• Journal of Korea Multimedia Society
• /
• v.12 no.3
• /
• pp.329-334
• /
• 2009

When an optical disc is being played. the pick-up converts light to analog signal at first. The analog signal is equalized for removing the inter-symbol interference and then the equalized analog signal is converted into the digital signal for extracting the synchronized data and clock signals. There are a lot of algorithms that minimize the BER in extracting the synchronized data and clock when high. density optical disc like BD is being played in low speed. But if the high-density optical disc is played in high speed, it is difficult to adopt the same extraction algorithm to data PLL and PRML architecture used in low speed application. It is because the signal with more than 800MHz should be processed in those architectures. Generally, in the 0.13-${\mu}m$ CMOS technology, it is necessary to have the high speed analog cores and lots of efforts to layout. In this paper, the parallel data PLL and PRML architecture, which enable to process in BD 8x speed of the maximum speed of the high-density optical disc as the extracting data and clock circuit, is proposed. Test results show that the proposed architecture is well operated without processing error at BD 8x speed.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.21 no.6
• /
• pp.1490-1500
• /
• 1996

One of the important issues for multimedia communications over ATM netowrks is efficient use of net-work resources since transmitting video at low cost requires high utilization of channel bandwidth. In this paper, we propose an effective bandwidth estimation scheme for MPEG sources in ATM networks. It has been known difficult to allocate effective transmission bandwidth to MPEG sources due to its bursty charactersitics. The MPEG traffic stream can bemodeled using five traffic parameters:service rate, burst load ratio, interburst load ratio, burst period, and interburst period. Using these parameters, a transmission bandwidth for each source can be estimated, and the estimated bandwidth is applied synchronously to reduce the queue size in a buffer. For a simple network modelof a high speed link that multiplexes a number of virtual-circuit connections, simulations on adaptive bandwidth allocation were performed, and the results show that the queueing delay is significantly reduced, when compared to a fixed bandwidth allocation.

• The Journal of Korean Institute of Electromagnetic Engineering and Science
• /
• v.18 no.2 s.117
• /
• pp.177-182
• /
• 2007

This paper presents the InGaP/GaAs HBT differential LC VCO with low phase noise performance for adaptive feedback interference cancellation system(AF-lCS). The VCO is verified with enhanced tank structure including filtering technique. The output tuning range for proposed VCO using asymmetric inductor and symmetric capacitors withlow pass filtering technique is 207 MHz. The output powers are -6.68 including balun and cable loss. The phase noise of this VCO at 10 kHz, 100 kHz and 1 MHz are -102.02 dBc/Hz, -112.04 dBc/Hz and -130.40 dBc/Hz. The VCO is designed within total size of $0.9{\times}0.9mm^2$.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.32 no.6A
• /
• pp.558-564
• /
• 2007

3G Long Term Evolution, which aims for various mobile multimedia service provision by enhanced wireless interface, proposes VoIP-based voice service through a Packet Switching (PS) domain. As delay and loss-sensitive VoIP traffic flows through the PS domain, more challenging technical difficulties are expected than in Circuit Switching (CS) domain based VoIP services. Moreover, since 3G LTE, which adopts the OFDM as its physical layer, introduces Physical Resource Block (PRB) as a unit for transmission resources, new types of resource management schemes are needed. This paper proposes a PRB scheduling algorithm of MAC layer for VoIP service in 3G LTE and shows the simulation results. The proposed algorithm has two key parts; dynamic activation of VoIP priority mode to satisfy VoIP QoS requirements and adaptive adjustment of the priority mode duration in order to minimize the degradation of resource utilization.

• Ecology and Resilient Infrastructure
• /
• v.3 no.3
• /
• pp.169-176
• /
• 2016

Roads are widely accepted to be as a major cause of habitat fragmentation. The wildlife road-crossing structure is one of the most acceptable alternatives among the solutions to provide connectivity between patches isolated by roads. We investigated noise disturbance, vegetation structure and wildlife crossing and habitation at a wildlife road-crossing structure located at the Jingmaei-Pass in Incheon, Korea, to monitor and evaluate its conservation value and ecological performance and to propose measures for their adaptive management. From the result of noise measurement, the noise disturbance from the road traffic was not properly blocked out at the wildlife crossing structure. The survey results of vegetation structure showed that the early-successional plant species such as Ambrosia trifida, Erigeron annuus, Pueraria lobata, Rosa multiflora invaded widely on the crossing structure. An efficient management of the vegetation should be necessarily considered for the facilitation of vegetation succession and the improvement of animal habitat. The crossing structure was used by limited mammal species: Apodemus agrarius, Nyctereutes procyonoides, Mogera wogura and Sciurus vulgaris coreae as the results of the monitoring using footprints and closed-circuit television. In conclusion, The Jingmaei-Pass wildlife crossing structure is unable to function properly as a biological corridor because of the interference of noise and flourishing disturbed vegetation. Therefore, proper alternatives are required for improving animal habitats and mobile environments to enhance the ecological function of a wildlife corridor.