• 산업기술연구
• /
• 제22권A호
• /
• pp.43-48
• /
• 2002

Acoustic modes of a vehicle compartment dominate the noise characteristics of the vehicle system in the low frequency range. Vehicle compartments have head liner and air gap of proper thickness to mount a interior lamp, as well as to have a good sound insulation and absorption performance. This study estimates the acoustic modal property of the medium size passenger car by experiment and by finite element analysis and also, investigates the effect of the head liner on the acoustic mode of the passenger compartment to obtain useful information for low noise compartment design.

• 한국압력기기공학회 논문집
• /
• 제15권1호
• /
• pp.46-52
• /
• 2019

This work proposes a noncontact ultrasonic transducer for detecting wall-thinning of containment liner plates of nuclear power plants by measuring their thickness without physical contact. Because the containment liner plate is designed to prevent atmospheric leakage of radioactive substances under severe nuclear accident, its wall-thinning inspection is important for safety of nuclear power plants. Wall-thinning investigation of containment liner plates have been carried out by measuring their thickness with contact-type ultrasonic thickness gauge by inspectors and needs a lot of time and cost. As an alternative, an electromagnetic acoustic transducer measuring precisely thickness of containment liner plates without any physical contact or couplant was suggested in this research. A transducer generating and measuring shear ultrasonic waves in thickness direction was designed and wave field produced by the transducer was analyzed to verify the design. The working performance of the suggested transducer was tested with carbon steel plate specimens with various thicknesses. The test result shows that the proposed transducer can measure thickness of the specimens precisely without any couplant and implies that swift scanning of wall-thinning of containment liner plates will be possible with the proposed transducer.

• Advances in Computational Design
• /
• 제8권4호
• /
• pp.273-293
• /
• 2023

This study evaluated the acoustic performance of two configurations of serial HR arrays and lined HR arrays in the presence of grazing flow using a 3D numerical simulation. The dual, triple, and quad HR arrays were compared to the conventional HR array. The simulation results showed that the number of resonant frequencies increased with the number of serial HR arrays. The C_TL did not significantly change with the number of serial HR arrays. The acoustic performance of the two, three, and four-lined HR arrays was compared to the conventional HR array. The results showed that the resonant frequency and TLmax increased with the number of lined HR arrays. The C_TL also increased with the number of lined HR arrays. The effect of the grazing flow Mach number (M_a) was investigated on the four-lined HR array configuration and compared to the conventional HR configuration. TLmax and C_TL decreased for both configurations with increasing M_a. The four-lined HR array configuration had significantly better acoustic performance than the conventional HR configuration. The TLmax and C_TL increased by more than 300% when the configuration was changed from the conventional HR to the four-lined HR array at M_a = 0.The increment percentage decreased with increasing M_a.

• 비파괴검사학회지
• /
• 제32권4호
• /
• pp.401-409
• /
• 2012

초음파 시험은 접착계면에서 발생하는 미접착 결함을 검출할 수 있는 다른 비파괴 시험보다 미접착 검출 능력이 월등히 뛰어나다. 하지만, 스틸 연소관, 내열 고무, 라이너 및 추진제로 구성된 고체 추진기관은 각 재질의 음향 임피던스의 큰 차이와 반사파의 중첩 때문에 초음파 신호를 분석하기에는 많은 어려움 있다. 그러므로 고체 추진기관의 미접착 결함을 검출하기 위한 초음파 시험은 자동화된 C-Scan 시스템을 이용하여 스틸 연소관과 내열 고무 계면의 극히 제한된 영역에서 적용되어 왔다. 기존의 초음파 시험은 대부분의 초음파가 음향 임피던스가 낮은 고무 재질에서 흡수되므로 고체 추진기관의 라이너와 추진제 사이의 미접착 결함을 검출할 수 없었고, 이런 문제점을 해결하기 위하여 초음파 공진법을 사용하여 주파수 스펙트럼으로부터 공진 주파수를 분석하였다. 본 논문은 초음파 공진 특성을 이용하여 라이너와 추진제 사이의 미접착 결함을 검출할 수 있는 기법에 대해 자세히 기술하였다.