• 대한전기학회:학술대회논문집
• /
• 대한전기학회 2006년 학술대회 논문집 정보 및 제어부문
• /
• pp.196-198
• /
• 2006

In this paper, a stereoscopic display system using a rotary disk tyre beam shutter and two beam projectors is proposed. It is a kind of active stereoscopic display and can be easily converted from passive stereoscopic system using polarizing filters. If it is possible to synchronize the revolution speed of the beam shutter with the integer multiple of the scanning frequency of the beam projectors, we can obtain a comparable performance with our system to an active stereoscopic system using one expensive high performance beam projector. Further, if we rotate the beam shutter at sufficiently high revolution speed, our active stereoscopic system works regardless of synchronization and thus the system is much easier to implement.

• 한국HCI학회:학술대회논문집
• /
• 한국HCI학회 2007년도 학술대회 1부
• /
• pp.739-743
• /
• 2007

In this paper, a stereoscopic display system using a rotary disk type beam shutter and two beam projectors is proposed. It is a kind of active stereoscopic display and can be easily converted from passive stereoscopic system using polarizing filters. If it is possible to synchronize the revolution speed of the beam shutter with the integer multiple of the scanning frequency of the beam projectors, we can obtain a comparable performance with our system to an active stereoscopic system using one expensive high performance beam projector. Further, if we rotate the beam shutter at sufficiently high revolution speed, our active stereoscopic system works regardless of synchronization and thus the system is much easier to implement.

• 한국전자통신학회논문지
• /
• 제14권6호
• /
• pp.1031-1036
• /
• 2019

본 연구는 드론 및 능동 빔패턴 측정장치를 활용하여 초단파레이다용 배열안테나의 빔패턴 측정내역에 대해서 기술하였다. 아직 국내에서는 크기가 큰 초단파대역용 안테나의 빔패턴을 측정하기 위한 무반사실이 없는 상황이다. 본 연구는 개발된 초단파레이다의 안테나 빔패턴 특성을 시험하기 위하여 드론에 능동 빔패턴 측정장치 및 수신안테나를 장착하여 안테나 빔패턴 특성을 시험하였다. 안테나에 대한 사전 시뮬레이션 분석결과와 측정된 결과를 비교하였을 때 빔폭 특성 및 부엽특성이 만족함을 확인 할 수 있었다. 향후 드론 및 능동 빔패턴 측정장치를 활용한 안테나 빔패턴 측정기술을 통하여 안테나 크기가 큰 저주파대역 레이다용 배열안테나의 빔패턴 측정 기술을 활용할 예정이다.

• Smart Structures and Systems
• /
• 제20권6호
• /
• pp.657-668
• /
• 2017

In this research, an active vibration suppression of a smart beam having piezoelectric sensor and actuators is investigated by designing separate controllers comprising a linear quadratic regulator and a neural network. Firstly, design of a smart beam which consists of a cantilever aluminum beam with surface bonded piezoelectric patches and a designed mechanism having a micro servomotor with a mass attached arm for obtaining variations in the frequency response function are presented. Secondly, the frequency response functions of the smart beam are investigated experimentally by using different piezoelectric patch combinations and the analytical models of the smart beam around its first resonance frequency region for various servomotor arm angle configurations are obtained. Then, a linear quadratic regulator controller is designed and used to simulate the suppression of free and forced vibrations which are performed both in time and frequency domain. In parallel to simulations, experiments are conducted to observe the closed loop behavior of the smart beam and the results are compared as well. Finally, active vibration suppression of the smart beam is investigated by using a linear controller with a neural network based adaptive element which is designed for the purpose of overcoming the undesired consequences due to variations in the real system.

• Smart Structures and Systems
• /
• 제10권1호
• /
• pp.15-31
• /
• 2012

This study proposes an active control method to suppress beam-rotating machinery system vibrations. The present control method is a combination of the fuzzy input estimation method (FIEM) and linear quadratic Gaussian problem (LQG) algorithms. The FIEM can estimate the unknown input and optimal states by measuring the dynamic displacement, the optimal estimated states into the feedback control; thereby obtaining the optimal control force for a random linear system. Active vibration control of a beam-rotating machinery system is performed to verify the feasibility and effectiveness of the proposed algorithm. The simulation results demonstrate that the proposed method can suppress vibrations in a beam-machine system more efficiently than the conventional LQG method.

• Journal of Welding and Joining
• /
• 제15권3호
• /
• pp.88-98
• /
• 1997

Welding defects, such as porosity and spike, have sometimes occurred in deep penetration electron beam welds. These defects are known to be one of the serious problem in electron beam welds. So, effects of active parameters ($a_b$) on bead shape and occurrence of defects in electron beam welds of heavy section 9%Ni steel plates were investigated. Partial penetration welding in flat position, and deep penetration welding of 10 ~ 28mm depth were investigated in this study. It is desirable to select low accelerating voltage and above the surface focus position $a_b$$\geq$1.2 at which a wine-cup shaped bead is obtained to avoid the welding defects such as spike and root porosity. When the accelerating voltage of electron beam was low (90kV), active parameter ($a_b$) did not influence on the bead width, penetration depth and weld defects significantly. However, in case of high voltage ($\geq$120kV), active parameter ($a_b$) was sensitively associated with penetraton depth and weld defects, i.e. when the active parameter (($a_b$) was in the range of 0.6 to 1.0, the depth of penetration was always over the target (23mm), while the depth of penetration was dramatically decreased with further increase of active parameter ($a_b$). The weld defects were decreased with the increase of active parameter $a_b$ resulting in the decrease of energy density of the focused beam in the root part of fusion zone.

• 한국산업융합학회 논문집
• /
• 제25권4_1호
• /
• pp.505-511
• /
• 2022

The objective of this article is finding optimized locations of active mounts applied to 6-DOF beam structure with two active paths. When sinusoidal excitation forces are applied to the beam structure, secondary forces from two active mounts which can minimize (ideally becoming zero) transmitted forces are calculated mathematically and the vibration attenuation performance is validated through computer simulations. When the force applied to two active mounts are relatively low, those specific locations are considered as optimized location of active mounting system. As the location of mount changes, amplitude and phase of secondary forces in each path are analyzed with 3D plots. Based on the simulation results, a criterion for selecting mounting location is suggested and it would be very useful for selecting actuators for active mounts appropriately.

• 한국자동차공학회논문집
• /
• 제5권2호
• /
• pp.205-212
• /
• 1997

In this study, active vibration control for a flexible cantilever beam was performed by using the intelligent control technique. The intelligent control method which integrating the back propagation algorithm and the fuzzy inference technique was proposed and its performance was examined. The proposed control algorithm for the flexible cantilever beam was verified via computer simulation of active vibration control. Furthermore, the control system and its efficiency were investigated via experiments on active vibration control by the intelligent control technique without a digital signal processing device.

• 소음진동
• /
• 제5권3호
• /
• pp.313-325
• /
• 1995

Two active/passive vibration dampers were designed to control a cantilever beam first mode of vibration. The active element was a piezoelectric polymer, polyvinlidene fluoride (PVDF). The passive damping was provided by the application of a viscoelastic layer on the surface of the steel beam. Two substantially different damper configurations were designed and tested. One damper consisted of a piezoelectric actuator bonded to one face of the beam, with a viscoelastic layer applied to the other surface of the beam. The second one was composed of a layer viscoeastic layer with one surface bonded to the beam, and with other being constrained by nine piezoelectric actuators connected in parallel. A control law based on the sign of the angular velocity of the cantilever beam was implemented to control the beam first mode of vibration. The piezoelectric sensor output was digitally differentiated to obtain the transverse linear velocity, and its sign was used in the control algorith. Two dampers provided the system a damping increase of a factor of four for the first damper and three for the second damper. Both dampers were found to work well at low levels of vibration, suggesting that they can be used effectively to prevent resonant vibrations in flexible structure from initiating and building up.

• 한국전자파학회논문지
• /
• 제25권10호
• /
• pp.1069-1076
• /
• 2014

본 논문은 능동위상배열 레이더가 여러 개의 표적을 탐지/추적하기에 효과적인 수신빔 구조에 대해 기술하고 있다. 위상배열 레이더가 갖는 특성 중 하나는 원하는 방향으로 빔을 조향하고, 디지털적으로 여러 개의 빔을 동시에 형성하는 것이다. 이와 같은 디지털 빔 형성 수신빔 구조를 통해서 동시 다발적으로 발생하여 접근하는 위협 표적을 빠르고 정확하게 탐지하는 방식을 제안한다. 본 논문에서 제안된 기법들은 시뮬레이션을 통해서 표적의 탐지 정확도 성능을 제시한다.