• Transactions on Electrical and Electronic Materials
• /
• v.9 no.4
• /
• pp.163-168
• /
• 2008

Photonic crystal structures have been received considerable attention due to their high optical sensitivity. One of the techniques to construct their structure is the dip-pen lithography (DPN) process, which requires a nano-scale resolution and high reliability. In this paper, we propose a two dimensional photonic crystal array to improve the sensitivity of optical biosensor and DPN process to realize it. As a result of DPN patterning test, we have observed that the diffusion coefficient of the mercaptohexadecanoic acid (MHA) molecule ink in octanol is much larger than that in acetonitrile. In addition, we have designed and fabricated optical waveguides based on the mach-zehnder interferometer (MZI) for application to biosensors. The waveguides were optimized at a wavelength of 1550 nm and fabricated according to the design rule of 0.45 delta%, which is the difference of refractive index between the core and clad. The MZI optical waveguides were measured of the optical characteristics for the application of biosensor.

• Biomedical Science Letters
• /
• v.6 no.1
• /
• pp.55-63
• /
• 2000

This study has been carried out to investigate the sensitivity of polymerase chain reaction (PCR) method over conventional acid-fast bacilli (AFB) staining and/culture methods for the detection of Mycobacterium tuberculosis from trace body fluid and paraffin-embedded tissues (PET) specimens. A total of 65 cases were employed for the AFB staining and culture test, and a total of 50 cases were subjected to PCR and histopathological analysis. Among the specimen showing negative reaction to AFB staining, 12.1% were positive to PCR and 3.7% of the specimen representing negative result to culture test showed positive reaction to PCR. In addition, 20.0% of the specimen with AFB negative showed positive reaction to PCR. From these results, it could be concluded that PCR method overwhelms AFB staining and culture tests in sensitivity and specificity to M tuberculosis detection.

• Bulletin of the Korean Chemical Society
• /
• v.23 no.3
• /
• pp.385-390
• /
• 2002

Laccase could be successfully assembled on an amine-derivatized platinum electrode by glutaraldehyde coupling. The enzyme layer formed on the surface does not communicate electron directly with the electrode, but the enzymatic activity of the surf ace could be followed by electrochemical detection of enzymatically oxidized products. The well-known laccase substrates, ABTS (2,2'-azinobis(3-ethylbenzothiazoline-6-sulfonic acid)) and PPD (p-phenylenediamine) were used. ABTS can be detected down to 0.5 ${\mu}M$ with linear response up to 15 ${\mu}M$ and current sensitivity of 75 nA/ ${\mu}M.$ PPD showed better response with detection limit of 0.05 ${\mu}M$, linear response up to 20 ${\mu}M$, and current sensitivity of 340 nA/ ${\mu}M$ with the same electrode. The sensor responses fit well to the Michaelis-Menten equation and apparent $K_M$ values are 0.16 mM for ABTS and 0.055 mM for PPD, which show the enzymatic reaction is the rate-determining step. The laccase electrode we developed is very stable and more than 80% of initial activity was still maintained after 2 months of uses.

• Natural Product Sciences
• /
• v.21 no.3
• /
• pp.192-195
• /
• 2015

An antibacterial benzoquinone, 2,6-dimethoxy-1,4-benzoquinone, isolated from Ficus foveolata stems was used as a standard marker for establishment of quantitative HPLC analysis for the stem extracts of F. foveolata. The method utilized a TSK-gel ODS-80Ts column (5 μm, 4.6 × 250 mm) with the mixture of methanol and 5% acetic acid in water (24:76, v/v) as the mobile phase at a flow rate of 1 mL/min, and quantitative detection at 289 nm. The parameters i.e. linearity, intraday and interday precision, accuracy, specificity and sensitivity of the method were evaluated for method validation. The recoveries of the method were 99.5 - 103.6% and good linearity (R² ≥ 0.9999) was obtained. A high degree of specificity, sensitivity as well as repeatability and reproducibility (RSD less than 2 and 5%, respectively) were also achieved. Chloroform was served as the most suitable solvent for extraction of 2,6-dimethoxy-1,4-benzoquinone. The optimised sample preparation and HPLC method can be practically used in the routine quality control process of F. foveolata stem extracts.

• Korean Journal of Veterinary Research
• /
• v.20 no.2
• /
• pp.159-165
• /
• 1980

A total of 98 strains of Bordetella bronckiseptica isolated from pigs affected the infectious atrophic rhinitis(AR) during 1978 were surveyed for drug sensitivity to 26 chemotherapeutic agents, and minimum inhibitory concentration(MIC), incidence rate of resistant strain and resistant patern from the strains which were obtained from the different pig farm in Jeonnam province were examined. The results obtained are summarized as follows. 1. Most of the strains tested were resistant to Ampicillin (AB, PC), spiramycin(SPO, sulfa drugs (SD) (MIC:$400.0{{\mu}g/ml}$) and streptomycin(SM) (MIC:$200.0{{\mu}g/ml}$). Of the 75.0% of strains were also resistant to penicillin(PC) (MIC:$200.0{{\mu}g/ml}$) and of the 14.3 of strains were inhibited to grow to tetracycline(TC), chlortetracycline(CTC), oxytetracyc-line(OTC), erythromycin(EM), tylosin(TS), leucomycin (LM) and chloramphenicol (CP) (MIC:$6.25{{\mu}g/ml}$). On the other hand, most of the strains tested were inhibited to grow to kanamycin(KM), gentamycin(GM) neomycin(NM) (MIC:$25.0{{\mu}g/ml}$) and to colistin(CL) (MIC:$12.5{{\mu}g/ml}$). 2. Incidence rate of resistant strains to main chemotherapeutic agents was 100.0% of sulfa drugs, 96.4% of streptomycin, 85.7% of penicillin, tetracycline, chloramphenicol and erythromycin, 46.4% of gentamycin, 17.9% of colistin and 0.0% of kanamycin and nalidixic acid.

• Journal of Sensor Science and Technology
• /
• v.21 no.5
• /
• pp.345-351
• /
• 2012

Biomimetic terpene sensors which have high sensitivity and stability have been fabricated using moleculary imprinted polymer (MIP) technology. Since it is impossible to make a resistive type sensor due to the high resistance of MIP, we improved the sensor by adding conductive polymers. We investigated the sensitivity of resistive type sensors with nano particles depending on the amount of conductive polymers. The MIP membrane contained the methacrylic acid as functional monomer and ethylene glycol dimethacrylate as cross linker, which formed specific cavities originated by the target terpene molecules. The mixture of MIP and the conductive polymer was coated on the patterns of interdigit electrodes on the alumina substrate. The fabricated sensors showed their highest specific sensitivities exposed to 500 ppm target gases : limonene 0.055 at 40% of amount of conductive polymers and geraniol $5.84{\times}10^{-4}$ at 20% of amount of conductive polymers. In conclusion, we found that the terpene sensors are affected by the target molecules, functional monomers and the conductive polymers.

• The Journal of the Korean Society for Microbiology
• /
• v.22 no.4
• /
• pp.413-425
• /
• 1987

In the present experiments, isolated Vibrio species from marine and clinical specimens from July, 1985 to October, 1986, had the results as follows: 1. The 55 strains of Vibrio were isolated and identified; Vibrio parahaemolyticus was 35 strains, Vibrio vulnificus was 10 strains, Vibrio alginolyticus was 10 strains. 2. In the K-serotyping of Vibrio parahaemolyticus, fourteen serotypes identified but three were not strains typable by the availble K-antisera. 3. In the Kanagawa phenomenon experiment of Vibrio parahaemolyticus, it proved positive reaction, 14 of 15 strains(93%) isolated from the patient and 13 of 20 strains(65%) isolated from the nature. 4. In twelve antibiotic resistance experiments, Vibrio parahaemolyticus and Vibrio alginolyticus showed 100% resistance on ampicilline, but Vibrio vulnificus showed 100% sensitivity. But all of them proved 100% sensitivity on chloramphenicol, tetracycline, nalidixic acid. 5. In the antibiotic resistance patterns, Vibrio parahaemolyticus proved that 15 strains(43%) resisted on 4 antibiotics and 5 strains(14%) resisted on 7 antibiotisc and. Vibrio vulnificus proved that 1 strain(10%) resisted on 2 antibiotics and 6 strains(60%) without resistance, Vibrio alginolyticus proved that 7 strains(70%) resisted on 3 antibiotics and 2 strains(20%) resisted on 8 antibiotics.

• Bulletin of the Korean Chemical Society
• /
• v.31 no.11
• /
• pp.3123-3127
• /
• 2010

A highly sensitive electrochemical detection method for dopamine (DA) has been developed by relying on a multiwalled carbon nanotube (CNT)-sol-gel titania-Nafion composite film modified glassy carbon (GC) electrode. The CNT-titania-Nafion/GC electrode exhibited excellent electrocatalytic activity towards DA. Therefore, the CNT-titania-Nafion/GC electrode showed improved voltammetric and amperometric responses for DA compared to those obtained with both titania-Nafion/GC and Nafion/GC electrodes. The CNT-titania-Nafion/GC electrode gave a linear response ($R^2$ = 0.999) for DA from $0.5\;{\mu}M$ to 0.5 mM with a detection limit (S/N = 3) of $0.1\;{\mu}M$ and a good sensitivity of 150 mA/M while other electrodes such as CNT-Nafion/GC, titania-Nafion/GC, and a bare GC gave a sensitivity of 89, 39, and 36 mA/M, respectively. Besides, the CNT-titania-Nafion/GC electrode displayed very fast response time within 2 s. The modified electrode showed good selectivity against ascorbic acid. The modified electrode showed good stability and reproducibility. The CNT-titania-Nafion/GC electrode was applied to the determination of DA in urine and serum samples.

• Korean Journal of Fisheries and Aquatic Sciences
• /
• v.49 no.6
• /
• pp.838-844
• /
• 2016

In this study, epidemiological cut-off values were estimated for 44 Photobacterium damselae isolates, since clinical breakpoints have not been established for this pathogenic bacterium. The susceptibility of the isolates to 10 antibiotics was evaluated using internationally standardized disc diffusion protocols. Normalized resistance interpretation was used to generate statistically valid epidemiological cut-off values for the susceptibility data. There were not enough strains exhibiting full sensitivity to ampicillin and amoxicillin to allow analysis of these antibiotics. Because there were only a marginally sufficient number of strains exhibiting full sensitivity to oxytetracycline, the cut-off value generated provided only a provisional estimate. The valid wild-type cut-off values were <13, 13, 9, 22, 25, 27, and 28 mm for gentamicin, cephalexin, erythromycin, oxolinic acid, flumequine, florfenicol, and sulfamethoxazole/trimethoprim, respectively. The application of these cut-off values should greatly facilitate the rational selection of antibiotics for use in commercial fish farms.

• Macromolecular Research
• /
• v.9 no.6
• /
• pp.327-331
• /
• 2001

A new soluble photosensitive poly(amide-co-imide) containing p-phenylenediacryloyl moiety was synthesized and its photoreactivity was characterized. The copolymer was synthesized fromp-phenylenediacryloyl chloride, 4,4-(hexafluoroisopropylidene)diphthalic anhydride and two equivalents of bis(4-aminophenyl) ether in NMP with a subsequent chemical imidization of the resulting poly[amide$\xi$ο-(amic acid)] by acetic anhydride and pyridine. The structure and thermal properties of the polymer were characterized by spectroscopic methods and thermal analyses. The polymer was stable up to 350$\^{C}$, showed good solubility in polar aprotic solvents, and became insoluble after UV irradiation due to the[2+2] cycloaddition of phenylenediacryloyl moiety. Photoreactivity of the polymer was investigated in solution or as a film with respect to the various exposure conditions by UV/Vis spectroscopy. The photosensitivity was noticeably increased with the irradiation temperature, especially in the presense of photosensitizer. The reason for the increased sensitivity was speculated based on the flexibilization of main chain at elevated temperature. Exposure characteristic curves were obtained from the gel fraction experiments after UV irradiation. The sensitivity and contrast at 160$\^{C}$ were measured to be 293 mJ/㎠ and 1.64, respectively.