• 한국결정학회지
• /
• 제7권2호
• /
• pp.183-190
• /
• 1996

수열법을 이용하여 은(Ag)이 내장된 고온고압용 autoclave에서 KOH를 광화제로 하여 ZnO 단결정을 성장하고, LiOH 및 NH4OH의 첨가에 따른 결정외형의 변화에 대해 고찰하였다. 성장된 단결정은 연한 녹색을 띠고 있었으며 최대크기는 30×30×20mm3였다. KOH 광화제에 1.0-2.0M의 LiOH를 첨가하면 (0001)면의 flaw의 수가 감소하였다. 또한 NH4OH를 첨가한 결과 Vc/Va(c 축의 방향의 성장속도/a축 방향의 성장속도)가 증가함을 확인하였고, 이 방법을 응용하여 판상형의 종자결정 대신 침상형의 종자결정으로도 등방주상(Equant hexagonal prism)형의 ZnO 단결정을 성장할 수 있었다.

• 한국안광학회지
• /
• 제14권1호
• /
• pp.1-7
• /
• 2009

국산 누진가입도렌즈의 품질향상을 위하여, 누진가입도렌즈의 광학적, 기하학적 요소를 측정하고, 국제규격에 따른 품질을 평가하였다. 방법: 국내시장에서 판매되고 있는 국내외 브랜드의 누진가입도렌즈를 대상으로 굴절력, 중심두께, 프리즘 굴절력을 측정하여, 국제규격에 따라 비교, 분석하였다. 결과: 국내 브랜드 제품들이 해외브랜드 제품과 대등한 품질을 보였으나, 국제규격의 허용기준에 미치지 못하는 경우가 있었다. 결론: 누진가입도렌즈는 세심한 주의가 요구되므로, 국산제품이 세계시장에서 더 높은 경쟁력을 가지기 위해서는 보다 엄격한 품질관리가 필수요소인 것으로 생각된다.

• 한국항해항만학회지
• /
• 제38권1호
• /
• pp.45-52
• /
• 2014

프랙탈 이론은 원격센서로부터 취득한 수치표고모델이나 이미지의 복잡성을 계량화하기 위하여 광범위하게 사용되어 왔다. 프랙탈은 컴퓨터 그래픽, 공학, 지질학을 포함한 다양한 분야에서 성공적으로 응용되어 왔지만, 프랙탈 추정자들의 성능은 데이터 샘플링에 따라 달라진다. 본 논문에서는 삼각프리즘법과 새로운 샘플링법을 기반으로 프랙탈 차원을 추정하는 알고리즘을 제안한다. 제안하는 샘플링 방법은 기존의 기하학적 스텝법과 제수 스텝법의 스텝크기 합집합 중 픽셀 활용률이 문턱값(threshold value) 이상인 스텝크기만을 취해 샘플링하며, 이를 통해 픽셀 활용률을 높여 성능을 개선한다. 또한 기존의 추정법들이 $N{\times}N$ 윈도우를 기반으로 하는데 반해 제안된 방법은 $N{\times}M$ 윈도우에 확대 적용할 수 있도록 하였다. 제안한 방법은 프랙탈 수치표고모델, Brodatz의 이미지 DB와 캠퍼스에서 촬영한 이미지에 적용하여 그 효용성을 살핀다.

• 한국재료학회지
• /
• 제11권4호
• /
• pp.278-282
• /
• 2001

사파이어($\alpha$-$Al_2$$O_3$) 단결정에 있어 basal slip (0001)1/3<1120>의 부분전위의 재결합거동을 알아보기 위해 prism plane (1120)의 사파이어 재료를 사용하여 4점 곡강도 시험을 행하였다. 이 굽힘시험은 온도 $1200^{\circ}C$~$1400^{\circ}C$에서 그리고 응력은 90MPa, 120MPa, 150MPa에서 행하여졌다 굽힘시험 동안 basal전위가 이동하기 위해 잠복기가 필요하였다. 실험온도 범위내에서 잠복기의 활성화에너지는 5.6-6.0eV이었으며, 이 잠복기는 자체-상승운동으로 분해된 부분전위들이 재결합하는데 필요한 시간인 것으로 추정되었다. 한편, 이 활성화에너지는 $Al_2$$O_3$에 있어 산소의 자체 확산을 위한 에너지 (대fir 6.3eV)와 거의 일치하였다. 이 결과를 통하여, 두 부분전위들의 재결합은 부분전위사이 적층결함으로 산소 자체확산에 의해 제어되는 것으로 여겨진다.

• 한국태양에너지학회 논문집
• /
• 제35권3호
• /
• pp.27-39
• /
• 2015

Under the goal of analyzing the compulsory supply share of new renewable energy according to the application of a daylighting system to indoor gymnasiums, this study conducted analysis of energy consumption and operation schedule at three indoor gymnasiums in the nation through a survey. The investigator did an Energy Plus simulation on Building A based on the analysis results and analyzed the supply share of new renewable energy in the saving effects of lighting energy according to the application of a daylighting system. As a result, When 92 prism daylighting system were installed in the upper ceiling of a stadium, they were able to meet the criteria for the minimum illumination for official games(Min : 600㏓) and optimum illumination for general games and recreations, thus saving lighting energy during the daytime(09:00~17:00). The resulting saving effects of lighting energy amounted to 44.4% for official games, 57.6% for general games, and 66.7% for recreations. In addition, the daylighting systems had a compulsory supply share of new renewable energy at 2.04% for official games, 2.75% for general games, and 2.62% for recreations, recording an average compulsory supply share of 2.5%.

• 대한기계학회논문집
• /
• 제17권9호
• /
• pp.2286-2293
• /
• 1993

The study presents the development of a cost-effective CAD/CAM system for metal moulds by use of personal computer. In the personal CAD/CAM system named DKSYS, metal moulds are defined by the operations of basic elements such as prism, pyramid and sphere, plane, rotational body, and surface elements including curved surface. The internal expression of shape elements in the computer is based on the wire model, which is a set of cross-sectional curves of the shape elements. With the addition of OMS system to CAD/CAM system the optimum cutting condition can be selected automatically. After programming NC information with the form definition and the optimum cutting condition, the metallic mould can be formed by transferring cutting information to CNC machine through DNC system. Using a computer for the above process, it is possible to increase the productivity and reduce the cost.

• 대한기계학회논문집
• /
• 제13권1호
• /
• pp.59-66
• /
• 1989

본 연구는 이상에서 언급된 경향과 3차원 형상모델링 시스템 개발의 필요성에 따라 1차적으로 직육면체, 원기둥, 삼각기둥을 원형(primitive)으로 하는 모델러를 개발하여 CAD/CAM 시스템 개발의 기초자료를 제공함과 동시에 궁극적으로는 국내중소기업에서의 간단한 설계, 제작 생산분야에 알맞는 PC 수준의 전용 3차원 형상모델링 시스템을 개발할 목적으로 수행되었다.

• Nuclear Engineering and Technology
• /
• 제55권6호
• /
• pp.2172-2194
• /
• 2023

A variational nodal method (VNM) with unstructured-mesh is presented for solving steady-state and dynamic neutron diffusion equations. Orthogonal polynomials are employed for spatial discretization, and the stiffness confinement method (SCM) is implemented for temporal discretization. Coordinate transformation relations are derived to map unstructured triangular nodes to a standard node. Methods for constructing triangular prism space trial functions and identifying unique nodes are elaborated. Additionally, the partitioned matrix (PM) and generalized partitioned matrix (GPM) methods are proposed to accelerate the within-group and power iterations. Neutron diffusion problems with different fuel assembly geometries validate the method. With less than 5 pcm eigenvalue (k_eff) error and 1% relative power error, the accuracy is comparable to reference methods. In addition, a test case based on the kilowatt heat pipe reactor, KRUSTY, is created, simulated, and evaluated to illustrate the method's precision and geometrical flexibility. The Dodds problem with a step transient perturbation proves that the SCM allows for sufficiently accurate power predictions even with a large time-step of approximately 0.1 s. In addition, combining the PM and GPM results in a speedup ratio of 2-3.

• Journal of Gastric Cancer
• /
• 제17권1호
• /
• pp.43-51
• /
• 2017

Purpose: This study aimed to analyze G3BP1 and VEZT expression profiles in patients with gastric cancer, and examine the possible relationship between the expressions of each gene and clinicopathological factors. Materials and Methods: Expression of these genes in formalin-fixed paraffin embedded (FFPE) tissues, collected from 40 patients with gastric cancer and 40 healthy controls, was analyzed. Differences in gene expression among patient and normal samples were identified using the GraphPad Prism 5 software. For the analysis of real-time polymerase chain reaction products, GelQuantNET software was used. Results: Our findings demonstrated that both VEZT and G3BP1 mRNA expression levels were downregulated in gastric cancer samples compared with those in the normal controls. No significant relationship was found between the expression of these genes and gender (P-value, 0.4835 vs. 0.6350), but there were significant changes associated with age (P-value, 0.0004 vs. 0.0001) and stage of disease (P-value, 0.0019 vs. 0.0001). In addition, there was a direct relationship between VEZT gene expression and metastasis (P-value, 0.0462), in contrast to G3BP1 that did not demonstrate any significant correlation (P-value, 0.1833). Conclusions: The results suggest that expression profiling of VEZT and G3BP1 can be used for diagnosis of gastric cancer, and specifically, VEZT gene could be considered as a biomarker for the detection of gastric cancer progression.

• Wind and Structures
• /
• 제21권2호
• /
• pp.183-202
• /
• 2015

Experiments on two-dimensional rectangular prisms with various side ratios (B/D=2, 3, and 4, where B is the along-wind dimension, and D is the across-wind dimension) and rounded corners (R/D=0%, 5%, 10%, and 15%, where R is the corner radius) are reported in this study. The tests were conducted in low-turbulence uniform flow to measure the wind pressures on the surfaces of 12 models for Reynolds numbers ranging from $1.1{\times}10^5$ to $6.8{\times}10^5$. The aerodynamic force coefficients were obtained by integrating the wind pressure coefficients around the model surface. Experimental results of wind pressure distributions, aerodynamic force coefficients, and Strouhal numbers are presented for the 12 models. The mechanisms of the Reynolds number effects are revealed by analyzing the variations of wind pressure distributions. The sensitivity of aerodynamic behavior to the Reynolds number increases with increasing side ratio or rounded corner ratio for rectangular prisms. In addition, the variations of the mean pressure distributions and the pressure correlations on the side surfaces of rectangular prisms with the rounded corner ratio are analyzed at $Re=3.4{\times}10^5$.