• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.21 no.6
• /
• pp.1490-1500
• /
• 1996

One of the important issues for multimedia communications over ATM netowrks is efficient use of net-work resources since transmitting video at low cost requires high utilization of channel bandwidth. In this paper, we propose an effective bandwidth estimation scheme for MPEG sources in ATM networks. It has been known difficult to allocate effective transmission bandwidth to MPEG sources due to its bursty charactersitics. The MPEG traffic stream can bemodeled using five traffic parameters:service rate, burst load ratio, interburst load ratio, burst period, and interburst period. Using these parameters, a transmission bandwidth for each source can be estimated, and the estimated bandwidth is applied synchronously to reduce the queue size in a buffer. For a simple network modelof a high speed link that multiplexes a number of virtual-circuit connections, simulations on adaptive bandwidth allocation were performed, and the results show that the queueing delay is significantly reduced, when compared to a fixed bandwidth allocation.

• Journal of KIISE
• /
• v.42 no.9
• /
• pp.1162-1174
• /
• 2015

These days, the networks have exhibited HBDP (High Bandwidth Delay Product) characteristics. The legacy TCP slowly increases the size of the congestion window and drastically decreases the size of a congestion window. The legacy TCP has been found to be unsuitable for HBDP networks. TCP mechanisms for solving the problems of the legacy TCP can be categorized into the loss-based TCP and the delay-based TCP. Most of the TCP mechanisms use the standard slow start phase, which leads to a heavy packet loss event caused by the overshoot. Also, in the case of congestion avoidance, the loss-based TCP has shown problems of wastage in terms of the bandwidth and RTT (Round Trip Time) fairness. The delay-based TCP has shown a slow increase in speed and low occupancy of the bandwidth. In this paper, we propose a new scheme for improving the over shoot, increasing the speed of the bandwidth and overcoming the bandwidth occupancy and RTT fairness issues. By monitoring the buffer condition in the bottleneck link, the proposed scheme does congestion control and solves problems of slow start and congestion avoidance. By evaluating performance, we prove that our proposed scheme offers better performance in HBDP networks compared to the previous TCP mechanisms.

• The KIPS Transactions:PartC
• /
• v.13C no.2 s.105
• /
• pp.185-194
• /
• 2006

In this paper, we first propose a power-and-bandwidth efficient cooperative transmission protocol where a sensor node assists two others for their data transmission to a clusterhead in WSNs (Wireless Sensor Networks) using LEACH (Low-Energy Adaptive Clustering Hierarchy). Then we derive its closed-form BER expression which Is also a general BER one for the decode-and-forward protocol (DF) and Prove that the proposed protocol performs as same as the conventional DF but obtains higher spectral efficiency. A variety of numerical results reveal the cooperation can save the network power up to 11dB over direct transmission at BER of $10^{-3}$.

• JSTS:Journal of Semiconductor Technology and Science
• /
• v.6 no.4
• /
• pp.264-269
• /
• 2006

A $0.12GHz{\sim}1.4GHz$ DLL-based clock generator with the capability of multiplied four phase clock generation was designed using a 0.18um CMOS process. An adaptive bandwidth DLL with a regulated supply delay line was used for a multiphase clock generation and a low jitter. An extra phase detector (PD) in a reference DLL solves the problem of the initial VCDL delay and achieves a fast lock time. Twice multiplied four phase clocks were generated at the outputs of four edge combiners, where the timing alignment was achieved using a coarse lock signal and the 10 multiphase clocks with T/8 time difference. Those four clocks were combined one more time using a static XOR circuit. Therefore the four times multiplication was achieved. With a 1.8V supply, the rms jitter of 2.1ps and the peak-to-peak jitter of 14.4ps were measured at 1.25GHz output. The operating range is $0.12GHz{\sim}1.4GHz$. It consumes 57mW and occupies 450*325um2 of die area.

• Proceedings of the IEEK Conference
• /
• summer
• /
• pp.147-151
• /
• 2004

QoS is a subject of high interest for successful deployment of various services in a home gateway and the gateway is possible to support QoS by installing existing queuing disciplines, which control the outgoing traffic to guarantee only QoS of the traffic. But m the home gateway it is also important to guarantee QoS of the incoming traffic. This paper proposes an adaptive control of the traffic to guarantee QoS of incoming traffic into the home gateway. In the proposed method, the upper limit of the available bandwidth of sending rate varies with receiving rate. And the proposed method makes the gap between the allocated rate and the actual service rate of the traffic narrow. Some experiments on a test bed show that the proposed method is valid.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.23 no.8
• /
• pp.1907-1914
• /
• 1998

This paper proposes the adaptive connection admission cotrol using the variale MRR(measurement reflection ratio) and the distribution of the number of cells arriving during the fixed interval. This distribution is estimated from the measured number of cells arriving at the output buffer during the fixed interval and traffic parameters specified by user. MRR is varied by the difference of estimated distribution and measurement distribution. As MRR is adaptively varied by estimated distribution error of accepted connections, it quickly reduces estimation error. Also, the scheduling scheme is proposed for multiplexed traffic with various traffic characteristics. For each traffic class, this scheme estimates adaptively equivalent bandwidth and schedules according to equivalent bandwidth ratio of each traffic class, so it improves cell loss rate and link utilization.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.25 no.10A
• /
• pp.1473-1479
• /
• 2000

This paper presents the performance evaluation of an adaptive QAM scheme under flat and frequency selective fading channels for indoor wireless communication systems. The QAM modulation is combined with differential encoding and the demodulation process is carried out noncoherently. The adaptation is performed by varying the modulation level of QAM, depending upon received signal strength. The adaptation mechanism allows a 2- or 3-bit increase or decrease at a time, if the channel condition is considered to be significantly good or bad. Simulation results show that the average number of bits per symbol (ABPS) for each symbol block transmitted over a flat fading channel is higher than 5.0 and the BER performance is better than 10^-4 for a SNR value higher than 30 dB. For frequency selective fading channels, an oversampling technique in the receiver was employed. The BER performance obtained for frequency selective fading channels is better than 10^-4 with a SNR value of 40 dB and ABPS is found to be approximately 5.5. Therefore, this scheme is very useful in that it provides both very high bandwidth efficiency and acceptable performance with moderate SNR values over flat and frequency selective fading channels. In addition, this scheme provides reduced receiver complexity by way of noncoherent detection.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.28 no.8B
• /
• pp.691-698
• /
• 2003

Throughput response characteristics depending on the network bandwidth allocation need to be modeled to devise adaptive control mechanism to support QoS of the network. Thus, two models are proposed in this study. The first one is a dynamic system model and the other one is a stochastic model. The dynamic system model is developed to represent dynamic characteristics of the network and the stochastic model is developed to represent distribution of measured throughput data. An optimization technique is used for decision of proposed model's factor. The result confirms that the characteristics of proposed models are similar with actual network's characteristics.

• Journal of Communications and Networks
• /
• v.4 no.3
• /
• pp.221-229
• /
• 2002

Adaptability is the most promising feature to be applied in future robust multimedia applications. In this paper, we propose the Direct Algorithm to improve the degree of satisfaction at heterogeneous receivers in multi-layered multicast video environments. The algorithm relies on a mechanism that dynamically controls the rates of the video layers and is based on feedback control packets sent by the receivers. The algorithm also addresses scalability issues by implementing a merging procedure at intermediate nodes in order to avoid packet implosion at the source in the case of large multicast groups. The proposed scheme is optimized to achieve high global video quality and reduced bandwidth requirements. We also propose the Direct Algorithm with a virtual number of layers. The virtual layering scheme induces intermediate nodes to keep extra states of the multicast session, which reduces the video degradation for all the receivers. The results show that the proposed scheme leads to improved global video quality at heterogeneous receivers with no cost of extra bandwidth.

• Journal of Advanced Navigation Technology
• /
• v.14 no.3
• /
• pp.351-357
• /
• 2010

This paper proposes the adaptive class-E power amplifier with maintaining high power added efficiency (PAE) to apply RFID and wireless communication system. This switch mode amplifier is used a microprocessor to control a resonator circuits and to maintain high efficiency in case of input frequency variation. To validate the adaptive amplifier operation, which is a 450MHz operating frequency and a 100MHz bandwidth, the class E amplifier is implemented. As a result, the adaptive amplifier is maintained above 60% efficiency in frequency range and has a 74.8% maximum efficiency.