• Bulletin of the Korean Chemical Society
• /
• v.32 no.11
• /
• pp.4041-4048
• /
• 2011

High molecular weight tetrasulfonated poly(arylene biphenylsulfone ether) (TsPBPSEH) copolymers containing up to four pendant sulfonate groups per repeat unit were synthesized via aromatic nucleophilic displacement condensation from 4,4'-bis(4-chloro-3-sulfonatophenylsulfonyl)biphenyl-2,2'-disulfonate (SBCSBPD), 4,4'-dichlorodiphenylsulfone (DCDPS) and 4,4'-(hexafluoroisopropylidene)diphenol (6F-BPA). The synthesized copolymers were structurally characterized using $^1H$ NMR and FT-IR techniques. They were analytically pure, amorphous and were readily soluble in a wide range of organic solvents. Electrolyte membranes were successfully cast using the synthesized polymers with various sulfonation levels and N-methyl-2-pyrrolidinone. This new class of polymer membranes exhibited elevated thermal and physical stabilities and reduced swelling at high temperatures. An increase of acidic functional groups in the copolymer yielded high ion exchange capacity and moderate ionic conductivity values even at higher temperatures, which makes them potential ion conducting candidates.

• Bulletin of the Korean Chemical Society
• /
• v.33 no.8
• /
• pp.2529-2534
• /
• 2012

Poly(3,4-ethylenedioxythiophene) coated Manganese Dioxide (PEDOT/$MnO_2$) composite electrode was fabricated by simply immersing the $MnO_2$ electrode in an acidic aqueous solution containing 3,4-ethylenedioxythiophene (EDOT) monomers. Analysis of open-circuit potential of the $MnO_2$ electrode in the solution indicates the reduction of outer surface of $MnO_2$ to dissolved $Mn^{2+}$ ions and simultaneously oxidation of EDOT monomer to PEDOT on the $MnO_2$ surface to form a PEDOT shell via a galvanic displacement reaction. Analysis of cyclic voltammograms and specific capacitance of the PEDOT/$MnO_2$, conductive carbon added $MnO_2$ and conductive carbon added PEDOT/$MnO_2$ electrodes suggests that the conductive carbon acted mainly to provide a continuous conducting path in the electrode to improve the rate capability and the PEDOT layer on $MnO_2$ acts to increase the active reaction site of $MnO_2$.

• Applied Chemistry for Engineering
• /
• v.28 no.2
• /
• pp.165-170
• /
• 2017

An efficient synthetic process for bio-based adipic acid, a monomer for nylon 66, was developed from galactose. Galactaric acid, prepared from a mild oxidation of galactose using a Pt catalyst, was successfully converted to muconate, a key intermediate for adipic acid, by an efficient microwave-assisted DODH (deoxydehydration) reaction. The high efficiency of the microwave-assisted reaction greatly reduced the overall reaction time to 30 min. and resulted in an excellent yield of 97% of muconate. The catalytic hydrogenation of muconate followed by the acidic hydrolysis successfully produced the desired adipic acid in high purity after recrystallization.

• Food Science of Animal Resources
• /
• v.27 no.1
• /
• pp.110-116
• /
• 2007

Lactobacillus salivarius subsp. salivarius Nam27 with a high ${\beta}$-galactosidase activity was selected for enzymatic characterization. For purification, cell pellet was disrupted by Bead Beater, by DEAE-Sepharose and Mono-Q chromatography. The specific activity of the purified enzyme was 5,312 units/mg. The molecular weight of native monomeric ${\beta}$-galactosidase was estimated to be 30,000 dalton (monomer) by the SDS-PAGE. The optimum temperature and optimum pH were $50^{\circ}C$ and 5.0, respectively. This enzyme was stable between 35 and $55^{\circ}C$. ${\beta}$-galactosidase activity was lost rapidly above pH 7.0. But ${\beta}$-galactosidase was more stable at pH 4.0 (acidic conditions). And ${\beta}$-galactosidase activity was lost rapidly above $65^{\circ}C$ after 10 min incubation. $Ca^{2+}$ and $Zn^{2+}$ metal ions enhanced ${\beta}$-galactosidase activity by 164.09% and 127.37% while $Cu^{2+}$, $Fe^{3+}$ and $Mn^{2+}$ lowered ${\beta}$-galactosidase activity by 58.29%,85.10% and 77.66% respectively. Other metal ions didn't affect ${\beta}$-galactosidase activity significantly.

• Journal of the Korean Magnetic Resonance Society
• /
• v.9 no.2
• /
• pp.74-92
• /
• 2005

The high resolution solution structure of MCP-3 was determined using multinuclear, multidimensional NMR spectroscopy with an expressed and $^{13}C-\;and\;^{15}N-labeled$ protein. The MCP-3 has a typical chemokine fold including 3 anti-parallel $\beta-sheets$, and a C-terminal helix, but it exists as a monomer in solution under the conditions where the structure was determined (2 mM, pH 5.1 at $30^{\circ}C$). Based on the structure and the amino acid sequence compared to other chemokines we propose that Ile20 and Leu25 in MCP-3 play key roles in the formation of N-loop (residues between the $2^{nd}$ cysteine and the I sheet) which has been implicated as a determinant of chemokine specificity. Additional receptor binding surface is supplied by the 40s loop (residues between the 2 and the 3 sheet) and the binding interface of the acidic N-terminal region of chemokine receptor to MCP-3 would resemble the dimerization interface of CC type dimer.

• Microbiology and Biotechnology Letters
• /
• v.17 no.6
• /
• pp.580-586
• /
• 1989

Penicillium sp. CB-20 was selected for strong polygalacturonase activity among various strains of molds found in soil. The optimum pH for the enzyme activity was 5.0 and optimum temperature was 4$0^{\circ}C$. The enzyme was relatively stable in acidic condition and unstable by heat treatment. The activation energy, Km and V$_{max}$ for the polygalacturonase were 2.499 Kcal/mol, 2.13$\times$10$^{-2}$mol/l, and 104.17 $\mu$mol/min. The activity of polygalacturonase was inhibited by Ag$^{+}$, Cu$^{++}$, Pb$^{++}$, Fe$^{+++}$, $Ca^{++}$, Na$^+$, Mn$^{++}$. The enzyme can be inactivated by the treatment ethylenediamintetra acetic acid, 2,4-dinitrophenol and $H_2O$$_2$. The results indicate the possible involvement of histidine, chelate and terminal amino group as active site. The enzyme was endo-type polygalacturonase.

• Journal of the Korean Society of Food Science and Nutrition
• /
• v.21 no.2
• /
• pp.195-200
• /
• 1992

Rhizopus oryzae CJ-2114 was selected for its strong polygalacturonase activity among various strains of mold found in soil. The optimum pH for the enzyme activity was 4.0 and optimum temperature was 4$0^{\circ}C$. The activation energy for the polygalacturonase was calculated by Arrhenius equation was 2.048㎉/㏖. The reaction of this enzyme followed typical Michaelis-Menten kinetics with the Km value of 54.05mM with the $V_{max}$ of 13.9m mole/min. The enzyme is relatively stable in acidic condition. The activity of polygalactur-onase was inhibited completely by C $u^{2+}$, P $b^{2+}$ and Z $n^{2+}$, $_Mn^{2+}$ at concentration of 1 mM. The enzyme can be inactivated by the treatment with maleic anhydride and iodine. The results indicate the possible involvement of histidine at active site. When polygalacturonase from Rhizopus oryzae CJ-2114 was reacted with poly-galacturonic acid as a substrate mono-, di-, and oligogalacturonic acid were produced at early and mono-, digalacturonic acid produced at late incubation time. time.

• BMB Reports
• /
• v.33 no.4
• /
• pp.326-331
• /
• 2000

Acidic chitinases from the gizzards of a broiler were purified to homogeneity, using precipitation with $(NH_{4})_{2}SO_{4}$, ion exchanger chromatography, gel filtration, chromatofocusing and hydrophobic interaction chromatography. The enzymes, GAC1 and GAC2, were purified 180- and 194- folds with a recovery of 4.9% and 2.7%, respectively. The molecular mass of GAC1 and GAC2 were 48.2 kDa and 57.8 kDa, respectively. Chromatofocusing resulted in a pI of 3.1 for both enzymes. The purified enzymes were endochitinases that were devoid of ${\beta}-N-acetylglucosaminidase$ and lysozyme activity. Kinetic studies using $[^3H]chitin$ indicate that GAC1 has a $K_m$ and $V_{max}$ of 1.97 mg/ml and 185 mg/mg protein/h, respectively. The GAC2 has a $K_m$ and $V_{max}$ of 0.42 mg/ml and 92.3 mg/mg protein/h, respectively at optimal pH and temperature (pH 5.0 and $60^{\circ}C$). When the pentamer and hexamer of N-acetylglucosamine (GlcNAc) were used as a substrate, the major product by GAC1 was the dimer of GlcNAc with a differential accumulation of the monomer and trimer, depending upon the substrate. However, the GAC2 produced the dimer and trimer in an equal quantity, regardless of the substrate used. The first 9 $NH_2-terminal$ amino acid residues of the purified gizzard chitinase GAC1 and GAC2 shared a 100% homology. The first 25 $NH_2-terminal$ amino acid residues of GAC1 also shared 55-60% homology with animal chitinases and some animal proteins, such as whey protein and oviduct-specific proteins. However, little homology was found with either microbial and plant chitinases, or egg white lysozyme.

• Journal of Korean Dental Science
• /
• v.2 no.2
• /
• pp.5-11
• /
• 2009

Objectives : This study investigated the hypothesis that the dentin bond strength of self-etching adhesives (SEAs) may be improved by applying a coat of hydrophobic, neutral adhesive resin in addition to SEA. Method and Materials : The bond strengths of two SEAs - Experimental SEA (EX) and Adper Prompt (AP) - were measured with three bonding protocols. The D/E resin of All-Bond 2 was applied as the hydrophobic, neutral adhesive. Clearfil SE Bond (SE, self-etching primer system) and All-Bond 2 (AB, total etching system) were used as references. The following protocols were used: (1) EX1 (EX 1 coat); (2) EX2 (EX 2 coats); (3) EX+ (EX 1 coat + D/E resin); (4) AP1 (AP 1 coat); (5) AP2 (AP 2 coats); (6) AP+ (AP 1 coat + D/E resin); (7) SE (SE primer + SE bond); (8) SE+ (SE primer + D/E resin); (9) AB (etching + AB primer + D/E resin). Filtek Z250 composite resin was built up and the microtensile bond strength (MTBS) values of the specimens were compared. The fractured surfaces were observed using SEM. Results : When SEA was used as self-etching primer and hydrophobic, neutral adhesive was applied as well, MTBS was significantly higher than that when either one coat or two coats of SEA only were used (p < 0.05). Conclusion : The hydrophobic, neutral adhesive improved the integrity of the bonded interface obtained with SEA.

• Membrane Journal
• /
• v.23 no.4
• /
• pp.290-296
• /
• 2013

Poly(vinylidenefluoride-co-chlorotrifluoroethylene) P(VDF-co-CTFE) polymer was attached to methacrylic acid (MAA) in the presence of 1,8-diazabicyclo[5,4,0]undec-7-ene(DBU) catalyst to prepare P(VDF-co-CTFE)-MAA copolymer. The modified P(VDF-co-CTFE)-MAA was polymerized with 2-sulfoethyl methacrylate (SEMA) monomer in the presence of 4',4'-azobis(4-cyanovaleric acid(ACVA) initiator by free radical polymerization to form the proton conducting membrane. The ratio of the SEMA was increased in the membrane to increase the presence of the acidic group. The maximum IEC value that was observed at 50% SEMA was around 0.82 meq/g, which is consistent with the water uptake value. The highest proton conductivity achieved by P(VDF-co-CTFE)-MAA/SEMA membrane with 50% SEMA was approximately 0.041 S/cm. This indicates that the available ionic group for the proton conduction increases with the increase in the SEMA in the membrane.