• 제어로봇시스템학회:학술대회논문집
• /
• 제어로봇시스템학회 1996년도 한국자동제어학술회의논문집(국내학술편); 포항공과대학교, 포항; 24-26 Oct. 1996
• /
• pp.535-538
• /
• 1996

This paper presents the kinematic and dynamic analysis of parallel manipulators with actuation redundancy, obtained by replacing the passive joints of an existing parallel manipulator with the active ones. We develop the kinematic and dynamic models of a parallel manipulator with actuation redundancy. The multiplicity in selecting the controllable active joints among the increased number of active joints is considered in the modeling. Based on the derived models, we define the kinematic and dynamic manipulabilities of a parallel manipulator with actuation redundancy. The effect of the actuation, redundancy on the performance of parallel manipulators is analyzed in terms of kinematic and dynamic manipulabilities.

• 제어로봇시스템학회논문지
• /
• 제6권2호
• /
• pp.181-189
• /
• 2000

This paper presents the optimal redundant actuation of parallel manipulators for complicated robotic applications such as cutting grinding drilling and digging that require a high degree of operational stiffness as well as the balance between force applicability and dexterity. First by taking into account the distribution(number and location) of active joints the statics and the operational stiffness of a redundant parallel manipulator are formulated and the effects of actuation redundancy are analyzed, Second for given task requirements including joint torque limit task force maximum allowable disturbance and maximum allowable deflection the task execution conditions of a redundant parallel manipulator are derived and the efficient testing formulas are provided. Third to achieve high operational stiffness while maintaining moderate dexterity the redundant actuation of a parallel manipulator is optimized which determines the optimal distribution of active joints and the optimal internal joint torque, Finally the simulation results for the optimal redundant actuation of a planar parallel manipulator are given.

• 제어로봇시스템학회논문지
• /
• 제15권9호
• /
• pp.887-893
• /
• 2009

In this paper, a mask-panel alignment robot system is considered for IT industry applications. Two kinds of solutions are suggested which are required in constructing a control system for the alignment robot with actuation redundancy. First, the kinematic solution for the 4PPR parallel positioning mechanism is formulated for an arbitrary initial posture, which relates the mask-panel misalignment in the task space and the desired actuator displacements in the joint space. Secondly, in order to increase the stiffness of the control motion and also to avoid the mechanical lock which may happen due to the redundant actuation, a new synchronous control method is proposed which has the merit of coordinating joint control motions while not losing individual joint control performance. In addition, the engineering process to develop a visual alignment robot system is described with the results of experimental setup and GUI software. Finally, the experimental results demonstrate the effectiveness of the proposed alignment system control methodology and how much beneficial it will be in real industrial applications.

• 대한기계학회논문집
• /
• 제19권1호
• /
• pp.181-192
• /
• 1995

In this study, we introduce new types of planar 2 degree-of-freedom robot modules resembling the musculoskeletal structure of the human arm with actuation redundancy. First, for the given actuator sizes the performance analysis for the manipulator with redundant actuation and without redundant actuation is performed with respect to maximum load handling capacity, maximum hand velocity, and maximum hand acceleration. Secondly an algorithm which decides optimal actuator sizes for the given operational performances is introduced, and the optimal actuator sizes for a robot module with four redundant actuation are obtained. The algorithms employed in this paper will be useful to analyze the robot performances and to determine the actuator sizes for general robot manipulators.

• 제어로봇시스템학회논문지
• /
• 제9권6호
• /
• pp.456-465
• /
• 2003

It is well-known that bio-systems does not calculate inverse dynamics for trajectory planning, but they move by proper modulation of system impedances. Inspired by bio-systems, a biomimetic trajectory planning method is proposed in this work. This scheme is based on employment of redundant actuation which prevails in bio-systems. We discuss that for the generation of the biomimetic trajectory, intelligent structure of bio-systems plays an important role. Redundant actuation and kinematic redundancy fall into such a category of intelligent structure. The proposed biomimetic trajectory planning modulates the complete dynamic behavior such as natural frequencies and damping ratios by using the intelligent structure. Experimental work is illustrated to show the effectiveness of the proposed biomimetic trajectory planning for a five-bar mechanism with redundant actuators.

• 제어로봇시스템학회:학술대회논문집
• /
• 제어로봇시스템학회 1996년도 한국자동제어학술회의논문집(국내학술편); 포항공과대학교, 포항; 24-26 Oct. 1996
• /
• pp.730-733
• /
• 1996

This paper presents the kinematic and dynamic analysis of parallel manipulators with redundant limbs, obtained by putting additional limbs to an existing parallel manipulator. We develop the kinematic and dynamic models of a parallel, manipulator with redundant limbs. The redundancy in parallelism due to the increased number of limbs and the redundancy in actuation due to the increased number of active joints are considered in the modeling. Based on the derived models, we define the kinematic and dynamic manipulabilities of a parallel manipulator with redundant limbs. The effect of the redundant limbs on the performance of parallel manipulators is analyzed in terms of kinematic and dynamic manipulabilities.

• 한국정밀공학회:학술대회논문집
• /
• 한국정밀공학회 2011년도 춘계학술대회 논문집
• /
• pp.277-278
• /
• 2011

• 한국항공우주학회지
• /
• 제34권3호
• /
• pp.74-80
• /
• 2006

본 논문은 선형 전기모터가 유압밸브 스풀(valve spool)을 직접 움직이는 직접구동밸브 (DDV: direct drive valve) 방식 유압서보 엑츄에이터의 제어 및 고장 모니터링에 관한 것이다. 유압서보 구동장치는 밸브 스풀을 통한 유량 흐름 특성으로 인하여 비선형 운동 특성을 갖게 된다. DDV 구동장치에 관한 비선형 운동 모델을 제시하고, 이를 선형화 시켜 DDV 구동장치의 제어계 및 고장 감지계 설계에 유용하게 사용될 수 있는 단순화된 선형 모델을 제시하였다. 한편, 조종면 구동 엑츄에이터가 만족시켜야 하는 성능 그리고 안전 작동에 관한 요구조건에 대하여 논의한 후, 이를 만족시키기 위한 제어계 및 고장 감지계의 구조에 대한 논의를 한다. 3중의 다중화 구조를 갖는 유압 DDV 구동장치의 운동 특성을 해석할 수 있는 수치해석 모델이 개발되었다.

• 한국항공우주학회지
• /
• 제34권3호
• /
• pp.81-86
• /
• 2006

본 논문은 유압 공급 면에서는 2중으로 전기제어 면에서는 3중으로 다중화된 DDV 구동장치에 대한 구동전류 고장 모니터 설계에 관한 논문이다. 다중화된 신호들 가운데 어느 한 채널에 고장이 발생한다면, 이 신호는 정확히 감지되어야 하고, 시기적절하게 제거되어야 하며, 남겨진 정상채널들은 그 기능이 재조정되어야 한다. 조종면 구동장치의 고장 모니터 설계는 비행체 역학, 비행제어법칙, 그리고 유압 구동장치 운동특성이 모두 고려된 통합적 관점에서 수행되어야 한다. MIL-F-8785C에서 규정하고 있는 고장에 따른 비행체 천이 응답 요구조건으로부터 조종면 구동장치의 고장이탈 한계를 결정하는 설계 방법이 제시되었다.

• 제어로봇시스템학회:학술대회논문집
• /
• 제어로봇시스템학회 1997년도 한국자동제어학술회의논문집; 한국전력공사 서울연수원; 17-18 Oct. 1997
• /
• pp.764-767
• /
• 1997

This paper presents the modulation of the dexterity of a parallel manipulator using joint freezing/releasing and joint unactuation/actuation. In this paper, individual limbs have redundant number of joints, and each joint can be frozen/released and unactuated/actuated, as needed. First, given a task, the restrictions on joint freezing and joint unactuation of a parallel manipulator are derived. Next, with/without joint freezing and/or joint unactuation, the kinematics of a parallel manipulator is formulated, based on which the manipulability ellipsoid is defined. The effects of joint freezing and joint unactuation on the manipulability are analyzed and compared. Finally, simulation results for a planar parallel manipulator are given. Joint mechanisms, such as joint freezing and joint unactuation, are rather simple to adopt into a parallel manipulator, but is quite effective to improve the task adaptability of the system.