• 한국항행학회논문지
• /
• 제11권2호
• /
• pp.163-169
• /
• 2007

본 논문에서는 x-ray 영상시스템의 영상을 획득하기 위하여 x-ray 발생기와 영상획득시스템 사이의 동기를 맞추어 주는 트리거 발생기를 연구분석 하였다. 무선 트리거 발생기는 디지털영상 획득시스템으로부터 영상획득의 시작을 지시할 수 있는 ACQ_START 신호와 영상획득의 끝을 알리는 ACC_END 신호를 발생시킬 수 있도록 설계하였다. 디지털 영상의 획득은 ACQ_START 신호와 ACQ_END 신호 사이의 시간동안에만 정확하게 이루어지며 무선 원격 x-ray 신호의 검출을 통하여 유선통신 프로토콜 없이 정확한 x-ray 영상의 획득이 가능하고 20 mAs 의 x-ray 레벨에서 3.5 line pair /mm 분해능을 나타냄을 확인하였다.

• 한국전자파학회논문지
• /
• 제11권5호
• /
• pp.723-730
• /
• 2000

이 논문은 Rayleigh 페이딩 채널환경에서 가산 백색 가우시안 잡음 제거 필터를 적용한 직렬 탐색 동기 획득 방식에 대한 성능을 분석하고, 임계치를 페이딩 정도에 따라 변화시킬 수 있도록 참조 필터를 추가하여 페이딩 환경에서 강인하게 동기 획득이 이루어지도록 하였다. 성능 분석을 위해 사용된 채널 모델은 JAKE 모델이며 성능분석 결과, 제안된 동기 획득 방식이 기존의 직렬 탐색동기 획득 방식과 수신된 신호에 대한 칩별 연속 평균을 구해 페이딩에 의한 감쇄요소를 보상하는 가산 백색 가우시안 잡음 제거 필터만을 적용한 동기 획득 방식보다 낮은 신호대잡음비에서 평균 동기 획득 시간이 줄어듬을 알 수 있었다.

• 한국항해항만학회:학술대회논문집
• /
• 한국항해항만학회 2006년도 International Symposium on GPS/GNSS Vol.2
• /
• pp.107-112
• /
• 2006

The previous acquisition method of GPS receiver for reference station adopts not only the coherent integration method but also the non-coherent integration method in order to enhance sensitivity under noisy environment. However, under noisy environment, the previous GPS signal acquisition method causes the non-coherent integration loss which is a major factor among losses that can be caused during GPS signal acquisition. The non-coherent integration loss also increases with the strength of the received noise. This paper has intention of analyzing the performance of the GPS signal acquisition method proposed to effectively enhance sensitivity of DGPS reference receiver under noisy environment. This paper presents that the proposed GPS signal acquisition method suppresses the non-coherent integration loss through post-processing simulation. Furthermore, with regard to the mean acquisition time, it is shown that the number of search cells of the proposed GPS signal acquisition method is much fewer than that of the previous GPS signal acquisition method.

• Journal of Multimedia Information System
• /
• 제8권2호
• /
• pp.93-100
• /
• 2021

Under the time-varying temperature, the high-temperature radiation of forgings and the change of reflection characteristics of oxide skin on the surface of forgings lead to the difficulty of obtaining images to truly reflect the geometric characteristics of forgings. It is urgent to study the clear and reliable acquisition method of hot forging feature image under time-varying temperature to meet the requirements of visual measurement of hot geometric parameters of forgings. Based on this, this chapter first puts forward the quality evaluation method of forging feature image, which provides guarantee for the accurate evaluation of feature image quality. Furthermore, the factors that affect the image quality, such as the radiation characteristics of forgings and the photographic characteristics of cameras, are analyzed, and the imaging spectrum which can effectively suppress the radiation intensity of forgings is determined. Finally, aiming at the problem that the quality of image acquisition is difficult to guarantee due to the drastic change of radiation intensity of forgings under time-varying temperature, an image acquisition method based on minimum signal-to-noise ratio (SNR) based laser light intensity adaptation is proposed, which significantly improves the definition of feature light strips in forging images at high temperature, and finally realizes the clear acquisition of feature images of large-scale hot forging under time-varying temperature.

• 전기학회논문지P
• /
• 제59권1호
• /
• pp.71-76
• /
• 2010

This paper is focused on implementing a real-time data acquisition system that checks power facility status by applying network based technology to Urban Transit substation power facilities and the results of its on-field tests. This system is composed of a sensor part, a measurement part, a transceiver part, a host computer, and a power source part. The system is designed to collect, save, analyze, and display the online state power facility AI (Analog Input). This system measures voltage and current from positive feeders and negative feeders where it is possible to check abnormalities of the substation‘s main power facilities. By monitoring abnormal data of the Urban Transit power facilities real-time and analyzing stored data, establishing procedures of optimized maintenance is possible.

• Nuclear Engineering and Technology
• /
• 제43권2호
• /
• pp.99-104
• /
• 2011

A Structure Health Monitoring (SHM) system needs a real-time remote data acquisition system to monitor the status of a structure from anywhere via Internet access. In this paper, we present a data acquisition system that monitors up to 40 Fiber Bragg Grating Sensors remotely in real-time. Using a TCP/IP protocol, users can access information gathered by the sensors from anywhere. An experiment in laboratory conditions has been done to prove the feasibility of our proposed system, which is built in special-purpose monitoring system.

• 대한전자공학회:학술대회논문집
• /
• 대한전자공학회 2000년도 추계종합학술대회 논문집(1)
• /
• pp.65-68
• /
• 2000

In CDMA, the currently used PN code acquisition methods detect the phase of the incoming PN signal on the basis of ML estimation. In serial search strategy, it takes relatively long time for PN code acquisition. A study related to reduce processing time of PN code acquisition is important. Therefore we propose a reference code design for a new algorithm that a reference code and the received PN code are fully correlated to detect the transmitted PN code, in detail, the relative phase offset j of c⒡. After choosing two weight factors, we show the mathematical analysis and derivation for the reference code design.

• 대한전자공학회:학술대회논문집
• /
• 대한전자공학회 2005년도 추계종합학술대회
• /
• pp.285-288
• /
• 2005

In this paper, we propose a two step Binary Exponential search algorithm for rapid acquisition time of UWB(Ultra Wide Band) signal on UWB communication systems. Previous proposed timing acquisition algorithm is searching whole frame that consist of the number of n Bins to terminate search, however this paper proposed two step Binary Exponential search algorithm can achieve remarkable reduction of UWB signal acquisition time as limiting search group. Proposed search algorithm is consisting of search group establishment step and Bit Reversing of search group establishment step.

• 한국통신학회논문지
• /
• 제21권5호
• /
• pp.1230-1239
• /
• 1996

This paper analyzes matched-filter acquistion performance of a direct-sequence spread-specturm multiple-access system in a Rayleigh fading channel. For an application of multiple access system, multiple access interference is considered in the performance analysis. A signal flow graph technique is used to derive mean acquisition time in terms of detection and false alarm probabilities. As aresult of performance analysis, it is shown that mean acquisition time increases as fading rate becomes faster andthe numbre of users increases, and it decreases as a matched-filter length becomes logner. The variation of parameter values hs much influence on acquisition performance as SNR/chip becomes smaller.

• 제어로봇시스템학회논문지
• /
• 제17권1호
• /
• pp.61-67
• /
• 2011

The GPS new civil signal is modulated on the L2 carrier at a frequency of 1227.6MHz. The L2C signal is composed of two multiplexed code signals, which include CM code with a 10,230 chip sequency repeating every 20ms, and CL code which has a 767,250 chip sequency repeating every 1.5 seconds. Thus, the new civil signal have much improved cross correlation properties so that the position fixing can be possible even with very weak signals. However, it requires very long acquisition time because of its long code length. This paper presents an efficient signal acquisition method for L2C AGPS receiver. Snapshot mode and coarse time assistance are assumed and total integration time is given by 1.5 sec. By SNR worksheet and computer simulation, it is proven that L2C signal can be acquired with very weak power less than -150dBm. Considering the acquisition time and the sensitivity, it is recommended that the highest power signal is acquired with CM code first to reduce TTFF. By the timing synchronization, at this time, search space of the code phase for other signals can be greatly reduced so that CL code can be used in signal acquisition to maximize sensitivity with small computation.