• Journal of Pharmaceutical Investigation
• /
• v.41 no.6
• /
• pp.363-369
• /
• 2011

In this study, we demonstrated the release behavior of carvedilol with the content of polyvinylpyrrolidone K-30 (PVP K-30) and the effect of citric acid and fumaric acid as acidifiers on the release behavior of drug. In addition, it tries to inquire into the release behavior difference of the carvedilol according to the manufacturing method. The release behavior of the tablets was compared with Dilatrand$^{(R)}$ in the simulated gastric fluid (pH1.2). Differential scanning calorimeter (DSC), X-ray diffraction (XRD) and Fourier-transform infrared spectroscopy (FT-IR) were characterized for the physicochemical properties of the tablets. In case of mixing the carvedilol and PVP K-30, in case the ratio of the carvedilol and PVP K-30 was 1:5, the release behavior was the highest among. As well as the dissolution rate of tablets manufactured by lyophilization and rotary evaporator was higher than physical mixture. The dissolution rate of containing acidifiers was more improved. But, rather the excessive amount of the acidifier addition reduced the dissolution rate.

• Journal of Pharmaceutical Investigation
• /
• v.22 no.2
• /
• pp.105-113
• /
• 1992

To improve the solubility and dissolution rate of trimethoprim (TMP), which is slightly soluble drug, its inclusion complexes were prepared and studied in this experiment. Inclusion complexes of TMP with ${\beta}-cyclodextrin$ and ${\beta}-cyclodextrin$ polymer (CDPS) were prepared according to Fenyvesi method. These were compared with TMP and its physical mixture with CDPS. Water, diluted hydrochloric acid and phosphate buffer solution were used as dissolution media. And accelerated stability test was studied at $50,\;70\;and \;80^{\circ}C$. It was found that solubility and dissolution rate of inclusion complexes were increased in water. Especially, the solubility and dissolution rate of TMP was found to be markedly increased by inclusion complexation with CDPS. In stability test, ${\beta}-cyclodextrin$ inclusion complexes were more or less stable than TMP alone. This tendency was not led in CDPS. Consequently, CDPS was useful in increasing dissolution rate and stability of TMP.

• Journal of Pharmaceutical Investigation
• /
• v.30 no.2
• /
• pp.119-125
• /
• 2000

In an attempt to develop a non-aqueous liquid formulation of practically insoluble biphenyl dimethyl dicarboxylate (DDB), dissolution and permeation studies were performed. Various non-aqueous DDB solutions were formulated and filled into empty hard capsules. Dissolution rates of a new formulation were compared with those of commercially available DDB preparations using one and eight dose units. Dissolution rates after 2 hr of DDB tablets (DDB 25 mg), hard capsules (DDB 7.5 mg) and soft capsules (DDB 7.5 mg) on market and new formulation (DDB 7.5 mg) were 6.3, 15.0, 84.5 and 98.0%, respectively. Higher doses (8 units) resulted in a supersaturation within one hr of dissolution, and dissolved amounts were reduced markedly. Due to the saturation and precipitation, a directly proportional dose-dissolution relationship was not observed. The addition of copolyvidone and/or glycyrrhizic acid ammonium salt to DDB solution in polyethylene glycol 300 and 400 inhibited the formation of precipitates during dissolution and markedly enhanced the rabbit duodenal permeation of DDB. From the site-specific gastrointestinal permeation studies, it was found that permeation rates of DDB after mixing of non-aqueous DDB solutions with aqueous buffered solutions were faster in the order of $rectal\;<\;colonic\;{\risingdotseq}\;ileal\;{\risingdotseq}\;duodenal\;<\;jejunal\;<\;gastric$.

• Analytical Science and Technology
• /
• v.12 no.1
• /
• pp.53-60
• /
• 1999

Dissolution properties for the 6 inorganic pollutants (As, Cd, Cu, Pb, Zn, Cr) in soils have been studied. These 6 inorganic pollutants were spiked to 3 kinds of fresh soils which were sand, clay, and loam. The dissolution properties of the prepared samples were investigated under the various extracting conditions such as extracting time, acid concentration, particle size, etc. in order to obtain basic information about the process of extraction test and improvement of related analytical methods. As the results, dissolution properties were affected mainly by acid concentration in extracting procedure and mineral composition of soils. On the other hand, extracting time, sort of acids and particle size of soils had a little influence on the dissolution properties. Cd revealed very high dissolving efficiency and As was very low in whole extracting test.

• Textile Coloration and Finishing
• /
• v.24 no.1
• /
• pp.45-53
• /
• 2012

In order to make a supermicrofiber fabric with PET/co-PET sea-island type filament fiber, the optimum conditions of dissolution of co-PET composite filament fiber was examined. The data set was made at various organic acid concentration and steam temperature with treated time as a main variable. At the same time, the microstructure changes by organic acid treatment of sea-island type PET supermicrofibers were monitored by thermal analysis morphology, DSC thermgrams and SEM images. Weight reduction behavior of supermicrofibers by caustic treatment was investigated in a comparative method. The termination of dissolution was also confirmed using DSC thermgrams and SEM images.

• Bulletin of the Korean Chemical Society
• /
• v.33 no.8
• /
• pp.2539-2545
• /
• 2012

In the present study, we suggest a new way to reactivate performance of direct formic acid fuel cell (DFAFC) and explain its mechanism by employing electrochemical analyses like chronoamperometry (CA) and cyclic voltammogram (CV). For the evaluation of DFAFC performance, palladium (Pd) and platinum (Pt) are used as anode and cathode catalysts, respectively, and are applied to a Nafion membrane by catalyst-coated membrane spraying. After long DFAFC operation performed at 0.2 and 0.4 V and then CV test, DFAFC performance is better than its initial performance. It is attributed to dissolution of anode Pd into $Pd^{2+}$. By characterizations like TEM, Z-potential, CV and electrochemical impedance spectroscopy, it is evaluated that such dissolved $Pd^{2+}$ ions lead to (1) increase in the electrochemically active surface by reduction in Pd particle size and its improved redistribution and (2) increment in the total oxidation charge by fast reaction rate of the Pd dissolution reaction.

• Journal of Pharmaceutical Investigation
• /
• v.16 no.2
• /
• pp.55-67
• /
• 1986

Inclusion complexation of tiaprofenic acid (TPA) with cyclodextrins $({\alpha}-,\;{\beta}-,\;{\gamma}-CyDs)$ in aqueous solution and in solid phase was investigated by solubility method, measurement of partition coefficient, ultra-violet, circular dichroism, infrared spectroscopies, powder X-ray diffractometry and differential scanning calorimetry. Investigations were made to prepare inclusion complexes of TPA with ${\beta}-CyD$ in solid powdered form by coprecipitation, freeze-drying, spray-drying and co-pulverization methods. The coprecipitation, freeze-drying and spray-drying methods were successful in obtaining inclusion complexes. The results showed that the latter two methods might be originally superior to the former in obtaining powdered inclusion completes. Especially, it was shown by powder X-ray diffractometry that spray-dried ${\beta}-CyD$ alone, TPA-spray-dried ${\beta}-CyD$ physical mixture, and spray-dried $TPA-{\beta}-CyD$ complex were amorphous. The dissolution behaviours of $TPA-{\beta}-CyD$ systems prepared by above four methods were compared with those of TPA alone and $TPA-{\beta}-CyD$ physical mixture, and the rates of dissolution of TPA in pH 1.2 buffer were greatly enhanced by inclusion complexation and copulverization.

• Geomechanics and Engineering
• /
• v.34 no.5
• /
• pp.473-480
• /
• 2023

Acid rain of soils has a significant impact on mechanical properties. An X-ray diffraction test, scanning electron microscope (SEM) test, laser particle size analysis test, and triaxial unconsolidated undrained (UU) test were carried out in red clay soils with different compaction degrees under the effect of different concentrations of acid. The experiments demonstrated that: the dissolution effect of acid rain on colluvium weakened with the increase in the compacting degree under the condition of certain pH values, i.e., the damage to the structure of red clay soil was relatively light, where the number of newly increased pores in the soil decreased and the agglomeration of soil particles increased; for the same compacting degree, the structural gap decreased, and the agglomeration increased with the increase in the pH value (acidity decreases) of the acid rain; the dissolution rate of Si, Al, Fe, and other elemental minerals and cement in red clay soil was found to be higher under the effect of acid rain, in turn destroying the original structure of the soil body and producing a large number of pores. This is macroscopically expressed as the decrease of the soil cohesion and internal friction angle, thereby reducing the shear strength of the soil body.

• Journal of Pharmaceutical Investigation
• /
• v.25 no.1
• /
• pp.37-46
• /
• 1995

The experiment was designed to investigate the sustained release dosage form of silymarin (SL) from chitosan (CS) carrier. Solid dispersed system was prepared by mixing the drug with chitosan. This solid dispersed system was cross-linked by glutaraldehyde, formaldehyde, acetaldehyde and butylaldehyde, respectively. The dissolution rates of these preparations were compared with each other in vitro. The silymarin was mired with anionic alginate gel and bead was prepared by dropping this mixture to cationic chitosan solution including calcium chloride. Chitosan encapsulated alginate bead after drying in the oven was investigated for the dissolution rate. The dissolution rate of SL-CS mixture was delayed with increase in the amounts of CS and the concentration of aldehyde. The effect on the delay of dissolution rate was in the increasing order of formaldehyde, glutaraldehyde, acetaldehyde, butylaldehyde. The dissolution rate of chitosan encapsulated alginate bead was parallel with the concentration of chitosan in diluted hydrochloric acid solution and delayed with increase in the concentration of chitosan in phosphate buffer solution.

• Analytical Science and Technology
• /
• v.23 no.6
• /
• pp.511-517
• /
• 2010

Dissolution procedure of vanadium pentoxide, which is widely used as a catalyst for production of sulfuric acid or an oxide reaction of the numerous organic compounds, was investigated. Reagent of vanadium pentoxide was completely dissolved in aqua regia-$H_2O_2$-HF solution, but plate type of vanadium pentoxide sample was not clearly dissolved with mixed acids. Thus, in order to establish the dissolution procedure for plate type of vanadium pentoxide, the solubility of vanadium pentoxide was investigated through comparison of acid treatment-fusion and microwave digestion methods. The optimized acid for dissolution of vanadium compound was found to be mixing acids of aqua regia, $H_2O_2$ and HF. Acid-fusion and microwave digestion methods have a similar property in the solubility of vanadium compound, but the latter was more quick and convenient procedure. The content of vanadium pentoxide was found to be $97.9{\pm}0.9%$ using an inductively coupled plasma atomic emission spectrometer after dissolution of a sample with the microwave digestion system.