• Journal of Korea Multimedia Society
• /
• v.10 no.1
• /
• pp.49-57
• /
• 2007

Recently, CMOS RF integration has been widely explored in the wireless communication area to save cost, power, and chip area. The direct conversion architecture, rather than a more conventional super-het-erodyne, has been an attractive choice for single-chip integration because of its many advantages. However, the direct conversion architecture has several fundamental problems to solve in achieving performance comparable to a super-heterodyne counterpart. In this paper, we describe a programmable filter for mobile communication terminals using a direct conversion architecture. The proposed filter can be implemented with the active-RC filter and programmed to meet the requirements of different communication standards, including GSM, DECT and WCDMA. The filter can be tuned to select a detail frequency by changing the gate voltage of the MOS resistors. The gain of the proposed architecture can be programmed from 27dB to 72dB using the filter gain and VGA in 3dB steps.

• Journal of Navigation and Port Research
• /
• v.26 no.1
• /
• pp.127-136
• /
• 2002

This paper Presents a discussion on the design and realization for the Phase Sensitive Defector (PSD) circuitry of Flu$\chi$-gate Compass that gives direction information to the Directional Frequency Analysis and Recording (DIFAR) Sonobuoy in Air Anti-Submarine Warfare. PSD circuitry is realized with Twin-T RC networked active band-pass filter. Results of a performance test the PSD circuitry shows that the effectiveness of band-pass filtering of desired $2F_0$ second harmonic signal, which is Pro- portional to the direction of earth's magnetic field. This resulted in the extraction of direction information.

• Journal of the Institute of Electronics Engineers of Korea SD
• /
• v.46 no.3
• /
• pp.51-59
• /
• 2009

This paper presents the design of continuous-time sigma-delta modulator for acoustic sensor. The feedforward structure without summing block is used to reduce power consumption of sigma-delta modulator. A high-linearity active-RC filter is used to improve resolution of sigma-delta modulator. Excess loop delay problem in conventional continuous-time sigma-delta modulators is solved by our proposed architecture. A low power, high resolution fourth-order continuous-time sigma-delta modulator with 1-bit quantization was realized in a 0.13-${\mu}m$ 1-Poly 8-metal CMOS technology, with a core area of $0.58\;mm^2$. Simulation results show that the modulator achieves 91.3-dB SNR over a 25-kHz signal bandwidth with an oversampling ratio of 64, while dissipating $290{\mu}W$ from a 3.3-V supply.

• Journal of the Korean Institute of Telematics and Electronics B
• /
• v.31B no.12
• /
• pp.45-50
• /
• 1994

The elliptic filters are optimal in the sense that the magnitude characteristic exhibits the steepest slope at the cutoff frequency. The other characteristics such as delay and step response, however, are rather undesirable. In this paper, the modified elliptic low-pass filter function is proposed. The modified elliptic function possesses progressively diminishing ripples in both passband and stopband, and the lower pole-Q, values when compared to the elliptic counterparts, thus producting the flatter delay characteristics and improved time-domain performances. And it is realizable in the doubley-terminated ladder structures for the order n even or odd, thus lending themselves amaenable to high-quality active RC or switched capacitor filters through the simulation techniques.

• Proceedings of the KIEE Conference
• /
• 1995.07a
• /
• pp.315-317
• /
• 1995

A simple drive circuit without position sensors for a switched reluctance motor is presented. The turn on and turn off points are determined by detecting the rate of change of the active phase current. The drive circuit consists of a current sensing resistor, RC filter, comparator, OP Amp, and OR gates. It is verified through the experiments that the switched reluctance motor with the proposed sensorless drive circuit is well operated in wide speed ranges.

• Journal of rehabilitation welfare engineering & assistive technology
• /
• v.7 no.2
• /
• pp.7-12
• /
• 2013

In this paper, we propose a brushless DC motor drive system for active knee prosthesis and low-cost estimation method for phase current from DC-link current. To control motor torque directly, current sensing is very important and current sensing point should be synchronized with voltage switching command to minimize the effect of switching noise in current measurement, For maintaining small form factor, simplifying control schemes and achieving low-cost system, control schemes using DC-link current are used. Moreover, we incorporated phase current estimation method using analog MUX for minimizing current estimation error between DC-link current and phase current. The validity of the proposed system is verified through experimental works.

• Journal of the Korea Institute of Information and Communication Engineering
• /
• v.17 no.3
• /
• pp.685-690
• /
• 2013

This paper has proposed a multi-channel and wide gain-range baseband circuit blocks for the IEEE 802.15.4g MR-OFDM SUN systems. The proposed baseband circuit blocks consist of two negative-feedback VGAs, an active-RC 5th-order chebyshev low-pass-filter, and a DC-offset cancellation circuit. The proposed baseband circuit blocks provide 1 dB cut-off frequencies of 100 kHz, 200 kHz, 400 kHz, and 600 kHz respectively, and achieve a wide gain-range of +7 dB~+84 dB with 1 dB step. In addition, a DC-offset cancellation circuit has been adopted to mitigate DC-offset problems in direct-conversion receiver. Simulation results show a maximum input differential voltage of $1.5V_{pp}$ and noise figure of 42 dB and 37.6 dB at 5 kHz and 500 kHz, respectively. The proposed I-and Q-path baseband circuits have been implemented in $0.18-{\mu}m$ CMOS technology and consume 17 mW from a 1.8 V supply voltage.

• 한국생물공학회:학술대회논문집
• /
• 2005.04a
• /
• pp.37-37
• /
• 2005

Human chorionic gonadotropin (hCG) is a heterodimeric glycoprotein hormone consisting of non-covalently linked two subunits, the ${\alpha}$ and ${\beta}$ subunit. It has been used as a infertility drug for ovulation to mimic luteinizing hormone $(LH).^{1)}$ A stable cell line was established by transfection of Rc/CMV-i-dhfr-hCG, expression vector containing hCG ${\alpha}-$ and ${\beta}-genes$, into dihydrofolate reductase-deficient CHO cells and subesquent methotrexate-mediated gene amplification. Anchorage-dependent CHO cells were adapted into a serum-free and/or animal component-free suspension medium through gradual serum weaning for the hCG production. The established cell line showed typical morphological characteristics and growth profile of CHO cells, and could produce FSH with passage-to-passage consistency. The high density perfusion culture of the CHO cells was carried out in Celligen Plus bioreactor equipped with a spin-filter as a internal cell retention device. The cell density reached up to $>1x10^{7}$ cells/ml in less than 7 days and a perfusion-control strategy based on cellular consumption rates of glucose was $established.^{2)}$ Biologically active recombinant hCG was purified by a series of chromatographic steps including anion exchange chromatography and hydrophobic interaction chromatography to homogeneity. The highly purified recombinant hCG was characterized for physicochemical, immunological and biological properties.

• Journal of the Institute of Electronics Engineers of Korea SD
• /
• v.42 no.1
• /
• pp.47-55
• /
• 2005

This work describes an 8b 240 MS/s CMOS ADC as one of embedded core cells for high-performance displays requiring low power and small size at high speed. The proposed ADC uses externally connected pins only for analog inputs, digital outputs, and supplies. The ADC employs (1) a two-step pipelined architecture to optimize power and chip size at the target sampling frequency of 240 MHz, (2) advanced bootstrapping techniques to achieve high signal bandwidth in the input SHA, and (3) RC filter-based on-chip I/V references to improve noise performance with a power-off function added for portable applications. The prototype ADC is implemented in a 0.18 um CMOS and simultaneously integrated in a DVD system with dual-mode inputs. The measured DNL and INL are within 0.49 LSB and 0.69 LSB, respectively. The prototype ADC shows the SFDR of 53 dB for a 10 MHz input sinewave at 240 MS/s while maintaining the SNDR exceeding 38 dB and the SFDR exceeding 50 dB for input frequencies up to the Nyquist frequency at 240 MS/s. The ADC consumes, 104 mW at 240 MS/s and the active die area is 1.36 ㎟.

• Journal of the Korean Society of Food Science and Nutrition
• /
• v.46 no.10
• /
• pp.1164-1170
• /
• 2017

Protaetia brevitarsis larvae (PBL) has recently been registered as a temporary food in Korea, and this study evaluated the application potential of PBL proteins as health functional food materials. Protein hydrolysates were prepared from PBL powder by enzymatic hydrolysis using five different proteases (alcalase, bromelain, flavourzyme, neutrase, and papain), and based on the results from the peptide content and SDS-PAGE analyses, PBL treated with alcalase or flavourzyme showed a high degree of hydrolysis (HD) value, whereas the HD value of those treated with neutrase, bromelain, or papain was minimal. The protein hydrolysates showing a high HD value were separated further into the fractions of >3 kDa and <3 kDa by a centrifugal filter system and then lyophilized, and according to the $RC_{50}$ values of the protein hydrolysates (<3 kDa) obtained from three different antioxidant analyses; the alcalase hydrolysates showed the highest antioxidant activity. Therefore, the alcalase hydrolysates were tested further for their inhibitory effects on the peroxidation of linoleic acid by measuring the thiobarbituric acid values. The results showed that the peroxidation of untreated linoleic acid increased dramatically during 6 days of incubation, but a pretreatment with the hydrolysates ($100{\sim}800{\mu}g/mL$) significantly inhibited the linoleic acid peroxidation in a dose-dependent manner for 6 days. Our current studies are focused on the identification of active peptide sequences from alcalase hydrolysates.