• Toxicological Research
• /
• 제12권2호
• /
• pp.243-250
• /
• 1996

To evaluate an effect of ethanol pretreatment on the toluene metabolism, toluene (50% in olive oil) was given three times at 0.2 ml/100g body weight at the interval of one day to the rats fed with 5% ethanol during two months. The ethanol pretreated rats were not identified particular liver injury by the histopathologic findings. In case of toluene treatment, the ethanol pretreatment to the rats led to more increased concentration of urinary hippuric acid than those treated with only toluene. The ethanol pretreatment to the rats led to the increased activities of hepatic aniline hydroxylase and these enzyme activities were higher both in toluene treated and those pretreated with ethanol, but no differences were found in two groups. Ethanol pretreated rats showed the more increased activities of benzylalcohol dehydrogenase than control group. Moreover, the ethanol pretreatment to the toluene treated rats led to significantly more increased activities of benzylalcohol dehydrogenase compared with those treated with toluene only. Furthermore, the alcohol pretreatment to the toluene treated rats also led to somewhat higher activities of benzaldehyde dehydrogenase than those treated with toluene. In conclusion, these results indicate that the chronic pretreatment of ethanol at not so much liver damage as normal may rather activate the toluene metabolism.

• 한국신재생에너지학회:학술대회논문집
• /
• 한국신재생에너지학회 2009년도 추계학술대회 논문집
• /
• pp.511-511
• /
• 2009

Lignocellulosic biomass is the most abundant organic material on earth and also promising raw material for bioenergy production. Agricultural residues in the process of bio-oil extraction, is an abundant and low-cost lignocellulosic material. The technology for conversion of lignocellulosic biomass resources to fuels and chemicals, such as ethanol, has been under development for decades. One of the well-studied technologies that are currently being commercialized is to use a dilute acid-catalyzed pretreatment followed by enzymatic hydrolysis and fermentation to produce ethanol. In this work, the dilute-acid hydrolysis of agricultural residues was optimized through the utilization of statistical experimental design. Evaluation criteria for optimization of the pretreatment conditions were based on high xylose recovery and low inhibitor contents in the hydrolyzates. The purpose of this study was to gain a more accurate understanding of the quantities of acid required for effective hydrolysis and the reactivity trade-offs with reaction time and temperature that will enable overall process optimization.

• Journal of Crop Science and Biotechnology
• /
• 제10권1호
• /
• pp.39-44
• /
• 2007

The effect of inabenfide was investigated in rice seedlings subjected to salt stress in relation to changes in chlorophyll fluorescence(${\Delta}F/Fm'$), lipid peroxidation, salicylic acid(SA) content, and catalase(CAT) activity. A reduction in shoot growth of rice seedlings by 120 mM NaCl treatment was significantly alleviated by pretreatment with 30 ${\mu}M$ inabenfide. Sodium ion content was not affected by pretreatment with inabenfide, suggesting that alleviation was not due to a reduction in sodium ion uptake by the rice seedlings. At three days after NaCl treatment, the rice seedlings pretreated with inabenfide showed a higher ${\Delta}F/Fm'$(30%) and lower lipid peroxidation(28%) compared with the rice seedlings treated with NaCl alone. After NaCl treatment, CAT activity in the third leaf of rice seedlings decreased significantly but alleviated by pretreatment with inabenfide. Furthermore, pretreatment with inabenfide also reduced the level of SA which accumulated drastically in the third leaf of rice seedlings within a day after exposure to salt stress. These results suggest that inabenfide prevents SA accumulation in rice seedlings under salt stress which eventually induces the alleviation of salt stress damage.

• Restorative Dentistry and Endodontics
• /
• 제18권2호
• /
• pp.423-430
• /
• 1993

The purpose of this study was to investigate the effect of ferric and ferric ions contained in phosphoric acid solution as a pretreatment solution on bonding of MMA/TBBO resin to dentin. Each of 1 % and 3 % ferric chloride. cupric chloride. cupric sulfate. and cupric nitrate was mixed into 10% phosphoric acid solution and pretreated dentin surface of bovine anterior teeth for 30 seconds followed- by water rinse and dry. Tensile bond strength was determined after bonding of pretreated dentin with MMA/TBBO resin by use of brush-on ;technique and storing for 24 hours in 3it distilled water. The amount of cupric ions adsorbed on pretreated dentin surface was detected by Wave-Dispersion X-ray microanalyzer for different groups of each pretreatment solution containing cupric salts. The pretreatment with cupric ions contained in 10% phosphoric acid solution was effective to increase bonding strength of MMA/TBBO resin to dentin but not in case of ferric ions. The pretreatment with 3 % cupric chloride and cupric nitrate both enhanced significant increase in bonding strength compared to the control group of 10% phosphoric acid solution(p<0.05). Cupric ions measured in pretreated dentin surface was higher in 3 % cupric chloride group than in 1% cupric chloride group, but couldn't find distinct relationship from the results of this experiment between the amount of adsorbed cupric ions according to the kind of cupric salts and the bonding strength value.

• Journal of Environmental Health Sciences
• /
• 제31권4호
• /
• pp.294-300
• /
• 2005

Food waste can be a valuable carbon source in biological nutrient removal (BNR) systems because of high C/N and C/P ratios. However, food waste should be pretreated to promote its hydrolysis rate because hydrolysis reaction would be a rate-limiting step. This study investigates the influence of the enzymatic pretreatment on acid fermentation of food waste. Solubilization of particulate matter in food waste by using commercial enzymes was examined. The acidification efficiency and the volatile fatty acids (VFAs) production potential of enzymatically pretreated food waste were also examined. The highest volatile suspended solids (VSS) reduction was obtained with an enzyme mixture ratio of 1:2:1 of carbohydrase:protease:lipase. An optimum enzyme dosage for solubilization of food waste was $0.1\%$(V/V) with the enzyme mixture ratio of 1:2:1. In the acid fermentation of enzymatically pretreated food waste, $0.1\%$(V/V) enzyme mixture dosage for pretreatment result in the maximum VFAs production and the best VFAs fraction in soluble COD(SCOD). The VFAs production at this addition level was 3.3 times higher than that of no-enzyme added fermenter. The dominant VFAs present was n-butyrate followed by acetate.

• Journal of Pharmaceutical Investigation
• /
• 제24권4호
• /
• pp.281-287
• /
• 1994

The effects of oleic acid, propylene glycol and 5% (w/w) oleic acid in propylene glycol on the electrical properties of hairless mouse skin were studied and the results were compared. The complex electrical impedance was measured as a function of frequency, and resistance and capacitance were determined from the Nyquist plot. Immediately after the treatment with oleic acid, resistance was 145% of the pretreatment value. However it decreased with time and, after 20 hours, it was about 25% of its pretreatment value. Capacitance increased; immediately after the treatment, it was about 125% of pretreatment value and it seemed to increase slowly with time. When the skin was treated with propylene glycol, resistance decreased about 5O% and capacitance increased about 65%. Similar results were observed when the skin was treated with 5% (w/w) oleic acid in propylene glycol, except that the magnitude of resistance drop was much larger. Oleic acid acted synergistically with propylene glycol. Together with the flux data in the literature, the results obtained in this work indicate that electrical resistance is closely related to the permeability of drug molecules through the skin. The results are discussed in terms of the mechanism of action of these penetration enhancers. Overall, this work provided further mechanistic insight into the role of SC lipids in skin resistance and capacitance.

• Journal of the Korean Wood Science and Technology
• /
• 제42권2호
• /
• pp.172-182
• /
• 2014

Extraction is a necessary element in the bioconversion of lignocellulosics to fuels and chemicals. Although various forms of chemical pretreatment of cellulosic materials have been proposed, their effectiveness varies depending on the treatment conditions and substrate. In this study, mixed hardwood (MH) and loblolly pine (LP) were pretreated with dilute acid in a 100 mL accelerated solvent extraction (ASE) at the predetermined optimal conditions: temperature: $170^{\circ}C$, acid concentration: 0.5% (w/v), and reaction time: 2~64 min. This method was highly effective for extracting the hemicellulose fraction. Total xmg (defined as the sum of xylose, mannose, and galactose) can be extracted from milled MH and LP through pressurized dilute acid treatment in maximum yields of 12.6 g/L and 15.3 g/L, respectively, representing 60.5% and 70.4% of the maximum possible yields, respectively. The crystallinity index increased upon pretreatment, reflecting the removal of the amorphous portion of biomass. The crystalline structure of the cellulose in the biomass, however, was not changed by the ASE extraction process.

• Journal of the Korean Applied Science and Technology
• /
• 제25권1호
• /
• pp.58-64
• /
• 2008

Pretreatment of eliminating FFA is needed to make biodiesel from animal fat recovered from leather wastes because its acid value is high. This study was carried out to investigate the influence of 4 different pretreatment methods, which are heterogeneous catalyst method, ion exchange resin method, low pressure.high temperature method, and alkali method on the eliminating FFA and fatty acid composition. The results showed that the rate of eliminating FFA increased in the order of alkali method > catalyst method > low pressure high temperature method > ion exchange method. In the case of pretreatment of alkali method using NaOH, the rate of eliminating FFA appeared more than 86% regardless of acid value. Therefore, it was considered that alkali method using NaOH was the most effective in the view of economical and productive aspects, taking it into account that the acid value of animal fat recovered from fleshing scrap generated during leather making processes was 7 to 8.

• Restorative Dentistry and Endodontics
• /
• 제17권1호
• /
• pp.95-103
• /
• 1992

The purpose of this study was to evaluate the effect of the dentin pretreatment on the marginal leakage of a glassionomer cement. 1n this study, 60 molars with sound and healthy crown portion were used. The dentin surface of these teeth were exposed and polished with 600 grit silicon carbide paper. Square - shaped cavities were prepared on the flattened dentin surfaces and these were divided into 4 groups according to the dentin pretreatment procedures. Group I : Dentin pretreatment with distilled water as a control group. Group II : Dentin pretreatment with 5% sodium hypochlorite solution. Group III : Dentin pretreatment with Ketac conditioner. Group IV : Dentin pretreatment with 40% polyacrylic acid. The degrees of dye penetration in the cavity walls were assessed using a stereoscope at ${\times}40$ magnification according to the maximum dye penetration. The results were analyzed by using Mann - Whitney U test. The results were as follows : 1. All groups showed varying depth of dye penetration. 2. Distilled water group showed the most severe marginal leakage when compared with the other groups(P<0.05). 3. 40% polyacrylic acid group showed the least amount of marginal leakage compared with the other groups (P<0.05). 4. There were significant differences between Goup I(distilled water) and Group IV (40% polyacrylic acid)(P<0.05), but there were no significant differences among Group I(distilled water), Group II(sodium hypochlorite), Group III(Ketac conditioner) (P>0.05).

• Journal of Environmental Health Sciences
• /
• 제17권2호
• /
• pp.121-126
• /
• 1991

To clarify a cause of increased serum level of acid phosphatase in CCl$_{4}$-treated rats, the acid phosphatase activity of liver was compared with that serum. Concomitantly, the serum and liver acid phosphatase activity of CCl$_{4}$-treated rats were compared with that of CCl$_{4}$-treated rats pretreated with prednisolone or actinomycin D. In CCl$_{4}$-treated rats, the activity of serum acid phosphatase was significiantly increased whereas that of liver acid phosphatase was rather slightly decreased. the pretreatment of prednisolone led to the decreased activity of serum and liver acid phosphatase in CCl$_{4}$-treated rats. But the pretreatment of actinomycin D rather increased the activity of liver and serum enzyme. In conclusion, it is likely the increased activity of serum acid phosphatase is based on the excess leaking of acid phosphatase into blood by the increased membrane permeability of both liver cell and lysosome in it.