• 한국정밀공학회:학술대회논문집
• /
• 한국정밀공학회 2000년도 추계학술대회 논문집
• /
• pp.165-168
• /
• 2000

Engine noise is one of the major causes of the interior noise, and so has been studied in various ways in recent days. Recently air induction noise has been extensively studied to reduce the engine noise. Conventional method to reduce the noise is adding several resonators to the induction system. However this causes a reduction of engine output power and an increase of fuel consumption. Thus in this study, the feasibility of applying the active noise control to the induction system is studied to the overcome the above disadvantage.

• 한국구조물진단유지관리공학회 논문집
• /
• 제26권5호
• /
• pp.49-56
• /
• 2022

본 연구에서는 능동소음제어(ANC, Active Noise Control) 기술을 이용하여 공동주택의 층간소음을 저감시키는 시뮬레이션 기반 연구를 수행하였다. ANC의 층간소음 저감 활용 가능성을 검토하기 위하여 층간소음시험시설에서 가속도계와 소음 수집용 마이크로폰을 설치하여 임팩트볼 낙하에 의한 소음진동을 측정하여 Fx-LMS 알고리즘 기반의 능동소음제어 시뮬레이션을 수행하였다. 이 과정에서 적응제어 수렴계수 등의 최적 시뮬레이션 조건을 도출한 후 가속도계와 스피커 수량을 변수로 하는 수치 시뮬레이션을 통해 소음저감효과를 분석하여 제한된 조건에서 층간소음을 저감시킬 수 있는 것을 확인하였다.

• 한국소음진동공학회:학술대회논문집
• /
• 한국소음진동공학회 2002년도 추계학술대회논문초록집
• /
• pp.399.2-399
• /
• 2002

This paper concerns on a non-rotating single-DOF beam-active magnetic bearing(AMB) system subject to arbitrary shaped base motion. In such a system, it is desirable to retain the beam within the predetermined air-gap under foundation excitation. Motivated form this, an adaptive acceleration feedforward control is proposed to reduce the base motion response without deteriorating other feedback control performances. Experimental results demonstrate the effectiveness of the acceleration feedforward control.

• Smart Structures and Systems
• /
• 제20권3호
• /
• pp.273-283
• /
• 2017

This paper presents and compares three feedback control strategies for active control of noise inside a 3-D vibro-acoustic cavity. These are a) control strategy based on direct output feedback (DOFB) b) control strategy based on linear quadratic regulator (LQR) to reduce structural vibrations and c) LQR control strategy with a weighting scheme based on structural-acoustic coupling coefficients. The first two strategies are indirect control strategies in which noise reduction is achieved through active vibration control (AVC), termed as AVC-DOFB and AVC-LQR respectively. The third direct strategy is based on active structural-acoustic control (ASAC). This strategy is an LQR based optimal control strategy in which the coupling between the various structural and the acoustic modes is used to design the controller. The strategy is termed as ASAC-LQR. A numerical model of a 3-D rectangular box cavity with a flexible plate (glued with piezoelectric patches) and with other five surfaces treated rigid is developed using finite element (FE) method. A single pair of collocated piezoelectric patches is used for sensing the vibrations and applying control forces on the structure. A comparison of frequency response function (FRF) of structural nodal acceleration, acoustic nodal pressure, and piezoelectric actuation voltage is carried out. It is found that the AVC-DOFB control strategy gives equal importance to all the modes. The AVC-LQR control strategy tries to consume the control effort to damp all the structural modes. It is seen that the ASAC-LQR control strategy utilizes the control effort more intelligently by adding higher damping to those structural modes that matter more for reducing the interior noise.

• 한국자동차공학회논문집
• /
• 제6권1호
• /
• pp.36-42
• /
• 1998

In this study, active muffler was designed and was manufactured for exhaust noise reduction of commercial vehicle, then experiment of real vehicle was conducted. In a manufactured active muffler, because the flow of exhaust noise in tail pope outlet are become a plane wave, the global reduction if radiation noise from outlet and the placement of error microphone to avoid the exhaust gas of high temperature could be implemented. In control algorithm, reduction of noise of engine driving frequency and harmonic frequency can be archieved using proposed reference signal including a fixed speed state(2,000rpm, 3,000rpm, 4,000rpm) and a run-up speed state(2,000rpm$\rightarrow$4,000rpm) is accomplished with the active muffler installed in vehicle.

• 한국정밀공학회:학술대회논문집
• /
• 한국정밀공학회 2011년도 춘계학술대회 논문집
• /
• pp.829-830
• /
• 2011

• 한국소음진동공학회:학술대회논문집
• /
• 한국소음진동공학회 2000년도 춘계학술대회논문집
• /
• pp.274-279
• /
• 2000

Driving of the engine makes unbalance forces which induces vibration to the engine mount system. Active vibration control must be performed to reduce the vibration and the propagation of structure-born sound. In this study, the engine system is modeled as 3-dim. vibration system including flexible structures and an effective active noise control method is proposed. Also, appropriate actuator and sensor locations and types are selected. The miniature of the engine vibration system with multi-input multi-output is built and an active vibration control with multiple filtered-X LMS algorithm is applied to it. The applied control method was effective to reduce the transmitted vibration power through the rubber mount It showed the feasibility of the control of the engine vibration systems with flexible structures.

• 한국자동차공학회논문집
• /
• 제19권4호
• /
• pp.84-90
• /
• 2011

In active noise control filter, LMS algorithms which used for control filter, assure the convergence property, and computational burden of these algorithms are proportionate to the filter taps. The convergence speed of LMS algorithms is mainly determined by value of the convergence coefficient, so optimal selection of the value of convergence coefficient is very important. In this paper, We proposed novel adaptive fuzzy logic LMS algorithms with FIR filter structure which has better convergence speed and less computational burden than conventional LMS algorithms, for single channel active noise control with ill conditioned signal case. Computer simulations were performed to show the effectiveness of a proposed algorithms.

• 제어로봇시스템학회논문지
• /
• 제7권2호
• /
• pp.102-108
• /
• 2001

In this paper, an active noise controller for a communication headset was designed. In a communication headset, there exist information signals such as voices from the end for the communication line as well as also, undesirable noises with are induced by external noise sources such as engine noises. Therefore, it is necessary to reduce the external noises for clear hearing of the communication signals. This problem was solved by robust H(sub)$\infty$ controller to reduce noise and a compensator for information signals The designed controller was implemented using TMS320C31 DSP Op-amp, and several experiments were performed to verify its performance. The results showed that the controller reduces the undesirable noises sufficiently, while communication signals are not reduced.

• Journal of Power Electronics
• /
• 제16권3호
• /
• pp.1236-1243
• /
• 2016

This paper presents the analysis and design of an active electromagnetic interference (EMI) filter (AEF) for the common-mode (CM) noise reduction of switching power converters. The features of the several types of AEFs are discussed and compared in terms of implementation. The feed-forward AEF with a voltage-sensing and voltage-cancellation (VSVC) structure is implemented for an LLC resonant converter to replace a multiple-stage passive EMI filter and thereby reduce CM noise. The characteristics and performance of the VSVC-type AEF are investigated through theoretical and experimental works.