• Journal of The Korean Society of Agricultural Engineers
• /
• v.62 no.3
• /
• pp.1-13
• /
• 2020

The management of agricultural water can be divided into management of agricultural infrastructure and operation to determine the timing and quantity of water supply. The target of water management is classified as water-supply facilities, such as reservoirs, irrigation water supply, sluice gate control, and farmland. In the case of agricultural drought, there is a need for water supply capacity in reservoirs and for drought assessment in paddy fields that receive water from reservoirs. Therefore, it is necessary to analyze the water supply amount from intake capacity to irrigation canal network. The analysis of the irrigation canal network should be considered for efficient operation and planning concerning optimized irrigation and water allocation. In this study, we applied a hydraulic analysis model for agricultural irrigation networks by adding the functions of irrigation canal network analysis using the SWMM (Storm Water Management Model) module and actual irrigation water supply log data from May to August during 2015-2019 years in Sinsong reservoir. The irrigation satisfaction of ponding depth in paddy fields was analyzed through the ratio of the number of days the target ponding depth was reached for each fields. This hydraulic model can assist with accurate irrigation scheduling based on its simulation results. The results of evaluating the irrigation efficiency of water supply can be used for efficient water distribution and management during the drought events.

• Journal of the Korean Society of Fisheries and Ocean Technology
• /
• v.27 no.1
• /
• pp.31-40
• /
• 1991

This paper described on the availability fo the underwater telemetering by the ulterasonic multi-beam system made as a trial to expand detectable range of the fish school. The ultrasonic multi-beam system consisted of four transducers which reconstructed with the existing net recorder. The experiment for the telemetering carried out in the set net fishing ground. The results obtained are summerized as follows: 1. The detectable distance of a target by the linear arrangement of four transducers increased according to the sea depth and the interval between transducers. 2. When the fish school in the entrance of set net was measured by linear arrangement of transducers it was entered in depth of 2.5~3.5m at near position of leader, and in depth of 3.5~4.5m at near position of door net. 3. The deviations of error between the actual position and the position by transducer in case of the target depth 1m, 1.5m, 2m were 5.9~27.1cm, 3.2~28.9cm, 3.5~25.8cm respectively, and 68.3% probability radius of them were 14.6cm, 17.7cm, 17.0cm respectively. 4. When the fish school in the fish court of set net was measured by plane arrangement of transducer it was entered toward the opposite direction of tide current. 5. The available distance of telemetering by the multi-beam transducer was 1.8km and the telemetering was possible to control everywhere in case of sea depth more than three meters.

• The Korean Journal of Pesticide Science
• /
• v.12 no.3
• /
• pp.229-235
• /
• 2008

Lack of honey bee toxicity data for most pesticide products used for strawberry restricts to predict the adverse effects to foraging honey bee after treatment of pesticide in plastic house. This study was conducted to evaluate the actual risk of worker honey bees (Apis mellifera L.) through acute contact toxicity test, acute oral toxicity test and toxicity of residues on foliage test with 21 pesticide products. The mortality of honeybee sprayed with 6 pesticides including dichlofluanid WP showed significantly different from control at recommended application rate in acute contact toxicity test at 24 hours after treatment. Fenpropathrin EC and milbemectin EC treatment groups showed more than 25% mortalities at recommended application rate in acute oral toxicity test. In toxicity of residues on foliage test, only fenpropathrin EC treatment group showed more than 25% mortalities at 10 days after treatment at recommended application rate. It was concluded that the most toxic route to exposure for honey bee is direct contact exposure to sprayed pesticides. Safety interval for honey bee was established by concerning the results of these tests.

• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.18 no.11
• /
• pp.104-109
• /
• 2017

The flooding and deterioration of water quality caused by urbanization and climate change are becoming more serious. In order to respond to this, studies on low impact development (LID) technology, which is designed to restore the hydrological system of the urban basin to its natural state, have been actively pursued all over the world, The announcement of the low carbon green growth law, hydrophilic area special law, etc., highlights the importance of technology such as the LID method. However, whereas various developments have been made in relation to the current LID element technology, there has been little research designed to verify its effectiveness. In this study, we analyzed the optimum spatial distribution of pitcher fire pitcher packing in parking lots using the K - LIDM model to verify the effectiveness of the low impact development (LID) method in the early stages. Using the eight package scenario and the three rain intensity scenarios, it was found that the lower 40% pitcher packaging results in an approximately 90% spill reduction effect, as in the case of the whole pitcher's package. The confirmation of these analyses and experimental verification is expected to ensure that the actual pitcher packaging will be used as a basis for arranging LID facilities such as urban planning and housing development in the future.

• Korean Journal of Human Ecology
• /
• v.6 no.2
• /
• pp.121-131
• /
• 1997

This study was to design the clean room garment which fits for a body and adjusts well to the action. We examined the body's changes in action through a body measurment and made a sample of the clean room garment to which had adapted the body's changes in action and evaluated the function and the appearance compared with the existing the clean room garment. The followings were summery of the results : 1. Back intersyce breadth decreased, trunk length increased and the other parts were not change. At a posture of raising hands($M_3$) in comparison with an upright posture($M_0$). Back intersyce breadth, hip length and knee length increased and the other parts were a little change. At a bowing posture($M_2$) in comparison with an upright posture($M_0$). Back hip girth, knee length, hip length and leg length increased and the other parts were not change. At a working posture on a chair($M_1$) in comparison with an upright posture($M_0$). 2. The overall clean room garment was made increasing on the changes of part of a body through measuring and body measurement. 3. From the test of the function, it became known that the devised clean room garment was superior to the existing one in the parts of neck, shoulder, armpit and elbow at a working posture on a chair($M_1$), in the parts of neck, shoulder, and armpit at a bowing posture($M_2$), and the armpit at a posture of raising hands($M_3$). The appearance was better on the whole. 4. From the examination of photographs, the waist line of the devised clean room garment was not so much pulled up as that of the existing one on moving. And when sitting down on a chair, the waist line of the existing one was pulled down while that of the devised one had no change. As above, we investigated the actual conditions of wearing the clean room garment and measured the body's changes according the various actions. So we applied these results to the devised clean room garment but we couldn't research the clean mom effect of it owing to not obtaining the measuring instrument. The aspect of ergonomics liked the feeling of wearing and fitted to the action must be given consideration to the clean room garment, and simultaneously the dust-resistant effect must be taken into consideration in order to improve the quality of the goods. Therefore, we think it should be continued the research on the dust-resistant effect, material, washing method, quality control, and size along with the aspect of ergonomics.

• The Korean Nurse
• /
• v.32 no.4
• /
• pp.48-62
• /
• 1993

This study was done for the purpose of analyzing the job-satisfaction and its depressive factors in human relation of operating room nurses of university hospital. Therfore, it makes an offer the basic data to help the resolution and prevention of the problems in operating room nurses. Furthermore, this study was conducted in order to find out some kinds of scientific data for the better control of depressive factors of job-satisfaction expressed by the operating room nurses. The structred questionaire reports of 246 operating room nurses who were employed in 5 different university hospitals which have over 1, 000 beds located in Seoul, Korea were used, which wer collected from August 24th to August 30th of 1992. The author visited supervisors of operating room in each university hospital and explained the aim of this study. The most of them(90.0%) answered to the questionaires. Analysis of the collected data were done by mean, standard deviation, percentage, t-test, F-test, Q-test, correlation analysis, one-way ANOVA.and stepwise multiple regression analysis. Major findings of this study were as follows: 1. The job of the operating room nurses were remarkably related with the satisfaction in human relation, which was defined as the behavioral job with thoughtful action rather than with mechanical action. However, the degree of satisfaction in human relation with personnel in other departments was found to be the lowest and its the main depressive factors were appeared due to the absence of interaction and uncooperative attitudes. Therefore, it was required that the members of other job need more cooperative attitude to the actual works in the operating room nurses. 2. The depressive factors in the satisfaction degree of human relation with offical seniors wer significantly related with their irresponsibility and partialness. Moreover, the job attitude of the operating room nurses is abundantly required to be improved, 3. The depressive factors in the satisfaction of human relation with medical doctors were significantly related with their insincerity and the class-consciousness. It is clearly suggested that the medical doctors do more cooperative behaviors for the jobs of the operating room without the suggested that the medical doctors do more cooperative behaviors for the jobs of the operating room without the superiority feeling of class-consciousness. 4. There was a significantly positive association between the satisfaction degree of human relation of the nurses with the following charateristics. (1) The registered nurses which had a tendency to be satisfied about the registered nurses' job. (2) The registered nurses which had a tendency to be a technique-aptitued in the motivation of the registered nurses'job. (3) The registered nurses which had a tendency to be satisfied about the total hospital working carrier and the aspects of old ages. Finally, these findings indicated that the operating room nurses should require the professional education courses associated with a high-development techniques and setisfaction in their jobs.

• Journal of Korean Physical Therapy Science
• /
• v.9 no.2
• /
• pp.143-149
• /
• 2002

Nowadays senile dementia is on the rise as consequence of serious social problem because of it is old aged society by improvement of medical service. However remedial approach is not being done because of we still don't have an infallible cure of dementia and dementia is been hard to cure. Thus it is introduced in this study to the concept of Occupational therapy, which is one of the remedies. I tried to find out which remedy is the best to cure demented elderly and which is been able to use on field. For this study, I applied a developed Occupational therapy program in actual practice. First, I chose nine demented elderly who are lived in 'David's house' located in Daejon metropolitan city, and I separated them in three groups for this study. Second, I applied each Occupational therapy to first and second group, and I did not apply any Occupational therapy to third group. The first and second group was applied the program, two times a week for an hour, for three months. The measurement of Cognitive function was practiced five times - one time before applying the Occupational therapy by MMSE-K, and three times during applying the program, and one time after ending of the program. The measurement of ADL was practiced two times - one time before applying the Occupational therapy by the Barthel ADL, and one time after one month from ending the program. Effectiveness of Occupational therapy and possibility of application of Occupational therapy program are proved because of this study shows the Occupational therapy keeps well the cognitive function and the ADL function of demented elderly, improves those functions, affects positively to the whole life. However we must develop Occupational therapy, which is proper to a trait of character, and expanded application is needed. In addition, temporary remedy must not be performed but continuous cure. This study will be complement by studying about special situation researcher cannot control something like unexpected death of demented elderly by other diseases.

• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.21 no.8
• /
• pp.1-8
• /
• 2020

Air ducts installed for ventilation inside buildings accumulate contaminants during their service life. Robots are installed to clean the air duct at low cost, but they are still not fully automated and depend on manpower. In this study, an intersection detection algorithm for autonomous driving was applied to an air duct cleaning robot. Autonomous driving of the robot was achieved by calculating the distance and angle between the extracted point and the center point through the intersection detection algorithm from the camera image mounted on the robot. The training data consisted of CAD images of the duct interior as well as the cross-point coordinates and angles between the two boundary lines. The deep learning-based CNN model was applied as a detection algorithm. For training, the cross-point coordinates were obtained from CAD images. The accuracy was determined based on the differences in the actual and predicted areas and distances. A cleaning robot prototype was designed, consisting of a frame, a Raspberry Pi computer, a control unit and a drive unit. The algorithm was validated by video imagery of the robot in operation. The algorithm can be applied to vehicles operating in similar environments.

• Journal of Distribution Science
• /
• v.11 no.12
• /
• pp.25-37
• /
• 2013

Purpose - The structure of retailing has changed as retailers develop markets in response to business environment changes. This study aims to analyze the general situation of retailers in order to predict future global strategy using case studies of overseas expansion strategy and the Metro Group's global strategy. Research design, data, and methodology - The backgrounds to the new retail business model and retailer classification are analyzed as theoretical data. In addition, the key success point of the Metro Group's "cash and carry" strategy is analyzed as is the Metro Group's global CFAR (collaborative planning, forecasting, and replenishment) strategy. Finally, the plan for cooperation and precise forecasting under the Metro Group's supply chain management are analyzed from the promotion environment viewpoint. Related materials analyzed included the 2012 annual report, the Metro Group's web page, and a video interview with the executive in charge of global strategy and the new market development department. Some data were revised to avoid disrupting essential aspects of the case studies. Results - The important finding was that the Metro Group could be a world-class retail company with its successful global expansion strategy. The Metro Group's global strategy's primary goal is to have a leading business position in Eastern and Western Europe. The "cash and carry" strategy is highest priority in its overseas expansion strategy. Moreover, the Metro Group has standardized product planning capacity, which could be applied in various countries with different structural and cultural backgrounds. This is the main reason that the Metro Group could rapidly become successful in the Eastern Europe and Asian markets through its structural overseas expansion strategies. In addition, the Metro Group emphasizes the importance of supply chain management. Conclusions - First, retailers should create additional value through utilizing the domestic market, market power, and economies of scale to launch a global strategy to maximize benefits from diversification. Second, the political, economic, and cultural background of the target country needs to be understood to successfully implement the overseas expansion strategy. Third, the main factor of successful cooperation with a local partner is how quickly the company gains total understanding of the business resources and core competence of its partner. All organizations should focus on the achievement of goals in order to successfully operate the partnership. Fourth, retailers should improve their business, financial and organizational structure. Moreover, the work processes and company culture should also be improved to respond strongly in the competitive global market. Fifth, the essential point of a successful retail business is the control capacity of its branding and format. The retailer could avoid forecasting errors through supply chain management by perfectly distributing the actual amount of its inventory. In addition, the risks along the supply chain are effectively shared between the supply chain partners. Finally, the central tendency of the market is to gain in strength with this taking place across all parts of the business.

• Journal of Intelligence and Information Systems
• /
• v.24 no.1
• /
• pp.125-140
• /
• 2018

As one of the processes in the manufacturing industry, quality inspection inspects the intermediate products or final products to separate the good-quality goods that meet the quality management standard and the defective goods that do not. The manual inspection of quality in a mass production system may result in low consistency and efficiency. Therefore, the quality inspection of mass-produced products involves automatic checking and classifying by the machines in many processes. Although there are many preceding studies on improving or optimizing the process using the data generated in the production process, there have been many constraints with regard to actual implementation due to the technical limitations of processing a large volume of data in real time. The recent research studies on big data have improved the data processing technology and enabled collecting, processing, and analyzing process data in real time. This paper aims to propose the process and details of applying big data for quality inspection and examine the applicability of the proposed method to the dairy industry. We review the previous studies and propose a big data analysis procedure that is applicable to the manufacturing sector. To assess the feasibility of the proposed method, we applied two methods to one of the quality inspection processes in the dairy industry: convolutional neural network and random forest. We collected, processed, and analyzed the images of caps and straws in real time, and then determined whether the products were defective or not. The result confirmed that there was a drastic increase in classification accuracy compared to the quality inspection performed in the past.