• The Journal of the Acoustical Society of Korea
• /
• v.23 no.3
• /
• pp.197-205
• /
• 2004

This paper represents the results of interpretation on the cause of sign changing of the striation slopes appearing in the range-frequency domain spectrogram of ship-radiated noise measured in a shallow sea. Striation patterns and dispersion characteristics simulated from a numerical model based on mode theory at various seabed conditions show that the sign changing of the striation slopes appearing in measured signal is caused by the shear property of seabed. more specifically by the shear property of the basement lying below the sediment which is estimated about 3±1m thick.

• Journal of the Korean Wood Science and Technology
• /
• v.27 no.3
• /
• pp.7-16
• /
• 1999

This research was carried out to compare structure, equilibrium moisture content(EMC), adsorption and acoustical properties between 4 retention levels of saligenin(o-hydroxybenzyl alcohol) treated, heat-treated and untreated chestnut(Castanea crenata S. et Z.) and paulownia(Paulownia spp.) woods. The cell structures of untreated wood and heat-treated wood were not different but the cell wall of saligenin treated wood was thicker than that of untreated wood for both species. EMC of untreated wood was the highest, next was that of heat-treated wood, and that of saligenin treated wood was the lowest, and among saligenin treated woods, EMC was decreased as retention level increased for both species. Adsorption curves were parabolically increased. Acoustical properties of saligenin treated wood were most improved, and the next were those of heat-treated wood. Comprehensive acoustical property was improved at retention level 20% and 30% for chestnut wood, and at retention level 80% for paulownia wood.

• Proceedings of the Korean Society for Noise and Vibration Engineering Conference
• /
• 2002.11b
• /
• pp.166-171
• /
• 2002

The transmission loss coefficient is very important acoustic property in parallel with absorption and acoustic impedance categorizing the acoustical materials, which can control the acoustical problems. At the same time, the transmission loss coefficient is a key parameter to choose the optimum material for the analysis of acoustical characteristics of material using SEA(Statistical Energy Analysis). In this paper, the transmission loss coefficient measurement system using 4-microphone impedance tube is proposed, based on the idea calculating the full transfer matrix of the acoustical sample to test. The theoretical background and measurement system are introduced, and finally the measurement results are verified.

• Proceedings of the Korean Society for Noise and Vibration Engineering Conference
• /
• 2002.11a
• /
• pp.323.1-323
• /
• 2002

The transmission loss coefficient is very important acoustic property in parallel with absorption and acoustic impedance categorizing the acoustical materials, which can control the acoustical problems. At the same time, the transmission loss coefficient is a key parameter to choose the optimum material for the analysis of acoustical characteristics of material using SEA(Statistical Energy Analysis). In this paper, the transmission loss coefficient measurement system usiong 4-microphone impedance tube is proposed, based on the idea calculating the full transger matrix of the acoustical sample to test. The theoretical backgroung and measurement system are introduced, and finally the measurement results are verified.

• Proceedings of the Korean Society for Noise and Vibration Engineering Conference
• /
• 2003.05a
• /
• pp.658-661
• /
• 2003

The transmission loss coefficient is very important acoustic property in parallel with absorption and acoustic impedance categorizing the acoustical materials, which can control the acoustical problems. At the same time, the transmission loss coefficient is a key parameter to choose the optimum material for the analysis of acoustical characteristics of material using SEA(Statistical Energy Analysis). In this paper, the transmission loss coefficient measurement system using 4-microphone impedance tube is proposed, based on the idea calculating the full transfer matrix of the acoustical sample to test. The theoretical background and measurement system are introduced, and finally the measurement results are verified.

• The Journal of the Acoustical Society of Korea
• /
• v.25 no.3
• /
• pp.101-106
• /
• 2006

In this study, the impedance behavior of micro-speaker had been investigated as a function of hole area existing on the grille. In order to theoretically study the change of acoustical property due to the different total hole area, the holes were treated as a short open pipe system, such as an orifice. This theoretical result was in an excellent agreement with the experimental one. In detail, the acoustic impedance to be caused by the hole could be greatly increased with the decrease of hole area. Therefore, it can be concluded that the acoustic property of micro-speaker could be greatly changed by increasing the acoustic impedance of hole with reducing hole area.

• The Journal of the Acoustical Society of Korea
• /
• v.14 no.5
• /
• pp.20-28
• /
• 1995

This paper studied adaptive blind equalizer which belong to Bussgang type. It is well known that blind equalizer performs equalization without using a training sequence. Especially, this paper concentrated on real time processing of them. The channel characteristic was obtained from measurements taken in a real urban multipath environment. A T/2 fractionally-spaced equalizer was used at the receiving end. Our computer simulations demonstrated that Stop and Go, Benveniste-Goursat, and optimal Bussgang algorithms have relatively low MSE property. CMA shows faster convergence property than any other of Bussgang type algorithm.

• Proceedings of the Acoustical Society of Korea Conference
• /
• 1993.06a
• /
• pp.259-262
• /
• 1993

In this paper, a new pitch beginning point detection method by extracting the G-peak, is proposed. By the speech production model, the area of the first peak on a pitch interval of speech signals is emphasized. By using the above characteristics, this method have more advantages than the others for pitch beginning point detection. The defective decision caused by an impulsive noise is minimized and the pre-filtering is not necessary for this method, because the integration of signals takes place in the process.

• The Journal of the Acoustical Society of Korea
• /
• v.17 no.3E
• /
• pp.53-57
• /
• 1998

Spectral information at a speech coder should be quantized with sufficient accuracy to keep perceptually transparent output speech. Spectral information at a low bit rate speech coder is usually transformed into corresponding line spectrum pair parameters and is often quantized with a vector quantization algorithm. As the vector quantization algorithm generally has high complexity in the optimal code vector searching routine, the complexity reduction in that routine is investigated using the ordering property of the line spectrum pair. When the proposed complexity reduction algorithm is applied to the well-known split vector quantization algorithm, the 46% complexity reduction is achieved in the distortion measure compu-tation.

• Proceedings of the Acoustical Society of Korea Conference
• /
• 1995.06a
• /
• pp.76-80
• /
• 1995

Differential pulse code modulation 구조의 Line spectrum pairs 양자화기에 높은 차수 LSP 파라미터 값은 낮은 차수 LSP 파라미터 값보다 커야한다는 LSP 파라미터의 순서화 특징을 이용하여 양자화하는 방법을 제시한다. 31 비트/프레임에서 1 dB 이하의 스펙트럴 왜곡을 갖는 명료한 음질을 보였다. 또한 LSP 주파수의 순서화 특성은 벡터-스칼라 결합 양자화기에 적용하였다. 벡터-스칼라 결합 양자화기에서는 26비트/프레임에서 명료한 음질을 보였다. 새로운 LSP 양자화 방법들은 전송에러 발생시 성능을 시험하고, 전송 에러에 강인하도록 프레임간 예측을 위해 Moving Average 예측기를 사용한다.