• 제어로봇시스템학회:학술대회논문집
• /
• 제어로봇시스템학회 2002년도 ICCAS
• /
• pp.51.4-51
• /
• 2002

$\textbullet$ A noval haptic mouse system is developed for human computer interface. $\textbullet$ Five bar mechanism is adapted for 2 dof force feedback with virtual environment. $\textbullet$ Double prismatic joint type mechanism is adapted to reflect 1 dof grabbing force feedback. $\textbullet$ Cable driven mechansim is used for actuation to reduce backlash and endow backdrivability. $\textbullet$ Virtual wall perception experiment is conducted to obtain force specification for haptic mouse. $\textbullet$ Average mouse workspace is measured using magnetic position tracker.

• 재활복지공학회논문지
• /
• 제11권2호
• /
• pp.165-171
• /
• 2017

고령자 및 장애인의 삶의 질을 높이기 위하여 일상생활동작을 보조하는 경량의 재활보조 시스템이 필요하다. 본 논문에서는 수소저장합금 모듈 3가지를 설계하였고, 열전달 해석을 통하여 수소저장합금 엑츄에이터의 성능을 높일 수 있는 수소저장합금 모듈을 선정하였다. 수소저장합금 엑츄에이터는 열전소자의 열전달을 통하여 수소저장합금 모듈 안에 담겨 있는 수소의 흡수/방출을 통하여 공압 엑츄에이터의 기계적인 동작을 구동시킨다. 수소저장합금 모듈의 열전달의 효과를 검증하기 위하여, 열전소자와 수소저장합금 모듈의 접촉 방식을 선접촉과 면접촉 방식의 3가지 타입으로 3D 모델을 설계하였고, 열전달 해석을 통하여 열전달에 대한 특성을 비교하였다. 그 결과, 열전소자와의 열전달 방식이 선접촉 방식과 비교하여 면접촉 방식의 수소저장합금 모듈이 열전달 특성이 4.4배 좋아지는 것을 확인하였다. 면접촉 방식의 수소저장합금 모듈은 재활보조 시스템의 착용성을 높일 수 있는 수소저장합금 엑츄에이터 개발에 적용될 수 있을 거라 판단된다.

• 대한교통학회지
• /
• 제21권3호
• /
• pp.71-83
• /
• 2003

교차로의 신호시간 계획이나 간선도로 축의 제어에 있어서 가장 대표적인 문제는 수시로 변화하는 교통상황이다. 또한 이러한 변화로 인해 정확한 교통 데이터를 얻기 힘들고, 그에 대한 분석 또한 어렵다. 따라서 본 논문에서는 이러한 불명확한 교통데이터를 이용하여 교차로 및 간선도로의 제어를 하기 위해, 인간의 사고와 유사한 추론이 가능하다고 판단되는 Fuzzy Logic을 적용함으로써 불명확한 상황에 대하여 수학적인 함수로 표현되지는 않지만 언어적인(Linguistic) 제어가 가능하도록 하여, 기존의 교통제어 방법보다 교통상황에 민감하게 대처할 수 있는 새로운 제어전략을 제시하였다. 본 연구는 "영상검지기를 이용한 실시간 교통신호 감응제어(김성호, 1996)"의 독립교차로의 신호 제어 부분을 기초로 하여 간선도로 상의 연속진행 제어에 대한 전략을 제안하고, 그 효과를 기존의 제어 방법에 의한 효과와 비교·분석하였다. 또한 각 제어 방법에 대한 분석을 위하여, 교통 시뮬레이션 소프트웨어인 TRAF-NETSIM을 이용하여 각각의 효과를 비교하였다.

• Journal of Mechanical Science and Technology
• /
• 제17권3호
• /
• pp.357-369
• /
• 2003

Electromagnetic valve (EMV) actuation system is a new technology for improving fuel efficiency and at the same time reducing omissions in internal combustion engines. It can provide more flexibility in valve event control compared with conventional variable valve actuation devices. The electromagnetic valve actuator must be designed by taking the operating conditions and engine geometry limits of the internal combustion engine into account. To help develop a simple design method, this paper presents a procedure for determine the basic design parameters and dimensions of the actuator from the relations of the valve dynamics, electromagnetic circuit and thermal loading condition based on the lumped method. To verify the accuracy of the lumped method analysis, experimental study is also carried out on a prototype actuator. It is found that there is a relatively good agreement between the experimental data and the results of the proposed design procedure. Through the whole speed range, the actuator maintains proper performances in valve timing and event control.

• International Journal of Control, Automation, and Systems
• /
• 제5권4호
• /
• pp.429-435
• /
• 2007

A number of different alternative actuation methods have been under active development for some specific applications where the traditional electromechanical actuators are difficult to apply. Recently, many of these substitutes are trying to employ new smart materials like electroactive polymers. However most of the polymeric materials are flexible and vulnerable so that they normally can not sustain external forces. Although the materials have shown a good potential to be used for alternative actuation mechanisms, no tangible industrial application is yet presented because of the reason. A conceptual design for a rectilinear motion actuator using dielectric elastomer is presented in this article. The introduced design concept might enable to produce fairly controllable rectilinear motions for various applications and the presented prototype actuator system is fully packaged in a small unit and controlled by a standard communication interface.

• Advances in aircraft and spacecraft science
• /
• 제1권3호
• /
• pp.331-351
• /
• 2014

The paper presents the development of numerical models referred to a morphing actuated aileron. The structural solution adopted consists of an internal part made of a composite chiral honeycomb that bears a flexible skin with an adequate combination of flexural stiffness and in-plane compliance. The identification of such structural frame makes possible an investigation of different actuation concepts based on diffused and discrete actuators installed in the skin or in the skin-core connection. An efficient approach is presented for the development of aeroelastic condensed models of the aileron, which are used in sensitivity studies and optimization processes. The aerodynamic performances and the energy required to actuate the morphing surface are evaluated and the definition of a general energetic performance index makes also possible a comparison with a rigid aileron. The results show that the morphing system can exploit the fluid-structure interaction in order to reduce the actuation energy and to attain considerable variations in the lift coefficient of the airfoil.

• 로봇학회논문지
• /
• 제12권2호
• /
• pp.116-123
• /
• 2017

Wearable robots are receiving great attention from the public, as well as researchers, because its motivation is to improve the quality of lives of people. Above all, complete paraplegic patients due to spinal cord injury (SCI) might be the most adequate target users of the wearable robots, because they definitely need physical assistance due to the complete loss of muscular strength and sensory functions. Furthermore, the medical care of complete paraplegics by using the wearable robots have significantly reduced the mortality rate and improved the life expectancy. The requirements of the wearable robot for complete paraplegics are actuation torque, locomotion speed, wearing sensation, robust gait stability, safety, and practicality (i.e., size, volume, weight, and energy efficiency). A WalkON Suit is the wearable robot that has satisfied the requirements of the wearable robot for complete paraplegics and participated in the powered exoskeleton race of Cybathlon 2016. In this paper, configuration of the WalkON Suit, human-machine interface, gait pattern, control algorithm, and evaluation results are introduced.

• 대한의용생체공학회:의공학회지
• /
• 제26권5호
• /
• pp.257-264
• /
• 2005

This paper proposes an ionic polymer metal composite (IPMC) based artificial muscle to be applicable to the Myoelectric hand prosthesis. The IPMC consists of a thin polymer membrane with metal electrodes plated chemically on both faces, and it is widely applying to the artificial muscle because it is driven by relatively low input voltage. The control commands for the IPMC-based artificial muscle is given by electromyographic (EMG) signals obtained from human forearm. By an intended contraction of the human flexor carpi ulnaris and extensor carpi ulnaris muscles, we investigated the actuation behavior of the IPMC-based artificial muscle. To obtain higher actuation force of the IPMC, the single layered as thick as $800[{\mu}m]$ or multi-layered IPMC of which each layer can be as thick as $178[{\mu}m]$ are prepared. As a result, the bending force was up to the maximum 12[gf] from 1[gf] by actuating the single layered IPMC with $178[{\mu}m]$, but the bending displacement was reduced to 6[mm] from 30[mm]. The experimental results using an implemented IPMC control system show a possibility and a usability of the bio-mimetic artificial muscle.

• 한국항공우주학회지
• /
• 제33권12호
• /
• pp.48-53
• /
• 2005

본 논문에서 LIPCA(Lightweight Piezoceramic Composite Actuator)를 이용한 날갯짓(flapping) 기구의 개발에 관한 최근의 연구진척 사항을 제시하였다. 날갯짓 기구는 여러 개의 연결막대를 이용하여 LIPCA의 제한된 작동변위를 커다란 날갯짓 각(flapping angle)이 발생하도록 증폭시켰으며, 패더링 메커니즘(feathering mechanism)을 적용하여 날갯짓과 동시에 날개에 비틀림이 발생하도록 설계되었다. 이 날갯짓 기구의 고유 날갯짓 주파수는 약 9Hz로, 이때 최대의 날갯짓 각이 발생하였다. 제작된 날갯짓 기구의 작동성능을 평가하기 위하여 날갯짓 주파수를 4Hz에서 15Hz까지 변화시키면서 발생되는 양력과 추력을 측정하였으며, 최대 양력과 최대 추력은 고유 날갯짓 주파수 부근에서 계측되었다.

• 대한기계학회논문집A
• /
• 제31권2호
• /
• pp.152-159
• /
• 2007

A study on the control of free vibration and stability characteristics of rotating hollow circular shafts subjected to compressive axial forces is presented in this paper. Both passive structural tailoring technique and active control scheme via collocated piezoelectric sensing and actuation are used in the study Gyroscopic and centrifugal forces combined with the compressive axial force contribute to the occurrence of divergence and flutter instabilities of the rotating shaft. The dual methodology based on the passive and active control schemes shows a high degree of efficiency toward postponement of these instabilities and expansion of the domain of stability of the system. The structural model of the shaft is based on an advanced thin-walled beam structure that includes the non-classical effects of transverse shear, anisotropy of constituent materials and rotatory inertia.