• 제목/요약/키워드: acting-out problem

검색결과 39건 처리시간 0.029초

조타장치 제어에 의한 횡동요 감소 효과 (Effects for reduction of roll motion by the control of steering gear)

  • 최찬문;이창헌;안장영;요시무라 야스오
    • 수산해양기술연구
    • /
    • 제47권1호
    • /
    • pp.37-45
    • /
    • 2011
  • Reduction of ship's rolling is the most important performance requirement for improving the safety of the crew on board and preventing damage to cargo as well as improving the comfort of the ride. It is a common experience for mariners, to see that steering with a rudder generally induces rolling of the ship, though the original aim of the rudder is to keep the ship's heading to the required course. At the first stage, when a rudder is steered, usually a ship heels in an inward direction, due to the roll moment acting on the rudder. At the next stage in steering, the main heel may change to an outward. This coupling between rudder and roll motion has become an attractive problem from the point of view of roll stabilization using the rudder, because it is a natural in sight that if the rudder action is skillfully related to the change of roll as well as to the course deviation, the roll can be reduced to a certain degree. The main aim of this paper is to discuss the results of the actual full-scale sea trials carried out on steer gear No.1 and No.1 2, the individual quartermaster and to make clear their statistical properties, using the actual data which included measurement of roll angle, roll rate and the comparative tests were carried out immediately after each other, in order to minimize any statistical variation in sea conditions. It can be concluded that the steer gear No. 1 2 reduced the roll motion on average by about 21% in comparison with the No.1 and confirmed the some difference as per a ability of quarter-master's maneuver.

회전익 항공기의 와이퍼 암 형상변경을 통한 비행 안전성 향상 (Improvement of Flight Safety on Configuration Change of Rotorcraft Wiper Arm)

  • 김대한;이윤우;안정민;박재호
    • 한국산학기술학회논문지
    • /
    • 제18권6호
    • /
    • pp.736-741
    • /
    • 2017
  • 본 논문은 회전익 항공기의 와이퍼 시스템의 설계 개선에 관한 연구이다. 국내 회전익 항공기의 우천환경 운용 시, 와이퍼 닦임 성능 저하 및 떨림 현상이 발생하였다. 와이퍼 시스템은 크게 와이퍼 암 조립체, 전동기, 와이퍼 변환기 조립체, 플랙스 드라이브로 구성되며, 와이퍼 시스템에 문제가 발생하면 우천환경의 작전에 제한사항이 발생하여 작전능력이 감소한다. 이러한 와이퍼 시스템의 문제를 야기한 원인은 크게 2가지로 검토되었으며, 첫번째 사유는 항공기 기동조건에서 와이퍼 암에 작용하는 부상력 때문이며, 두번째는 구성품들의 과다한 유격 때문이다. 이 2가지 문제를 개선하기 위해서 본 연구가 수행되었으며, 4가지의 와이퍼 구성품 중 와이퍼 암을 개선하였다. 개선 내용으로는 와이퍼 암의 누름압(스프링 장력) 증가, 기어 공차 개선, 재질 및 형상 변경이 수행되었다. 개선형상의 검증은 구성품 단위 내구성 시험, 항공기 지상 시험, 비행 시험이 수행되었으며, 설계 개선된 와이퍼 암을 장착하였을 시 닦임 성능 및 유격문제가 해소된 것을 확인 할 수 있었다. 닦임성능은 육안으로 확인하였으며, 유격문제는 와이퍼 작동거리를 측정하여 확인하였다. 현재 국내 회전익 항공기는 개선 형상을 적용하여 문제없이 운용하고 있으며, 이러한 설계 개선 과정은 향후 회전익 항공기 개발 시 유용한 참고자료가 될 것이다.

구조방정식을 이용한 치과위생사의 감정노동과 직무특성이 직무스트레스와 이직의도에 미치는 영향 (Effects of emotional labor and job characteristics on job stress and turnover intention in dental hygienists using the structural equation model)

  • 최부근;김진수;하미나
    • 한국치위생학회지
    • /
    • 제18권1호
    • /
    • pp.31-42
    • /
    • 2018
  • Objectives: This study aims to alleviate dental hygienists' job stress caused by emotional labor, lower their turnover rate, improve the working environment, and offer better quality of services by understanding correlations among emotional labor, job characteristics, job stress, and turnover intention. Methods: A survey was conducted in the subjects with dental hygienists who were working at general hospitals, dental university hospitals, and private dental clinics located in Seoul, Gyeonggi, and Chungnam by the convenience sampling method from June 1 through 30, 2017, and the collected data were analyzed using by SPSS Windows Ver. 22.0 (IBM CO, Armonk, NY, USA) and AMOS 21. As the statistical analysis methods, convergent validity test, structural equation model analysis and model goodness of fit were conducted using independent samples t-test, one-way ANOVA, path analysis, and confirmatory factor analysis. Results: It turned out that the more dental hygienists' deep acting of emotional labor and the more their workload of job characteristics, the higher their job stress got, and that the higher their job stress, the higher their turnover intention got. Conclusions: As a method of lowering dental hygienists' turnover intention, they may resolve emotional disharmony with their own problem-solving method, but it is necessary to develop and support organizational culture for the improvement of working environment. Dental hygienists' organizations should implement the measures to minimize their turnover rate and job stress level by allocating appropriate workload.

상한치 이론에 근거한 터널 막장의 안정성 연구 (Evaluation of tunnel face stability based on upper bound theorem)

  • 이인모;이재성;남석우
    • 한국터널지하공간학회 논문집
    • /
    • 제5권1호
    • /
    • pp.3-11
    • /
    • 2003
  • 터널 시공 시 막장의 안정은 주요 관심사이다. 그러나, 터널 지보재에 비해 상대적으로 터널 막장의 안정성 문제는 그리 많은 연구가 이루어지지 않은 실정이다. 또한 지하수위 하에서 터널 시공 시 터널 내로 지하수 흐름에 의해 발생된 침투수력은 막장의 안정성에 큰 영향을 미칠 수 있다. 본 논문에서는 두 가지 요소를 고려하여 터널 막장의 안정성을 평가하였다. 하나는 극한이론 중 상한치 이론으로 산출된 유효응력이며, 다른 하나는 정상류 흐름조건에서 수치해석으로부터 산출된 침투수력이다. 열악한 지반조건에서 터널 시공 시 터널의 안정과 인접 구조물의 손상을 방지하기 위해 보조공법이 적용된다. 강관 다단 그라우팅 공법은 근래 국내에서 적용되고 있는 보조공법 중의 하나이다. 본 논문에서는 강관 다단 그라우팅으로 보강된 터널의 막장 안정성도 함께 평가되었다.

  • PDF

녹내장 치료용 능동형 압력조절밸브(Implant) 모델링 및 설계 (Modeling and Design of an Active Pressure Regulating Valve(Implant))

  • 배병훈;김낙훈;이연;기홍석;김선호;박기환
    • 대한기계학회논문집A
    • /
    • 제25권5호
    • /
    • pp.805-815
    • /
    • 2001
  • Glaucoma is an eye disease which is caused by abnormal high IOP (Intra Ocular Pressure). High IOP is caused by the aqueous humor which is produced consistently but not drained due to malfunction of the trabecular system which has a role of draining the aqueous humor into the venous system. Currently, there are three methods to treat glaucoma-using medicines, surgical operation, and using implant device. The first and second methods are not long acting, so the use of implants is increasing in these days in order to drain out the aqueous humor compulsory. However, though conventional implants have a capability of pressure regulation, they cannot maintain IOPs desired for different patients, and too much aqueous humor are usually drained, to cause hypotony. To solve these problems, it is needed to develop a new implant which is capable of controling the IOP actively and copes with personal difference of patients. An active glaucoma implant consists of the valve actuator, pressure sensor, controller, and power supply. In this paper, firstly, we make an analysis of the operation of a conventional implant using a bond graph and show defects and limitations of the conventional valve analytically. Secondly, we design and analyze a valve actuator considering actuation principles, resistance elements, control methods, and energy sources focused on power saving problem. Finally, using simulations the possibility of the proposed valve actuator is investigated.

유한 요소법을 이용한 축대칭 하이드로 미케니칼 디프 드로잉 공정의 해석 (Analysis of the Axisymmetric Hydro-Mechanical Deep Drawing Process by Using the Finite Element Method)

  • 양동열;김한경;이항수;김경웅
    • 대한기계학회논문집
    • /
    • 제16권5호
    • /
    • pp.873-882
    • /
    • 1992
  • 본 연구에서는 축대칭 형상의 하이드로 미케니칼 디프드로잉 공정을 강소성 유한요소법으로 해석하는 것이다. 본 논문에서는 Fig.1에서 보이는 바와 같은 경우 에 대하여 평두 펀치(flat headed punch)를 사용한 공정을 강소성 유한요소법으로 해 석하였으며 펀치 행정에 따른 챔버내의 압력 및 플랜지부의 압력분포를 구하였다. 접촉부의 처리는 플랜지부의 압력분포를 구하였다. 접촉부의 처리는 Yang등이 제안 한 방법을 적용하였다. 이론해석의 타당성을 알아보기 위하여 금형을 설계, 제작하 고 실험을 수행하여 결과를 비교 검토하였다.

지구과학 영재들의 소집단 활동에서 의사소통 구조와 집단 내 지위에 따른 언어적 상호 작용의 차이 (The Differences of Verbal Interactions according to Communication Structures and Communication Status in Small Group Activity of Earth Science Gifted Students)

  • 정덕호;이철민;박경진
    • 한국지구과학회지
    • /
    • 제41권3호
    • /
    • pp.307-319
    • /
    • 2020
  • 이 연구의 목적은 소집단 활동에서 의사소통 구조와 집단 내 지위에 따라 지구과학 영재들의 언어적 상호 작용에 차이가 있는지를 알아보기 위한 것이다. 이를 위하여 지구의 밀도를 측정하는 소집단 탐구 활동을 실시하였으며, 이 과정에서 소집단 간의 의사소통 구조가 서로 다른 공유형 집단 4개, 독점형 집단 4개 등 8개 소집단을 선정하였다. 이후 언어적 상호작용을 분석하기 위한 분석틀을 개발하여 소집단 간의 특성 차이를 비교하였으며, 그 결과는 다음과 같다. 첫째, 의사소통 구조에 관계없이 모든 소집단에서 학생들은 핑퐁(pingpong)형의 단순한 의사소통 구조를 보이고 있었다. 둘째, 소집단의 의사소통 구조 및 집단 내 지위에 관계없이 모든 소집단에서 '제재', '지시', '불만', '자신감 부족'과 같은 부정적인 상호작용이 우세하게 나타났다. 셋째, 소집단 내의 방관자의 지위에 있는 학생들은 상대방에게 지시하는 행동, 상대방의 행동을 저지하는 행동, 그리고 구성원의 태도나 능력에 대한 불만 표현 등의 언어적 상호 작용을 주로 보이고 있었다. 그러므로 교사는 소집단 활동에서 학생들이 상위 수준의 언어적 상호 작용을 구사하도록 지도해야 하고, 부정적 상호 작용이 발생하지 않도록 학생들의 의사소통에 관여해야 한다. 또한 교사는 사전에 소집단 내 방관자의 지위에 있는 학생들에 대한 성취 수준을 확인하고 이들이 소집단 활동에 보다 적극적으로 참여할 수 있도록 지도할 필요가 있다. 이 연구는 학생들의 문제 해결 능력과 의사소통 능력을 향상시키기 위한 교수학습 설계에 활용될 수 있다는 점에서 의의가 있다.

임플란트 경부형상이 주위골 응력에 미치는 영향에 관한 유한요소법적 분석 (Finite element analysis of peri-implant bone stress influenced by cervical module configuration of endosseous implant)

  • 정재민;조광헌;이청희;유원재;이규복
    • 대한치과보철학회지
    • /
    • 제47권4호
    • /
    • pp.394-405
    • /
    • 2009
  • 연구목적: 임플란트 경부의 치은관통부 형상이 주위골 응력분포에 미치는 영향에 대해 조사하고자 한다. 연구재료 및 방법: 높이 2.8 mm, 상부 직경 4 mm, 하부 직경 2.7 mm 인 직선형 치은관통부를 가지는 ITI의 일체형(one piece) 임플란트 (Straumann, Waldenburg, Switzerland)를 Base Model로 사용하여, 치은관통부 외형에 함몰부를 부여하여 곡선형으로 수정한 4개의 해석 모델 (Model-1, -2, -3, -4)을 설정하였다. Base Model을 포함, 모두 5개의 경우에 대해 축대칭 유한요소모델링을 통해 임플란트 장축에 평행인 수직 방향과 임플란트 장축에 $30^{\circ}$ 경사진 방향으로 각각 50 N의 힘이 작용할 때 발생되는 임플란트 주위골의 응력을 해석하여 비교하였다. 체계적인 응력비교를 위해 임플란트 주위에 19개의 절점을 응력 관찰점으로 선정하였으며, 경부 치밀골에 설정된 5개 관찰점의 응력으로부터 회귀분석법으로 임플란트/골 사이에서 생기는 최대응력값을 추정하여 정량적인 비교를 실행하였다. 결과: 최대 골응력은 치은관통부가 직선인 기본모델에서 가장 컸으며, 치은 관통부를 곡선으로 설계한 경우 응력이 감소되었다. 치은 함몰부가 클수록 응력감소 정도가 커졌으며 함몰부의 수직위치가 몸체부에 가장 가까운 Model-4에서 응력감소 정도가 전체의 약5%로 가장 컸다. 결론: 임플란트의 경부 형상은 골응력에 영향을 미치며, 이를 곡선형으로 함으로써 또한 그 함몰부를 몸체부에 근접하게 함으로써 경부골 응력감소를 효과적으로 도모할 수 있다.

환경 인쇄 기술의 발전과 인쇄물의 $CO_2$ 발생량에 관한 연구 (A Study about Development of Environment Printing Technology and $CO_2$)

  • 이문학
    • 한국인쇄학회지
    • /
    • 제30권3호
    • /
    • pp.89-114
    • /
    • 2012
  • For as to world, the concern about the environment problem is enhanced than any other time in the past because of being 21 century. And the environment problem is highlighted as the world-wide issue. The time of the environment problem intimidates the alive of the mankind and presence of an earth over the time. It becomes the essentiality not being selection in the personal living or the economical viewpoint now to prepare for the climatic modification. As to the company management, the green growth period which it excludes the environment management considering an environment, cannot carry on the company the continued management comes. That is, in the change center of the management paradigm, there is the environment management. Nearly, the greenhouse gas which the publication industry is the environmental toxic material like all industries is generated. The greenhouse gas is ejected in the process of running the manufacturing process and print shop of the various kinds material used as the raw material of the book. Particularly, the tree felling for getting the material of the paper is known to reach the direct influence on the global warming. This study does according to an object it considers and organizes the environment parameter based on this kind of fact as to the publication industry. And it is determined as the reference which is used as the basic materials preparing the case that carbon exhaust right transaction(CAP and TRADE) drawing are enforced in all industries and is sustainable the management of the publication industry and reduces the environmental risk among the company many risk management elements and plans and enforces the publication related policy that there is a value. In the printing publication industry, this study tried to inquire into elements discharging the environmental pollutant or the greenhouse gas. Additionally, in the printed publication production process, it tried to inquire into the effort for an environment-friendly and necessity at the printing paper and the printers ink, regarded as the element discharging the greenhouse gas all kinds of the printing materials, operation of the print shop and all kinds of the machines and recycle process, and etc. These considerations make these industrial field employees aware of the significance about a conservation and environmental protection. They try to give a help in the subsequent study producing quantitatively each environmental parameter emission of green house gas. This makes the calculation of the relative $CO_2$ output reproached ultimately possible. Meanwhile, in a sense, many research protects and improving an environment in connection with the contents of research at the printing publication industrial field is in progress. There will be the voluntary human face that it has to protect an environment but this can not do by the outside factor according to all kinds of environment related law and regulation. Anyway, because of acting on company management as the factor of oppression, the increase of this environment-related correspondence cost could know that the research that the environment loading relates with a procurement and development, environment management system introduction, quality control standard, including, normalizing including a material, and etc. through the part of the effort to reduce the cost low was actively in progress. As to the green growth era, as follows, this paper prescribed the subject and alternative of the print publication industry. It is surrounded by the firstly new digital environment and the generation of the subject. And secondly the printing industry is caused by the point of time when the green growth leaves by the topic which is largest in the global industry and it increases. The printing publication industry has to prepare the bridgehead for the environment-friendly green growth as the alternative for this resolution with first. The support blown in each industry becomes the obligation not being selection. Prestek in which the print publishing was exposed to spend many energies and which is known as the practice of the sustainable print publishing insisted that it mentioned importance of the green printing through the white pages in 2008 and a company had to be the green growth comprised through the environment-friendly activity. The core management for the sustainable printing publication industry presented from Presstack white pages is compacted to 4 words that it is a remove, reduce, recover, and recycle. Second, positively the digital printing(POD) system should be utilized. In the worldwide print out market, the digital printing area stops at the level of 10% or so but the change over and growth of the market of an analog-to-digital will increase rapidly in the future. As to the CEO Jeff Hayes of the Infoland, the offset print referred to that it of the traditional method got old and infirm with the minor phase of the new printing application like the customer to be wanted publication and the print of the digital method led the market. In conclusion, print publishers have to grasp well the market flow in the situation where a digitalization cannot be generalized and a support cannot avoid. And it keeps pace with the flow of the digital age and the recognition about the effort for the development and environment problem have to be raised. Particularly, the active green strategy is employed for the active green strategy.

퇴적 침전구에서 발생하는 내면파 유동에 의한 유체력 해석 (Numerical Computations on the Hydrodynamic Forces by Internal Waves in a Sediment Pocket)

  • 경조현;김장환;배광준
    • 한국해양환경ㆍ에너지학회지
    • /
    • 제7권4호
    • /
    • pp.192-198
    • /
    • 2004
  • 해안 근처에서는 해수보다 무거운 진흙 등으로 채워진 퇴적 침전구가 존재한다. 이러한 퇴적 침전구 내에서는 해양으로부터 들어오는 입사파에 의해 내면파 유동이 발생할 수 있다. 본 논문에서는 내면파 유동이 존재하는 퇴적 침전구 내에 위치한 물체에 발생하는 2차원 내면파 문제에 대한 수치기법을 개발하였다. 수학적 정식화 과정으로 유체 영역을 포텐셜 유동으로 가정하였으며, 자유표면에 대한 경계조건은 선형화된 자유표면 경계조건을 사용하였다. 수치 기법으로는 국소 유한 요소법을 사용하였다. 사용된 국소 유한 요소법은 기지의 함수 집합을 사용하여 방사 경계조건을 엄밀히 만족함으로써 계산 영역을 작게 줄일 수 있는 장점이 존재한다. 개발된 수치 기법의 검증을 위하여 Schwingers의 범함수법을 이용한 Lassiter의 계산 결과와 비교하였으며, 서로 잘 일치함을 확인하였다. 계산 예로서는 퇴적 침전구내에 형성된 내면파면 위에 존재하는 파이프라인이 입사파에 비해 유기 되는 힘을 계산하였다.

  • PDF