• Journal of the Korean Ceramic Society
• /
• 제40권12호
• /
• pp.1177-1182
• /
• 2003

The porous sensing materials for BaTiO$_3$ gas sensors were fabricated by adding the graphite powders. The crystalline structure and microstructure of the porous BaTiO$_3$-based ceramics were studied. All the sintered bodies showed a tetragonal perovskite structure. The porosity increased with increasing graphite contents. This is mainly due to an enhanced evolution of CO and $CO_2$ gases resulting from the exothermic reactions of graphite and oxygen during the sintering. It was found that the discrepancy in the resistivities measured in air and CO atmospheres at high temperatures (>∼20$0^{\circ}C$) became remarkable with increasing temperature. The sensitivity of CO gas increased with porosity, since the reactions between CO gas and $O_2$$^{[-10]}$ and between CO gas and $O^{[-10]}$ are active due to the formation of many reaction sites. The porous BaTiO$_3$-based ceramics could be promising as a sensing material for CO gas sensors.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• 제40권7호
• /
• pp.1347-1353
• /
• 2015

We implemented a 10 Gb/s 4-channel vertical cavity surface emission lasers (VCSEL) driver array in a $0.13{\mu}m$ CMOS process technology. To enhance high current resolution, power dissipation, and chip space area, digital APC/AMC with time division sensing technology is primarily adopted. The measured -3 dB frequency bandwidth is 9.2 GHz; the small signal gain is 10.5 dB; the current resolution is 0.01 mA/step, suitable for the wavelength operation up to 10 Gb/s over a wide temperature range. The proposed APC and AMC demonstrate 5 to 20 mA of bias current control and 5 to 20 mA of modulation current control. The whole chip consumes 371 mW of low power under the maximum modulation and bias currents. The active chip size is $3.71{\times}1.3mm^2$.

• Smart Structures and Systems
• /
• 제6권8호
• /
• pp.939-951
• /
• 2010

A low-cost wireless sensor network (WSN) solution with highly expandable super and simple nodes was developed. The super node was designed as a sensing unit as well as a receiving terminal with low energy consumption. The simple node was designed to serve as a cheaper alternative for large-scale deployment. A 12-bit ADC inputs and DAC outputs were reserved for sensor boards to ease the sensing integration. Vibration and thermal field tests of the Chi-Lu Bridge were conducted to evaluate the WSN's performance. Integral acceleration, temperature and tilt sensing modules were constructed to simplify the task of long-term environmental monitoring on this bridge, while a star topology was used to avoid collisions and reduce power consumption. We showed that, given sufficient power and additional power amplifier, the WSN can successfully be active for more than 7 days and satisfy the half bridge 120-meter transmission requirement. The time and frequency responses of cables shocked by external force and temperature variations around cables in one day were recorded and analyzed. Finally, guidelines on power characterization of the WSN platform and selection of acceleration sensors for structural health monitoring applications were given.

• Proceedings of the National Institute of Ecology of the Republic of Korea
• /
• 제1권1호
• /
• pp.31-40
• /
• 2020

The rapid development of technologies in unmanned aerial vehicles (UAVs) has led to their use in various areas. UAVs are mainly used for commercial purposes, but their utilization is increasingly important in other areas because their operation cost is less than satellites and aerial imaging. The utilization of UAVs in the environment/ecology area is relatively new. Therefore, identifying the trends of UAV-related spatial information is significant in basic research for UAV utilization. This study quantitatively identified domestic and international research trends related to UAV utilization and analyzed research areas. An attempt was also made to identify upcoming UAV-related topics in the environment/ecology research field using text mining to analyze the bibliographic information of global research literature. Domestic UAV-related studies were classified into seven clusters where basic research on "UAV technology/industry trends" was abundant, and studies on data collection and analysis through UAV remote sensing technology have increased since 2015. Eight clusters were identified for international studies where the most active research area international was "remote sensing technology/data analysis". In addition, Canopy, Classification, Forest, Leaf Area Index, Normalized Difference Vegetation Index, Temperature, Tree, and Atmosphere appeared as the main keywords related to environment and ecology. The appearance frequencies and association strengths were high because the advancement in UAV optical sensor technology and the rapid development of image processing technology enabled the acquisition of data that could not be obtained from existing spatial information. They are recognized as future research topics as related domestic studies have begun corresponding to international research.

• Journal of the Korean Society for Nondestructive Testing
• /
• 제34권5호
• /
• pp.369-376
• /
• 2014

This paper presents a method that integrates passive and active-sensing techniques for the structural health monitoring of plate-like structures. Three piezoelectric transducers are deployed in a L-shape to detect and locate an impact event by measuring and processing the acoustic emission data. The same sensor arrays are used to estimate the subsequent structural damage using guided waves. Because this method does not require a prior knowledge of the structural parameters, such as the wave velocity profile in various directions, accurate results could be achieved even on anisotropic or curved plates. A series of experiments was performed on plates, including a spar-wing structure, to demonstrate the capability of the proposed method. The performance was also compared to that of traditional approaches and the superior capability of the proposed method was experimentally demonstrated.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• 제35권2B호
• /
• pp.244-251
• /
• 2010

CSD is Active RFID based Container Security Device which is proposed by the U.S Department of Home Security. It is mounted inside the container to sense opening of the container door. ConTracer is the CSD which is developed in this research whose major features are sensing door opening status as well as history inquiring on internal environment and shock to the container by mounting the temperature/humidity/shock sensors. Moreover, its RFID frequency bandwidth uses 433MHz and 2.4GHz to correspond actively to the radio regulations used by different countries. This paper introduces the development trend of CSD, compares the ConTracer which is developed thru this research and other company's CSD, and introduces CSD System which is designed and established using ConTracer. Finally, the implemented CSD System is verified by applying the demonstration service to container distribution between Korea and China.

• Journal of Korean Society for Geospatial Information Science
• /
• 제17권1호
• /
• pp.113-120
• /
• 2009

Through the automatic sensing of the environment, USN technology can give the best services. In this work, we have developed an active RFID system and examined its performance. By implementing it into water quality sensors, we constructed a system that can detect diverse indoor/outdoor environment and provide information about the pollution level obtained from the temperature and PH sensors. Our RF system had an internal Print-on-PCB antenna for the miniaturization of the tag. We used a RF transceiver CC2510 chipset of TI company to realize the active RFID function. By using RSSI constants obtained, we performed the evaluation of real time location accuracy with a software written in Labview. Among 10 arbitrary locations, we obtained average measurement errors of 1.69 m in x axis and 1.66 m in y axis. This technology can be applied to logistics, environmental monitoring, prevention of missing children and various applications.

• Proceedings of the Korean Institute of Information and Commucation Sciences Conference
• /
• 한국해양정보통신학회 2009년도 춘계학술대회
• /
• pp.95-98
• /
• 2009

RFID(Radio Frequency IDentification) technology is an automatic identification method using radio frequencies between RFID reader which collects the informatin and tag which transmits the information. RFID technology develops passive RFID which transmit the only ID to active RFID which transmit the additional information such as sensing information. there is ISO/IEC 18000-7 as typical standard of active RFID. it is single channel system of 433.92MHz and has limitation of collection of a number of tags. to overcome limitation of collection of many tags, we propose the new 2.4GHz active RFID technology which can use the multi-channel. if reader has multi-interface and uses another channel in each, reader could fast collect the tags. but, if a reader which has many interfaces collects tags through the specific interface, the performance may not improve any more comparing with a reader using single interface. in this paper, we show the fast collection through design and implementation of protocol for load balancing between interfaces in multi-interface RFID reader.

• Proceedings of the Korean Institute of Information and Commucation Sciences Conference
• /
• 한국해양정보통신학회 2009년도 추계학술대회
• /
• pp.139-142
• /
• 2009

RFID(Radio Frequency IDentification) technology is an automatic identification method using radio frequencies between RFID reader which collects the information and tag which transmits the information. RFID technology develops passive RFID which transmit the only ID to active RFID which transmit the additional information such as sensing information. However, ISO/IEC 18000-7 as active RFID standard has a problem which cannot use multiple channel. To solve this problem, we use the 2.4GHz bandwidth technology and we propose the dynamic channel allocation method which can efficiently allot a channel. we show the operation of the dynamic channel allocation method through design and implement with CC2500DK of Taxas Instrument.

• Journal of the Korea Society of Computer and Information
• /
• 제25권12호
• /
• pp.195-202
• /
• 2020

The control system for the efficiency of resource utilization in sensor network environment based on object detection and environmental sensor requires active control function which based on sensor data acquisition and transmission functions and server's data analysis. Using active rule-based mobile agent middleware, this paper proposes a new distributed control framework that reduces the load of central sensor data server in sensor network environment by implementing remote data sensing and Zigbee-based communication with server and data analysis method of server. In addition, we implemented a power-saving system prototype using active rule-based distributed control methods that applied consumer's demand and environmental variables, and verified the validity of the proposed system through experiments and evaluations in the mobile agent middleware environment. The proposed system is a system framework that can efficiently autonomously control distributed objects in the sensor network environment, and it can be applied effectively to the development of demand response service based on optimal power control for the smart power system in the future.