• Korean Journal of Optics and Photonics
• /
• v.31 no.4
• /
• pp.176-182
• /
• 2020

The possibility of replacing the condensing-prism film used in conventional backlight units with a light-guide plate engraved with a submicrometer-periodic diffraction grating was investigated. The optimal period for the diffraction grating was determined through simulation and experiment, and the transmission-mode efficiency of the diffraction grating was calculated in terms of the polar angle and azimuthal angle of the incident light. In addition, the effects of the two methods of optimizing the polar angle and the directional angle were compared by simulation, by suggesting the shape and configuration of the light-guide plate, so that more light could be extracted by diffraction. By using a ray-tracing program, the luminance angular distribution of the light-guide plate engraved with the diffraction grating was calculated and compared to the luminance angular distribution for each actual prototype.

• Journal of Yeungnam Medical Science
• /
• v.2 no.1
• /
• pp.53-57
• /
• 1985

Many pictures must be taken for the presumption of the stereorelation of the cerebral artery, which obtained with ordinary cerebral angiography. And it is very difficult to understand the stereoimage and required many experiences. But it is able to presume the stereorelationship in only brief eye's training without the aid of the stereoscope using the prism. For the stereoview, we need the paired angiograms obtained only straight and tilting the X-ray tube. In practice, with this stereoview in cerebral angiogram, we could know the directions of the aneurysmal neck and fundus with the stereorelationship of the cerebral artery and indeed helps us greatly in operation field. In addition, we might guess the location and stereorelationships of the feeding artery and draining vein in arteriovenous malformation and other vascular tumors and it was great aid in diagnosis and operation. Now we present the methods of the pictures for the stereoview in cerebral angiogram and the methods for eye's training.

• Nuclear Engineering and Technology
• /
• v.45 no.7
• /
• pp.839-846
• /
• 2013

This paper describes a finite element model of the microstructure of dispersion type nuclear fuels, which can be used to determine the effective thermal conductivity of the fuels during irradiation. The model simulates a representative region of the fuel as a prism shaped unit cell made of brick elements. The elements within the unit cell are assigned material properties of either the fuel or the matrix depending on position, in such a way as to represent randomly distributed fuel particles with a size distribution similar to that of the as manufactured fuel. By applying an appropriate heat flux across the unit cell it is possible to determine the effective thermal conductivity of the unit cell as a function of the volume fraction of the fuel particles. The presence of a fuel/matrix interaction layer is simulated by the addition of a third set of material properties that are assigned to the finite elements that surround each fuel particle. In this way the effective thermal conductivity of the material may also be determined as a function of the volume fraction of the interaction layer. Work is on going to add fission gas bubbles in the fuel as a fourth phase to the model.

• Transactions of the Society of Information Storage Systems
• /
• v.9 no.1
• /
• pp.10-16
• /
• 2013

Through the rapid development of LED TV, a large-area edge-lit backlight unit is widely researched in the display industry for enhancing the optical efficiency, luminous uniformity and slim design. In addition, an edge-lit backlight unit includes many optical sheets such as reflection sheet, prism sheet and diffuser sheet. However the function can be replaced by the carefully patterned light guide plate (LGP). Micro patterns which located on the top and bottom surface of light guide plate was designed by ray-tracing optical simulation. The designed patterns improved the light characteristics of LGP, including optical extraction efficiency and intensity distribution uniformity. These results suggest that it is very effective method to design edge-lit LGP with micro-patterns on both sides for large-area display and to reduce the fabrication cost.

• International Journal of Computer Science & Network Security
• /
• v.22 no.7
• /
• pp.85-90
• /
• 2022

In modern conditions of the development of public relations, there is a continuous development of technologies. This not only reflects the convenience of service users, and new technology but also contributes to the emergence of new disputes to protect the rights of stakeholders. Therefore, it is urgent to study the distinctions between the jurisdiction of commercial, civil and administrative courts in resolving IT disputes. The work aims to study the peculiarities of delimitation of the jurisdiction of commercial, civil, and administrative courts through the prism of IT measurement. The research methodology consists of such methods as a historical, comparative-legal, formal-logical, empirical, method of analogy, method of synthesis, method of analysis, and systematic method. Examining the specifics of delimiting the jurisdiction of commercial, civil, and administrative courts through the IT dimension, it was concluded that there is a problem in determining the jurisdiction of the court. In addition, the judicial practice on this issue is quite variable, which negatively affects the predictability of technology in resolving potential disputes. In this regard, the criterion models for distinguishing between commercial, administrative, and civil proceedings according to the legal classification of the parties, as well as the nature of the claim are identified. This separation will contribute to a more accurate application of legal norms and methods of application of administrative norms and reduce the number of cases of improper proceedings.

• Korean Journal of Materials Research
• /
• v.2 no.6
• /
• pp.389-397
• /
• 1992

Workability and aging behavior of Mg-Li-Al alloys hate been investigated with variation of Li and Al contents. It was found that ${\alpha}$(HCP) + ${\beta}$(BCC) two phase structure reveals better workability than ${\alpha}$(HCP) single phase structure. Increase of workability is attributed to the additional slip on pyramidal and prism planes besides the slip on basal plane of HCP Mg. Workability of ${\alpha}$+${\beta}$ two phase structure is improved with increased amount of Al. Among alloys studied in the present study, reduction limit up to 62 % was obtained for Mg-8.08Li-4.26Al. MgL$i_2$Al(${\theta}$) aging precipitation was observed in ${\alpha}$+ ${\beta}$ two phase structure, while it was not in a single phase structure. Result of microhardness reveals peak hardness for ${\alpha}$ +${\beta}$ two phase structure due to $\theta$ precipitate in ${\theta}$ phase. In ${\alpha}$+${\beta}$ two phase Mg-Li-Al alloys, hardness increased with increasing amount of Al. It is believed that addition of Al raised the amount Al partition in u phase and ${\theta}$ precipitation in ${\beta}$ phase.

• Journal of the Korean Solar Energy Society
• /
• v.35 no.6
• /
• pp.51-60
• /
• 2015

In statutes on the promotion of distribution of new and renewable energy, which were revised in 2014, daylight system and fuel cell were added in addition to existing new and renewable energy sources. This study, therefore, aimed at setting up targets for the introduction of daylight system and analyzing the installation rate of new and renewable energy which can be provided by daylight system for the aggressive use of daylight system, thereby deducting the optimal combination ratio with other new and renewable energy sources. The results of the study are as follows. First, when a prism-shaped daylight system was installed to a round indoor gymnasium among domestic indoor gymnasiums, out of a supply obligations allotment rate of 15% of new and renewable energy, the rate of daylight system was basically set at 2.5%. Second, therefore, with daylight system coming first, the lacked supply obligations rate was taken up by solar photovoltaic, solar heat and geothermal heat. In addition, using the KRESS Program, economic, technical, environmental and complexity evaluations for the upper 5% was made, deducting the optimal ratio of the system. The results produced the following optimal combination ratios: solar photovoltaic (83.3%) in economic evaluation, solar heat (8.3%) and geothermal heat (75%) in technical evaluation, solar photovoltaic (83.3%) in environmental evaluation, and solar photovoltaic (83.3%, the same as in economic evaluation) in complexity evaluation.

• Journal of the Korean Recycled Construction Resources Institute
• /
• v.7 no.3
• /
• pp.279-286
• /
• 2019

In this study, an experimental study on the tensile properties of steel fiber-reinforced ultra high strength concrete(UHSC) with a standard compressive strength of 180MPa was performed. Steel fibers with a volume ratio of 1% were mixed to prepare direct tensile strength specimens and prism specimens for the three-point bending test. The fabricated specimens were set up in the middle section of the specimen to induce cracks, and the test was carried out according to each evaluation method. First, the stress-strain curves were analyzed by performing direct tensile strength tests to investigate the behavior characteristics of concrete after cracking. In addition, the load-CMOD curve was obtained through the three-point bending test, and the inverse analysis was performed to evaluate the stress-strain curve. Tensile behavior characteristics of the direct tensile test and the three-point bending test of the indirect test were similar. In addition, the tensile stress-strain curve modeling presented in the SC structural design guidelines was performed, and the comparative analysis of the measured and predicted values was performed. When the material reduction factor of 1.0 was applied, the predicted value was similar to the measured value up to the strain of 0.02, but when the material reduction factor of 0.8 was applied, the predicted value was close to the lower limit of the measured value. In addition, when the strain was greater than 0.02, the predicted value by SC structural design guideline to underestimated the measured value.

• Journal of the Korea Concrete Institute
• /
• v.16 no.3 s.81
• /
• pp.375-382
• /
• 2004

The compressive strength of concrete is used as the most basic and important material Property when reinforced concrete structures are designed. It has become a problem to use this value, however, because the control specimen sizes and shapes are different from every country. In this study, the effect of specimen sizes and shapes on compressive strength of concrete specimens was experimentally investigated based on fracture mechanics. Experiments for the Mode I failure was carried out by using cylinder, cube, and prism specimens. The test results are curve fitted using least square method(LSM) to obtain the new parameters for the modified size effect law(MSEL). The analysis results show that the effect of specimen sizes and shapes on ultimate strength is apparent. In addition, correlations between compressive strengths with size, shape, and casting direction of the specimen are investigated. For cubes and prisms the effect of placing direction on the compressive strength was investigated.

• Asian Pacific Journal of Cancer Prevention
• /
• v.13 no.6
• /
• pp.2791-2794
• /
• 2012

Aims: We conducted a case-control study in a Chinese population to clarify the association between polymorphisms in ERCC1 and XPD and susceptibility and survival of glioma. Methods: A total of 393 cases and 410 controls were selected from March 2007 to December 2011. Genotyping of ERCC1 and XPD was conducted by TaqMan assays using the ABI Prism 7911HT Sequence Detection System. All analyses were performed using the STATA statistical package. Results: Polymorphisms in ERCC1 118C/T, ERCC1 8092C/A and XPD Asp312Asn showed no statistically significant difference between glioma cases and controls. However, individuals with the XPD 751Gln/Gln genotype had an increased risk of developing glioma compared with those with the Lys/Lys genotype (adjusted OR=1.64, 95% CI: 1.06-2.89). The ERCC1 118T/T genotype was associated with significantly higher median survival than the ERCC1 C/C genotype (HR=0.67, 95%CI=0.35-0.96). In addition, individuals with XPD 751Gln/Gln had a lower median survival time than XPD Lys/Lys carriers (HR=0.54, 95%CI=0.37-0.93). Conclusion: In conclusion, we observed that the XPD 751Gln/Gln genotype is associated with glioma susceptibility, and ERCC1 118 T/T and XPD 751Gln/Gln genotypes confer a significantly better prognosis.