• Proceedings of the Korean Society of Plant Pathology Conference
• /
• 2003.10a
• /
• pp.100.1-100
• /
• 2003

A dctA gene encoding a protein with identity to a C4-dicarboxylate/H+ was cloned from a beneficial biocontrol bacterium, P. chororaphis O6. Expression of the dctA was induced in minimal medium by several organic acids and was repressed by glucose. Highest expression was observed in early-log cells grown on fumarate and succinate with decline as cells approached late-log phase. The dctA transcript accumulated weakly when cells were grown on malate but strong expression was observed with benzoate. Expression of the dctA transcript was repressed in early-log cells upon addition of glucose to fumarate, but was detected as the cell culture aged. A dctA-deficient mutant of O6, constructed by marker exchange mutagenesis, did not grow on minimal medium containing succinate, benzoate, or fumarate, and growth on malate was delayed. The dctA mutant and wild type grew equally on glucose. The dctA mutant on cucumber roots in sterilized potting soil was colonized at levels comparable to those of the wild type, but induction level of disease resistance by the mutant against target leaf spot disease was decreased. These results may indicate that the dctA is essential for utilization of certain organic acids and its expression is controlled by the availability of sugars. In addition, the dctA is not essenitial for cucumber root colonization, but important for induction of disease resistance.

• Proceedings of the Korean Society of Plant Pathology Conference
• /
• 2003.10a
• /
• pp.77.2-78
• /
• 2003

An EREBP/AP2-type transcription factor (CaPFl) was isolated by DDRT-PCR following inoculation of soybean pustule pathogen Xanthomonas axonopodis pv. glycines Bra which induces HR on pepper leaves. Genomic Southern blot analysis revealed that the CaPFl gene is present as a single copy within the hot pepper genome. The deduced amino acid sequence of CaPFl has two potential nuclear localization signals, a possible acidic activation domain, and an EREBP/AP2 motif that could bind to a conserved cis- element present in promoter region of many stress-induced genes. The mRNA level of CaPFl was induced by both biotic and abiotic stresses. We observed higher-level transcripts in resistance-induced pepper tissues than diseased tissues. Expression of CaPFl is also induced upon various abiotic stresses including ethephon, MeJA, cold stress, drought stress and salt stress treatments. To study the role of CPFI in plant, transgenic Arabidopsis and tobacco plants which express higher level of pepper CaPFl were generated. Global gene expression analysis of transgenic Arabidopsis by cDNA microarray indicated that expression of CaPFl in transgenic plants affect the expression of quite a few GCC box and DRE/CRT box-containing genes. Furthermore, the transgenic Arabidopsis and tobacco plant, expressing CaPFl showed tolerance against freezing temperature and enhanced resistance to Pseudomonas syrnigae pv. tabaci. Taken together, these results indicated that CaPFl is a novel EREBP/AP2 transcription factor in hot pepper plant and it may has a significant role(s) in regulation of biotic and abiotic stresses in plant.

• Journal of Microbiology and Biotechnology
• /
• v.12 no.4
• /
• pp.576-582
• /
• 2002

Probiotics are live microbial feed supplements which beneficially affect the host animal by improving its intestinal microflora. To select the best Lactobacillus spp. as a chicken probiotic, probiotic characteristics of 10 selected Lactobacillus strains isolated from chicken cecum or obtained from KCTC were investigated. The strains were examined for resistance to pH 2.0 and 0.3% oxgall, and adhesion to cecal mucus and cecal epithelial cells. All strains grew in MRS containing 0.3% oxgall. However, Lb. plantarum AYM-10, Lb. fermentum YL-3, AYM-3, and Lb. paracasei YL-6 showed relatively high resistance to 0.3% oxgall. Lb. fermentum YL-3, YM-5, AYM-3, and Lb. paracasei YL-6 survived 4 hours of incubation at pH 2.0. Lb. fermentum YL-3, KCTC 3112, and Lb. plantarum AYL-5 were strongly adhesive to cecal mucus, while the rest showed moderate or low adhesion. Lb. plantarum AYM-10, AYL-1, and AYL-5 had good adhering properties to cecal epithelial cells (30.7$\pm$10.82, 40.2$\pm$20.90, and 14.5$\pm$4.22, respectively). Lb. fermentum YL-3, AYM-3, and KCTC 3547 showed Intermediate adhesion ability, and Lb. plantarum showed better adhesion ability to cecal epithelial cells than Lb. fermentum. Attached Lb. fermentum YL-3 to cecum after 60 min incubation was confirmed using CLSM. Lb. fermentum YL-3 attached to a matrix which was composed of a mucus layer adjacent to intracrypts and pericryptal region. Some Lb. fermentum YL-3 bound to mucosal epithelial cells. From these results, Lb. fermentum YL-3 was selected as a chicken probiotic. In vivo trials of chicks inoculated with Lb. fermentum YL-3 had decreased Salmonella population in cecal contents and livers (p<0.5).

• Biomedical Science Letters
• /
• v.11 no.4
• /
• pp.525-531
• /
• 2005

Staphylococcus aureus is a major cause of nosocomial infections and is one of the most commonly isolated bacterial species in the hospital and continues to be an important pathogen in both community and hospital-acquired infection. Methicillin resistant S. aureus (MRSA), which is associated with hospitals is now being isolated in the community. The purpose of this study is to investigate the carrier rate of S. aureus in the community, antibiotic resistance patterns of the organism, detection of MRSA and mecA gene in MRSA. Ninety strains $(46.4\%)$ of S. aureus were isolated from the nasal specimens of 194 elementary school students. Eighty-nine strains $(98.9\%)$ of 90 S. aureus were resistant to penicilin, 36 strains $(40.0\%)$ to erythromycin, 14 strains $(15.6\%)$ to fusidic acid, 11 strains $(12.2\%)$ to gentamycin, 9 strains $(10.0\%)$ to tobramycin, 5 strains $(5.6\%)$ to oxacillin, 4 strains $(4.4\%)$ to clindamycin, 2 strains $(2.2\%)$ to tetracycline, 1 strains $(1.1\%)$ to fosfomycin. None of $90(0\%)$ S. aureus isolates was resistant to ciprpfloxacin, trimethoprim/sulfamethoxazole, levofloxacin, linezolid, moxifloxacin, nitrofurantoin, norfloxacin, rifampicin, quinupristin/dalfopristin, teicoplanin, and vancomycin. Five strains $(5.6\%)$ of 90 S. aureus isolates were MRSA. The mecA gene was detected from five MRSA strains by PCR.

• Journal of Veterinary Clinics
• /
• v.21 no.2
• /
• pp.133-139
• /
• 2004

Bacterial pathogens were isolated from 36 dogs with respiratory signs, that were submitted to Veterinary Clinics in Jeju, including Veterinary Medical Teaching Hospital in Cheju National University. Of 36 isolates, 16 (44.4%) bacterial pathogens were Gram-positive and 20 (55.6%) were Gram-negative. Gram-positive bacteria identified with API Staph were 12 S. intermedius (33.3%), 2 S. aureus (5.6%), 1 S. haemolyticum (2.8%), and 1 S. xylosus (2.8%). Gram-negative organisms identified with API 20E or API NE included 8 Bordetella bronchiseptica (22.2%), 6 Escherichia coli (16.7%), 4 Pasteurella spp. (11.1%), 1 Enterobacter intermedius (2.8%), and 1 Oligella ureolytica (2.8%). Both Staphylococcus spp. isolates and Gram-negative pathogens were resistant to one or more antibiotics, including ampicillin (AM), amoxicillin/clavulanic acid (AMC), chloramphenicol (C), cefazolin (CZ), erythromycin (E), gentamicin (GM), kanamycin (K), lincomycin (L), oxacillin (OX), trimethoprim/sulfamethoxazole (SXT), and tetracycline (TE). All Staphylococcus spp. were susceptible to AMC, OX and VA, while many isolates were highly resistant to L (87.5%), E (68.8%), P (62.5%), and AM (56.3%). Antibiotic-resistant patterns of staphylococcal isolates were shown ranges from single to 9-resistant patterns. Resistant rates to antibiotics of Gram-negative bacteria were usually higher than those of Staphylococcus spp. in this study. Most Gram-negative bacteria were highly resistant to L (90.0%), AM (85.0%), E (85.0%), P (85.0%), OX (80.0%), and CZ (75.0%). B. bronchiseptica isolates showed 5 to 8 antibiotics-resistant patterns and Pasteurella spp., 2 to 8-resistant patterns. In particular, all 6 E. coli isolates were resistant to more than 9 different kinds of antibiotics, including one strain resistant to all antibiotics tested.

• The Plant Pathology Journal
• /
• v.26 no.1
• /
• pp.49-56
• /
• 2010

Thirty-six isolates of Colletotrichum spp. were obtained from infected grapes in two different locations of Korea; 18 isolates from Cheonahn, where carbendazim (MBC) and the mixture of MBC and diethofencarb (NPC) had been applied to control grape ripe rot, and 18 isolates from Cheongju, where no fungicides had been used. Sequences analysis of the internal transcribed spacer (ITS) and the $\beta$-tubulin gene identified 34 of the 36 isolates as Colletotrichum gloeosporioides. The remaining two isolates from Cheongju were identified as C. acutatum. Of the 18 isolates from Cheonahn, 12 were resistant to both MBC and the mixture (MBC+NPC), and six were sensitive to them. All C. gloeosporioides isolates from Cheongju, but not the two C. acutatum isolates, were sensitive to these fungicides. Sequence analysis of the $\beta$-tubulin gene in all isolates revealed that C. gloeosporioides resistant to MBC and MBC+NPC had a tyrosine instead of phenylalanine at the amino acid position 200. The appearance of resistance to MBC and the mixture in C. gloeosporioides correlated with the history of fungicide application in Korea.

• 한국신재생에너지학회:학술대회논문집
• /
• 2007.06a
• /
• pp.250-253
• /
• 2007

An evaporated Ti/Pd/Ag contact system is most widely used to make high-efficiency silicon solar cells, however, the system is not cost effective due to expensive materials and vacuum techniques. Commercial solar cells with screen-printed contacts formed by using Ag paste suffer from a low fill factor and a high shading loss because of high contact resistance and low aspect ratio. Low-cost Ni and Cu metal contacts have been formed by using electroless plating and electroplating techniques to replace the Ti/Pd/Ag and screen-printed Ag contacts. Ni/Cu alloy is plated on a silicon substrate by electro-deposition of the alloy from an acetate electrolyte solution, and nickel-silicide formation at the interface between the silicon and the nickel enhances stability and reduces the contact resistance. It was, therefore, found that nickel-silicide was suitable for high-efficiency solar cell applications. The Ni contact was formed on the front grid pattern by electroless plating followed by anneal ing at $380{\sim}400^{\circ}C$ for $15{\sim}30$ min at $N_{2}$ gas to allow formation of a nickel-silicide in a tube furnace or a rapid thermal processing(RTP) chamber because nickel is transformed to NiSi at $380{\sim}400^{\circ}C$. The Ni plating solution is composed of a mixture of $NiCl_{2}$ as a main nickel source. Cu was electroplated on the Ni layer by using a light induced plating method. The Cu electroplating solution was made up of a commercially available acid sulfate bath and additives to reduce the stress of the copper layer. The Ni/Cu contact was found to be well suited for high-efficiency solar cells and was successfully formed by using electroless plating and electroplating, which are more cost effective than vacuum evaporation. In this paper, we investigated low-cost Ni/Cu contact formation by electroless and electroplating for crystalline silicon solar cells.

• International Journal of Industrial Entomology and Biomaterials
• /
• v.11 no.1
• /
• pp.37-42
• /
• 2005

We cloned the $\beta$-tubulin genes from the wild type strain and two benomyl-resistant mutants of Metahizium anisopliae and determined their nucleotide sequences. A $\beta$-tubulin encoding 448-residue protein from wild type M. anisopliae shows strong homology to other $\beta$-tubulins. The coding region is interrupted by four introns. Comparisons of intron position between the M. anisopliae gene and other fungal $\beta$-tubulin genes show considerable positional conservation. The mutations responsible for benomyl resistance were determined in two spontaneous mutants, 8-18 and 8­19. One mutant 8-18 substituted glutamate for aspar­agine at position 33 and lysine for glutamine at position 134. The other mutant 8-19 showed alterations at three positions of $\beta$-tubulin arginine for tryptophan at position 21, lysine for asparagine at position 33, and phenylalanine for leucine at position 240. These data suggest that regions of $\beta$-tubulin containing amino acids 21, 33,134, and 240 interact to form the binding site of benomyl.

• The Plant Pathology Journal
• /
• v.24 no.2
• /
• pp.183-190
• /
• 2008

Plant-cell-wall-degrading enzymes (PCWDEs) of Pectobacterium carotovorum subsp. carotovorum are the key virulence factor in pathogenesis of soft rot disease of vegetables. The production of PCWDEs is controlled in a cell density dependent manner to avoid the premature production of PCWDEs and subsequent activation of plant defense. N-oxoacyl-homoserine lactone (OHL) is essential for quorum sensing in the soft rot pathogen and the expI gene is responsible for OHL production. The ExpI homolog isolated from P. carotovorum subsp. carotovorum SL940 had 94% identity with ExpI of E. carotovora subsp. carotovora scc3193 and 74% identity with Carl of E. carotovora subsp. atroseptica. The transgenic plants that express exp I uner the control of CaMV35S promoter were able to produce diffusible OHL. Transgenic plants producing OHL were very resistant to the infection of P. carotovorum subsp. carotovorum. Since the PR1 gene was strongly induced and NPR1 and NPR4 were induced weakly in transgenic plants compared to the wild type, salicylic acid-dependent pathways is likely involved in the resistance to the soft rot pathogen P. carotovorum subsp. carotovorum in ExpI transgenic plants.

• Applied Chemistry for Engineering
• /
• v.16 no.3
• /
• pp.317-322
• /
• 2005

Nowadays, recycling of aggregates from the waste concrete is in big demand due to the protection of environment and the shortage of aggregates that are needed for ever expanding construction projects. This study was undertaken to examine the feasibility of recycling waste concrete powder produced in the crushing process of demolished concrete as a filler material for polymer mortar. In this study, polymer mortar specimens were prepared by varying the mix proportion of polymer binder (ranging 9~15 wt%), waste concrete powder (ranging 0~20 wt%) substituted for silica powder, 0.1~0.3 mm fine aggregate (ranging 21~24 wt%) and 0.7~1.2 mm fine aggregate (ranging 44~47 wt%). For the prepared polymer mortar specimens, various physical properties such as strength, water absorption, heat water resistance, acid resistance, pore distribution and SEM observation were investigated in this work. As a result, physical properties of polymer mortar were observed to have remarkably improved with an increase of polymer binder, but greatly deteriorated with an increase of substitution quantity of waste concrete powder.