• Proceedings of the IEEK Conference
• /
• 1999.06a
• /
• pp.597-600
• /
• 1999

TMN5 used to test the performance of H.263 is a DCT-based H.263 which DCT is used as transform coding, but DWT is used instead of DCT and adaptive quantizer of being appropriate to DWT is designed in this paper while the structure of TMN5 is maintained. DWT-based H.263, which is proposed in this paper, is excellent in transplantation of the existing system and can improve frame rate by transmitting more Frame. Also, the average PSNR, objective quality of image, has been lost at degree of average 0.35㏈ in luminance signals, but has been improved over a average of 2㏈ in chrominance signals. Subjective quality of image has been improved as blocking effect, which has seriously occurred in DCT based H.263, is diminished. DWT-based H.263 can. therefore. advance video quality of image comparing with the existing ways.

• Proceedings of the KIEE Conference
• /
• 1999.07g
• /
• pp.3246-3248
• /
• 1999

The APC is a coding algorithm which has the middle property of both Wave Coding(ex ADPCM) and Vocoding(ex CELP) and can decode a proper quality of sound by using scalar quantizer instead of vector quantizer at computation a low calculation. So, the APC required for Voice Codec of INMARSAT-B could be successfully implemented by full duplex using TMS32OC30(DSP).

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.18 no.10
• /
• pp.1546-1552
• /
• 1993

We proposed an adaptive block truncation coding(BTC) using gradient and a new initial value. We used gradient of sobel operator as a new category classification coefficient to reduce Jagged appearance at edge part. We defined a new initial value to reduce large quantization error in the 4-level quantizer block including edge part. By computer simulations, we showed that the proposed method less computation load, reduced jagged appearance at edge part, also improved PSNR more than the conventional adaptive BTC.

• Journal of the Korean Institute of Telematics and Electronics S
• /
• v.36S no.11
• /
• pp.112-119
• /
• 1999

TMN5 has been used to evaluate the performance of H.263, the ITU-T/LBC standard of moving picture coding. As DCT is used as transform coding methods in TMN5, blocking effect exists seriously in reconstruction picture at low bit rate. In this pater, DWT is substituted for DCT and adaptive quantizer is designed while the structure of TMN5 is maintained to be excellent in the transplantation of conventional system. It has shown that average PSNR is reduced by 0.35dB in luminance but increased by 2dB in chrominance comparing with that of TMN5. As block effect is reduced in reconstruction picture, the subjective picture quality is better than that of TMN5. Picture drop is, also, reduced because much more frames are transmitted at same bit rate.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.25 no.1B
• /
• pp.77-88
• /
• 2000

This paper presents an approach for rate control by adaptively selecting macroblock modes in video coding.The problem of rate control has been investigated by many authors where quantizer level is adjustedbased on the buffer fullness. The proposed approach is different fron the previous ones [4] id that it finds the optimal decision curve rather than finding a set of the modes. Proposed algorithm extends the coding decision options for rate control to motion/no-motion compensation as well as inter/intra decisions. Instead of having a fixed motion/no-notion compensation or inter/intra decision curve, one can utilize an adaptive decision curvebased on the characteristics of input frames so that the PSNR at a given bit rate is maximized. Therefore, the proposed approach provides better rate control than simple quantizer feedback approach interns of visual quality. The curve is obtained by utilizing simulated annealing optimization technique. Thealgorithm is implemented and simulations are compared with other approaches within H.261 video codec.

• ETRI Journal
• /
• v.38 no.3
• /
• pp.463-468
• /
• 2016

With the constant increase in network traffic, wireless operators are finding it more challenging to keep network hardware costs to a minimum. At the same time, the energy cost associated with operating a network has increased proportionally. Therefore, the search for higher network capacity is simultaneously accompanied by the search for a cost-efficient network deployment. In this paper, we show that a saving in transmitted signal energy can be achieved at the signal design level by deploying very specific signal processing techniques. Using an orthogonal frequency-division multiplexing signal for Long-Term Evolution networks as an example, we utilize a novel non-uniform companding quantizer to save a transmitted signal energy. Our results show that by using non-uniform quantization it is possible to further optimize 4G wireless networks.

• Journal of the Korean Institute of Telematics and Electronics B
• /
• v.28B no.11
• /
• pp.852-858
• /
• 1991

An adaptive hierarchical classifier(AHCL) for Korean character recognition using a neural net is designed. This classifier has two neural nets: USACL (Unsupervised Adaptive Classifier) and SACL (Supervised Adaptive Classifier). USACL has the input layer and the output layer. The input layer and the output layer are fully connected. The nodes in the output layer are generated by the unsupervised and nearest neighbor learning rule during learning. SACL has the input layer, the hidden layer and the output layer. The input layer and the hidden layer arefully connected, and the hidden layer and the output layer are partially connected. The nodes in the SACL are generated by the supervised and nearest neighbor learning rule during learning. USACL has pre-attentive effect, which perform partial search instead of full search during SACL classification to enhance processing speed. The input of USACL and SACL is a directional edge feature with a directional receptive field. In order to test the performance of the AHCL, various multi-font printed Hangul characters are used in learning and testing, and its processing its speed and and classification rate are compared with the conventional LVQ(Learning Vector Quantizer) which has the nearest neighbor learning rule.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.18 no.12
• /
• pp.1806-1814
• /
• 1993

Efficient speech coders using tree coding combined with harmonic scaling are designed at the rate of 4.8 kilobitts/sec (kbps). A time domain harmonic scaling algorithm (TDHS) is used to compress input speech by a factor of two. This process allows the tree coder have 1.5 bits/sample for 4.8 kbps in the case of a 6.4 kHz sampling rate. In the backward adaptive tree coder, there are three components of the code generator, including a hybrid adaptive quantizer, a short-term predictor and a pitch predictor. The robustness of the tree coder is achieved by carefully choosing the input of the short term predictor adaptation. Also, inclusion of a smoother in the pitch predictor improves the error performance of tree coder in the noisy channel. Subjectively, tree coding combined with TDHS provides good quality speech at 4.8 kbps.

• The Journal of the Acoustical Society of Korea
• /
• v.22 no.4
• /
• pp.293-298
• /
• 2003

In this paper. we propose a fast search algorithm for nearest neighbor vector quantization (NNVQ). The proposed algorithm rejects those codewords which can not be the nearest codeword and reduces the search range of codebook. Hence it reduces computational time and complexity in encoding process, while it provides the same SD performance as the conventional full search algorithm. We apply the proposed algorithm to the adaptive multi-rate (AMR) speech coder and a general vector quantizer designed by LBG. algorithm. Simulation results show effectiveness of the proposed algorithm.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.21 no.8
• /
• pp.1928-1936
• /
• 1996

In this paper, we propose an adaptive bandwidth allocation algorithm for the transmission of VBR video through ATM Networks. In order to evaluate the required bandwidth for the VBR video, the characteristics of the compressed VBR video generated by the two-layered coder are analyzed with variations in the number of GOP(N), quantizer scale(q), and the number of low-frequency DCT coefficients(.betha.). The two-layer coder which is used to separate from the number of DCT coefficients is designed to transmit the VBR video efficiently. The compressed data generated by the two-layer coder are splitted into the high priority and low priority cells. If congestion is occurred in ATM networks, the minimum image quality is maintained by the high priority cells. The required bandwidth for VBR video is estimated with a prediction algorithm using the scene anframe correlations as well as the statistical properties of the VBR video sources. Strong correlation among the adjacent slices in a frame represents by the scene correlation andstrong correlation among the frames is represented by the frame correlation. The performance of the bandwidth allocation scheme proposed is evaluated in terms of the bandwith utilization, cell loss rate, and SNR with variations in q, n, .betha.. Simulation rewsults shown that the proposed scheme is superior to the conventional methods.