stabilizers to develop and evaluate the performance of clayey soil. The effect of stabilizer types and dosage on fresh and mechanical properties is evaluated through compaction tests, unconfined compressive strength tests (UCS) and Split tensile strength tests (STS) performed on raw and stabilized soil. In addition SEM (scanning electron microscopy) and XRD (X-ray diffraction) tests were carried out on certain samples in order to study the surface morphological characteristics and hydraulic compounds, which were formed. Specimens were cured for 7, 14 and 28 days after which they were tested for unconfined compression tests and split tensile strength tests. The moisture and density curves indicate that addition of RHA and pond ash results in an increase in optimum moisture content (OMC) and decrease in maximum dry density (MDD). The replacement of clay with 40% PA, 10% RHA and 4% cement increased the strength (UCS and STS) of overall mix in comparison to the mixes where PA and RHA were used individually with cement. The improvement of 336% and 303% in UCS and STS respectively has been achieved with reference to clay only. Developed stabilized soil mixtures have shown satisfactory strength and can be used for low-cost construction to build road infrastructures.

• 소성∙가공
• /
• 제32권3호
• /
• pp.114-121
• /
• 2023

During rolling, rolling mill rolls endure wear when shaping metal billets into a desired form, such as bars, plates, and shapes. Such wear affects the lifespan of the rolls and product quality. Therefore, in addition to rigidity, wear performance is a key factor influencing the performance of rolling mill rolls. Conventional methods such as casting and forging have been used to manufacture rolling mill rolls. However, powder alloying methods are increasingly being adopted to enhance wear resistance. These powder manufacturing methods include atomization, canning to shape the powder, hot isostatic pressing to combine the powder alloy with conventional metals, and various wear performance tests on rolls prepared with powder alloys. In this study, numerical simulations and experimental tests were used to develop and elucidate the wear analysis mechanism of rolling mill rolls. The wear characteristics of the rolls under various rolling conditions were analyzed. In addition, experimental tests (wear and surface analysis tests) and wear theory (Archard wear model) were used to evaluate wear. These tests were performed on two different materials in various powder states to evaluate the different aspects of wear resistance. In particular, this study identifies the factors influencing the wear behavior of rolling mill rolls and proposes an analytical approach based on the actual production of products. The developed wear analysis mechanism can serve the future development of rolls with high wear resistance using new materials. Moreover, it can be applied in the mechanical and wear performance testing of new products.

• Structural Engineering and Mechanics
• /
• 제18권4호
• /
• pp.411-428
• /
• 2004

In this study, a newly developed unconditionally stable explicit method is employed to solve momentum equations of motion in performing pseudodynamic tests. Due to the explicitness of each time step this pseudodynamic algorithm can be explicitly implemented, and thus its implementation is simple when compared to an implicit pseudodynamic algorithm. In addition, the unconditional stability might be the most promising property of this algorithm in performing pseudodynamic tests. Furthermore, it can have the improved properties if using momentum equations of motion instead of force equations of motion for the step-by-step integration. These characteristics are thoroughly verified analytically and/or numerically. In addition, actual pseudodynamic tests are performed to confirm the superiority of this pseudodynamic algorithm.

• 한국철도학회논문집
• /
• 제4권2호
• /
• pp.62-70
• /
• 2001

Pure copper, Cu-1.1wt%Cd and ACSR(Aluminum Conductor Steel Reinforced) have been used as catenary materials of the electric railway system. Since these materials may be exposed to the corrosive environments like polluted air, acid rain and sea water, it is important to investigate the corrosion rates in various corrosive environments. The aqueous corrosion characteristics of catenary materials in aerated acid, neutral and alkali solutions were studied by using immersion corrosion tests, electrochemical measurements and analytical techniques. In order to examine corrosion characteristics according to the dissolved oxygen content, pH, chloride ion concentration ion, and the addition of Cd to Cu, a series of tests such as potentiodynamic polarization, a.c impedance spectroscopy and galvanic corrosion tests were carried out with these materials. Results showed that the addition of Cd to Cu and chloride ion in the solution have an adverse effects on the resistance to corrosion. Additionally, Galvanic currents between Al and steel wires of ACSR were confirmed by using ZRA(zero resistance ammeter) method.

• 한국어교육
• /
• 제29권1호
• /
• pp.163-197
• /
• 2018

The present study suggests ways to improve the Korean proficiency screening test through an analysis of WIDA tests. A review of WIDA Screener, WIDA MODEL, and W-APT reveals that each of these three tests consists of four or five tests, corresponding to grade-level clusters. In addition, the WIDA screening tests assess both English for social communication and academic English, according to WIDA's five English Language Development (ELD) standards. Thematic folders of the ELD standards have different ranges of item difficulty, and the WIDA screening tests are adaptive tests. Lastly, the writing tests consist of performance-based tasks, and the rubric is holistic. As suggestions for improvement for Korean screening tests of the KSL curriculum, this study proposes (a) to devise items to assess academic Korean, so as to evaluate students' overall proficiency more accurately, (b) to utilize an adaptive method to screen students' proficiency more efficiently, and (c) to revise the writing tasks and rubric of the current KSL screening tests.

• Advances in Computational Design
• /
• 제8권2호
• /
• pp.113-131
• /
• 2023

The use of fibers has been commonly considered in engineered cementitious composites, but their behavior with coarse aggregate in concrete has not been studied significantly, which is needed to meet structural performance objectives for design, such as ductility. This research analyzes the behavior of fiber-reinforced concrete with coarse aggregate with 0.62%, 1.23%, and 2% PVA (Polyvinyl-alcohol) content, varying the maximum aggregate size. Tensile (direct and indirect) and compressive concrete tests were performed. The PVA fiber addition in coarse aggregate concrete increased the ductility in compression, especially for the fiber with a larger aspect ratio, with a minor impact on strength. In addition, the tensile tests showed that the PVA fiber increased the tensile strength of concrete with coarse aggregate and, more significantly, improved the ductility. A selected mixture was used to build short and slender reinforced concrete beams to assess the behavior of structural members. PVA fiber addition in short beams changed the failure mode from shear to flexure, increasing the deflection capacity. On the other hand, the slender beam tests revealed negligible impact with the use of PVA.

• 한국안전학회지
• /
• 제16권4호
• /
• pp.182-187
• /
• 2001

This paper examines the effects on human reaction time and mental fatigue of changes in the intensity of physical activity. A treadmill-equipped instrument and perception tester were used to attain several levels of physical activity. In this paper, in order to determine the individual levels of physical activity of subjects, Borg-RPE scale, Heart Rate(HR) and Respiratory Quotient(RQ) were used. Also, a reaction test in whole-body activity on treadmill-equipped instrument and an addition test as an indicator of mental fatigue were performed. In the above experiments, the scores obtained in addition test administered before and after Physical activity at each intensity level used. Restricted within the limits of this paper, the results of these tests showed that mental fatigue decreased after physical activity.

• 한국주조공학회지
• /
• 제43권6호
• /
• pp.294-301
• /
• 2023

The effects of Cu on feeding and macro-porosity characteristics were investigated in hypo- (A356 and 319) and hypereutectic (391) aluminum-silicon alloys. T-section and Tatur tests showed that the feeding and macro-porosity characteristics were significantly different between the hypo- and hypereutectic alloys. The hole and the pipe in the T-section and the Tatur casting in hypereutectic alloy showed a rough and irregular shape due to the faceted growth of the primary silicon, while the results of the hypoeutectic alloys exhibited a rather smooth surface. However, the addition of Cu did not strongly affect the macro-feeding behavior. It is known that copper segregates and interferes the feeding process in the last stage of solidification, possibly leading to form more amount of micro shrinkage porosity by the addition of Cu. The macro porosity formation mechanism and feeding properties were discussed upon T-section and Tatur tests together with an alloying addition.