• 제어로봇시스템학회논문지
• /
• 제11권6호
• /
• pp.550-557
• /
• 2005

The multivariate statistical analysis methods, using both multiple linear regression(MLR) and partial least square(PLS), have been applied to predict the reactor properties and the product quality of a direct esterification reactor for polyethylene terephthalate(PET) synthesis. On the basis of the set of data including the flow rate of water vapor, the flow rate of EG vapor, the concentration of acid end groups of a product and other operating conditions such as temperature, pressure, reaction times and feed monomer mole ratio, two multi-variable analysis methods have been applied. Their regression and prediction abilities also have been compared. The prediction results are critically compared with the actual plant data and the other mathematical model based results in reliability. This paper shows that PLS method approach can be used for the reasonably accurate prediction of a product quality of a direct esterification reactor in PET synthesis process.

• 디지털콘텐츠학회 논문지
• /
• 제8권2호
• /
• pp.213-225
• /
• 2007

본 연구는 정보화 분야에 있어서 우리나라 중소기업이 처한 일반적 상황 속에서 부산지역 중소기업의 위치를 확인하고 그에 대한 시책의 현황 및 실태 그리고 시책에 대한 수요자의 태도를 분석하였다. 분석결과, 부산은 전자상거래율을 포함하여 전국 평균 이하로 나타났다. 국내 총생산에서의 부산경제 비중을 고려할 때 부산지역의 중소기업 정보화 격차는 시급히 개선되어야 하는 과제이며 더욱 심각한 점은 제조업의 정보화 격차이다. 따라서 제조업 정보화 지원시책의 활성화와 현행 생산기술 정보화 지원사업의 확대가 필요하다고 보인다. 또한 문제해결과정에서 부산광역시도 적극적으로 자기 역할을 찾아야 할 것으로 보인다.

• 한국의류학회지
• /
• 제30권7호
• /
• pp.1001-1011
• /
• 2006

In the fashion enterprises of today, there are many kind of inter- enterprises' collaborations which are related to the strategic management for reinforcing their competitiveness in various fields. These inter- enterprises' collaborations, which began to increase in 2000, will increase even more in the near future. This study carries out the findings between collaborating companies' and their partners' characteristics and the actual conditions of collaborations through the responses of fashion enterprises' key employees. A questionnaire was answered by 194 key employees of the fashion enterprises in Korea and the analysis was completed by frequency analysis, cross tabulation analysis. The results of this study are the following; 1. Most of the enterprises of the same fashion categories collaborated with the promotion companies as their partners. The enterprises of different fashion categories collaborated strongly with the distribution companies as their partners. The strongest reason of the collaboration was for rapid product supplying to the market. 2. With regard to the management resources, the relationship between the collaborated companies and their partners had been formed by mutual assistance. Also, there were positive relationships between the collaborating companies and the partners concerning business reputation. The results of this study generated some valuable information that can be used in the fashion industry.

• 한국막학회:학술대회논문집
• /
• 한국막학회 2004년도 Proceedings of the second conference of aseanian membrane society
• /
• pp.19-24
• /
• 2004

ED method is employed to effectively remove the organic acid salts in actual PDO fermentation broth. The lower electrical potential is selected to avoid the serious membrane fouling so as to ensure a stable and durative desalination process. Under the selected operation conditions, about 90% of organic acids salts are removed from PDO fermentation broth successfully by ED process. To reduce the loss of PDO product due to the diffusion, the operation time should be considered carefully. And based on mass balance equation and irreversible thermodynamics approach, a mathematical model is developed to describe the desalination process of an aqueous solution containing neutral solute by ED method. While the influence of concentration polarization is reflected by decreasing the conductivity of membrane, the model is verified well to describe the ED processes under varied operation conditions. Through the model, ED process of actual PDO fermentation broth is simulated to get a suitable scope of initial concentration in concentrated compartment.

• 복식문화연구
• /
• 제11권5호
• /
• pp.647-656
• /
• 2003

Mass customization utilizes the new computer technologies, supply chain management, product information management, and some level of customization of the product for the individual customer. This study aimed at grasping the actual conditions of mass customization of domestic men's suit industry and the use of MTM CAD program. The MTM apparel production programs that are used by five leading men's suit manufacturers in Korea were compared. The results of the study showed that most of the manufacturers produced mass customized men's suits to supply extraordinarily large or small size suit based on the individual order. The information listed on an order sheet used at shops was not necessarily corresponding to the information in the MTM CAD program that is use for production of suit ordered from the shop. The pattern data base on the MTM CAD program are constructed based on the sizing system of individual manufacturer. The most manufacturers translated the customer's body dimensions into difference between the standard pattern and the customer's needed adjustment.

• 한국의류산업학회지
• /
• 제18권5호
• /
• pp.637-646
• /
• 2016

The goal of this study is to provide basic data on developing circular knit basic pattern for women in their 20's. Production conditions of circular knit product pattern making among domestic women's apparel industry was researched, and collected data on sizes and ease amounts from woven and circular knit pattern were compared and analyzed. According to the result of the survey, product measurements adjusted to the actual body size fit for the brand's image were used, and the common problem among manufacturers and consumers regarding circular knit products turned out to be change in size and form due to stretching. For the basic pattern of circular knit, stretching quality was reflected in the woven basic pattern based on plain stitch(single knit) and then dart was removed and ease amount was reduced. The result of looking into size and ease amount about woven and circular knit torso & sleeve block shows that there is a significant difference among chest circumference, hip circumference, bi-shoulder length, interscye back, interscye front, scye depth, upper arm circumference and wrist circumference, and it was clear that circumference and width on the areas around the wrist tended to fit around the body more when circular knit was used instead of woven fabric.

• 농업과학연구
• /
• 제46권4호
• /
• pp.723-735
• /
• 2019

The power-train is the most important component of an agricultural tractor. In this study, the strength of the driving gear transmission of an 82 kW-class tractor was analyzed using equivalent torque during plow tillage. The load measurement system consisted of an engine revolution speed sensor, torque-meters, revolution speed sensors for four axles, and pressure sensors for two hydraulic pumps. The load data were measured during plow tillage for four speed stages: F2 (2.78 km/h), F5 (5.35 km/h), F7 (7.98 km/h), and F8 (9.75 km/h). Aspects of the gear-strength such as bending stress, contact stress, and safety factors were analyzed under two torque conditions: the equivalent torque at the highest plow load for the F8 speed stage and the maximum engine torque. The simulation results using KISSsoft showed that the maximum engine torque conditions had a lower safety factor than did the highest equivalent torque condition. The bending safety factors were > 1 at all gear stages, indicating that gear breakage did not occur under actual measured operating conditions, nor under the maximum torque conditions. However, the equivalent torque condition in the contact stress safety factor was > 1, and the maximum torque condition was < 1 at the first gear pair. The method of analysis using the equivalent torque showed lower stress and higher safety factor than did the method using maximum torque. Therefore, when designing a tractor by applying actual working torque, equivalent torque method would support more reliable product development.

• 한국지역사회생활과학회지
• /
• 제14권3호
• /
• pp.89-98
• /
• 2003

To assess the actual status of businesses selling fermented soybean products, this study surveyed 130 Farmhouse style small size soybean sauce processing sites supported by the Rural Development Administration nationwide. The sex composition of the businesses representatives of 2% male and 98% female showed that a farmhouse soybean processing business is generally operated by rural women as a non-filming business. The percentage of co-worked sites was 71.2 and that of sites with permits was 39.2. The main products were meju, doenjang, and kanjang. Total production volume was found to be 523 tons, 256 tons, and 135 k$\ell$s, respectively. The number of years of experience of the manufacturers of the kanjang and doenjang was found to be 25.7 on average which shows that long-experienced, skilled manufacturers are participating in this project. The traditional measuring unit differed greatly depending on the region. This difference in the measuring unit of soybeans resulted in a large difference in the volume of doenjang and kanjang produced Per Province. For one kg of raw soybeans, the weight of Doenjang produced also varied from 2.14 kg in the Gyeongbuk area to 1.62 kg in Jeju. In the aspect of salt use, 1.75 $\ell$ (translated by volumetric unit 0.704 due) of salt pet kg of meju, in Jeju, was the highest in Korea. Government supervision would be beneficial in the areas of raw material products, standardization of measuring units and production methods, organization and operation of a conference for the different groups of producers, and in construction of a nationwide database.

• Human Ecology Research
• /
• 제56권5호
• /
• pp.417-424
• /
• 2018

The use stage of a textile product impacts sustainability more significantly than other stages of the product's life cycle due to repeated washing and drying. This study determines efficient washing conditions, with high detergency, to reduce energy consumption from excessive washing and improve the washing process sustainability. Detergency was measured at various washing temperatures ($20^{\circ}C$, $40^{\circ}C$, and $60^{\circ}C$) and time (10 min, 20 min, and 30 min) using standardized soiled fabrics, i.e., 100% cotton, polyester/cotton (65%/35%), and 100% polyester woven fabric soiled with pigment/sebum, carbon black/mineral oil, soot/mineral oil, cocoa, blood, and red wine. Detergency at the washing condition of $20^{\circ}C$ and 30 min was higher than that at $40^{\circ}C$ and 10 min. In addition, detergency at the condition of $40^{\circ}C$ and 30 min was also higher than that at $60^{\circ}C$ and 10 minutes. This may be because a reduced washing effect at low washing temperatures was complemented by increased mechanical action over a long time. Further, washing temperature and time, with the same detergency, differed based on the type of fiber and soil. Also, the influence of a detergent on the detergency depends on the type of soil. The results suggest that energy and detergent have been consumed more than necessary in actual laundry. According to each type of fiber and soil, washing conditions designed to reduce the energy consumption of the washing process while maintaining the same detergency, were determined.

• The Journal of Asian Finance, Economics and Business
• /
• 제7권6호
• /
• pp.255-264
• /
• 2020

The fourth industrial revolution has attracted much academic attention in these past few years. However, research on systematic and extensive factors affecting adoption of Industry 4.0 by SMEs in developing countries, especially in Vietnam, has been unavailable. This study aims to explore the impact of factors that influence the actual adoption of Industry 4.0 by SMEs in Ho Chi Minh City. Mixed-method research was utilized in this study including in-depth interviews of 12 participants and quantitative research of 396 respondents who are representative of SMEs by both online and via paper surveys. The SPSS and SmartPLS 3 software were employed to help analyze the collected data. The results indicate that perceived development of the human resource, perceived on-time, perceived saving cost, perceived improve product quality, perceived saving time, perceived ease-of-use, business resources, and conditions of the business environment, perceived usefulness, perceived enhanced customer relationship, and adoption intention, all have a positive significant effect on actual adoption of Industry 4.0. The results seem to suggest that managerial efforts aimed at increasing the factors' perceptions of adoption of Industry 4.0 and personal relevance of the technology will contribute to implementation success, where success is defined as effectual usage of the Industry 4.0.