• 대한토목학회논문집
• /
• 제26권1D호
• /
• pp.133-140
• /
• 2006

본 연구에서는 효율적인 철도안전관리를 위해 철도사고유형을 재분류하고 이를 표준화하기 위해 표준화된 코드(Code)를 제시하고 있다. 우선, 기존의 국내 외 철도사고유형을 세부적으로 분석하였다. 사례연구를 바탕으로 새로운 철도사고유형은 서로 중복되지 않게 9가지로 분류되었고 40개의 서로 다른 사고형태로 세분화 되었다. 이런 모든 형태는 9개의 사고대상과 6개의 사고위치와 연관된다. 따라서 새로운 철도사고유형을 표준화 하기위해 철도사고의 종류, 철도사고 형태, 철도사고 대상, 철도사고 위치의 4자리 코드 조합을 제시하였다. 또한 현재 사용되고 있는 철도사고DB를 본 연구에서 제안하고 있는 표준코드로 전환하여 사용할 수 있는 방안을 제시하였다. 이러한 코드(Code)는 철도사고 예방, 대비, 대응, 복구로 이루어진 철도안전관리체계구축에서 중요한 역할을 담당할 것이다.

• 자동차안전학회지
• /
• 제13권4호
• /
• pp.53-59
• /
• 2021

According to the Korean Traffic Accident Analysis System (TAAS), more than 200,000 traffic accidents occur every year. Also, the statistics including auto insurance companies data show 1.3 million traffic accidents. In the case of TAAS, the types of traffic accidents are simply divided into four; frontal collision, side collision, rear collision, and rollover. However, more detailed information is needed to assess for advanced driver assist systems at intersections. For example, directional information is needed, such as whether the vehicle in the car accident way in a straight or a left turn, etc. This study intends to redefine the type of accident with the more clear driving direction and path by referring to the Negligence standards used in automobile insurance accidents. The standards largely divide five categories of car-to-car/motorcycle /pedestrian/cyclist, and highway, and the each category is classified into dozens of types by status of the traffic signal, conflict situations. In order to present more various accident types for auto insurance accidents, the standards are reclassified driving direction and path of vehicles from crash situations. In results, the car-to-car accidents are classified into 33 accident types, car-to-pedestrian accidents have 19 accident types, car-to-motorcycle accidents have 38 accident types, and car-to-cyclist accidents are derived into 26 types.

• 한국응급구조학회지
• /
• 제8권1호
• /
• pp.179-187
• /
• 2004

The purpose of the study was to injury types in Daegu subway fire accident, Sampung department store collapse, Mokpo airport civil aircraft accident, and Buan sunken ship disaster. The conclusion obtained from these analyses are as following. 1. The total of victims were Sampung department store collapse(l440 people). Buan sunken ship disaster(355 people), Daegu subway fire accident(340 people), and Mokpo airport civil aircraft accident(110 people). 2. The total of dead people were Sampung department store collapse(502 people), Buan sunken ship disaster(287 people), Daegu subway fire accident(192 people), and Mokpa airport civil aircraft accident(66 people). 3. The total of injured people were Sampung department store collapse(938 people), Daegu subway fire accident(148 people), Mokpo airport civil aircraft accident(84 people), and Buan sunken ship disaster(67 people). 4. The major types of victims presented smoke inhalation such as coughing, dyspnea, and sore throat in Daegu subway fire accident. 5. The major types of victims presented crushing(multiple fractures), vertebral, and soft tissues injuries in Sampung department store collapse. 6. The major types of victims presented multiple fractures. In addition to, a lot of people showed vertebral injuries and shock symptoms in Mokpo airport civil aircraft accident. 7. The major types of victims presented drowning as well lots of hypothermia patients in Buan sunken ship disaster. There were a wide variety of types in human disaster. Therefore, the most important disaster training program need to each disaster aspect in the local emergency medical services system. Moreover, the emergency medical services personnel should be understand and training for injury types of each human disaster.

• 농업과학연구
• /
• 제45권4호
• /
• pp.889-903
• /
• 2018

The purposes of this study were to classify consumer types and to analyze purchase behavior depending on food safety attitudes related to the Fukushima nuclear accident. Based on the consumer survey data, factor analysis and cluster analysis were done to classify consumer types. Applying factor analysis, six factors with a total variance of 73.4% were extracted from 22 basic variables. The 6 factors were termed 'anxiety from ingesting agricultural and fishery products after the nuclear accident', 'importance of food safety when purchasing food', 'reduced rate of purchases of agricultural and fishery products after the accident', 'importance of food prices', 'socio-demographic characteristics' and 'family composition'. Using cluster analysis, consumers were classified into 5 types using the factor scores of 6 factors. The main results are as follows. For every consumer type, the anxiety about imported agricultural and fishery products was higher than that for domestic products after the nuclear accident. The food safety attitudes of consumers were mainly formed by the socio-demographic characteristics. Consumer types with high-education and high-income responded flexibly to the food safety concerning the accident; especially, the consumer type with a high-income and kids under 19 responded very reasonably to the accident. However, consumer types with a low-income and aged over 50 or less than 30 years were the least responsive to the accident, mainly due to financial restrictions. Thus, we suggest some food safety strategies and policy implications based on consumer type for food safety after the accident.

• 한국건축시공학회:학술대회논문집
• /
• 한국건축시공학회 2007년도 춘계학술논문 발표대회
• /
• pp.109-112
• /
• 2007

As buildings become higher, larger, and more complex, safety issues for construction workers working at such environments become more important. We analyzed 140 critical accident cases reported to the KOSHA(Korea Occupational Safety & Health Agency) for construction cranes and lifts by types of cranes and by patterns of accidents and causes. By finding out the accident's types and causes, we expect to develop an efficient measure for preventing similar accidents in the near future. The cases will be studied further and reexamined using the FMEA(Failure Mode and Effect Analysis) as a quantitative analysis method.

• 한국항만학회지
• /
• 제13권1호
• /
• pp.101-112
• /
• 1999

Traffic accidents increase with the increase of the vehicles in operation on the street. Especially big traffic accidents composed of over 3 killed or 20 injured accidents with the property damage become one of the serious problems to be solved in most of the cities. The purpose of this study is to build the discrimination model on big traffic accidents using the Quantification II theory for establishing the countermeasures to reduce the big traffic accidents. The results are summarized as follows. 1)The existing traffic accident related model could not explain the phenomena of the current traffic accident appropriately. 2) Based on the big traffic accident types vehicle-vehicle, vehicle-alone, vehicle-pedestrian and vehicle-train accident rates 73%, 20.5% 5.6% and two cases respectively. Based on the law violation types safety driving non-fulfillment center line invasion excess speed and signal disobedience were 48.8%, 38.1% 2.8% and 2.8% respectively. 3) Based on the law violation types major factors in big traffic accidents were road and environment, human, and vehicle in order. Those factors were vehicle, road and environment, and human in order based on types of injured driver’s death. 4) Based on the law violation types total hitting and correlation rates of the model were 53.57% and 0.97853. Based on the types of injured driver’s death total hitting and correlation rates of the model were also 71.4% and 0.59583.

• 한국철도학회:학술대회논문집
• /
• 한국철도학회 2008년도 춘계학술대회 논문집
• /
• pp.1340-1349
• /
• 2008

This paper suggests to standardize railway accident restoration types as the standardized code and to develop standard operation procedures(SOP) for the efficient railway accident management and recovery system. First of all, occurred damage types as the existing railway accident types in both domestic and foreign cases have been carefully analyzed and then reclassified. Therefore, this study suggested the combination of 3 distinct code factors: restoration class, restoration object, and restoration location to standardize them. In addition, temporary restoration SOP will play a major role in the railway accident batabase management system and SOP for the damage limitation and the prevention of accident spread.

• 대한안전경영과학회지
• /
• 제15권1호
• /
• pp.87-100
• /
• 2013

The purpose of this study is to analyze the employer's perception and corresponding types of the Industrial Accident Compensation Insurance System. To analyze the employer's perception and corresponding types of the Industrial Accident Compensation Insurance System, interviews and surveys were conducted. Based on the analysis of interview and survey results, we proposed policy alternatives to raise awareness of the Industrial Accident Compensation Insurance System and increase the utilization of the Industrial Accident Compensation Insurance System.

• 한국철도학회:학술대회논문집
• /
• 한국철도학회 2009년도 춘계학술대회 논문집
• /
• pp.1412-1425
• /
• 2009

This paper suggests to standardize railway accident restoration types as the standardized code and to develop standard operation procedures(SOP) for the efficient railway accident management and recovery system. First of all, occurred damage types as the existing railway accident types in both domestic and foreign cases have been carefully analyzed and then reclassified. Therefore, this study suggested the combination of 3 distinct code factors: restoration class, restoration object, and restoration location to standardize them. In addition, temporary restoration SOP will play a major role in the railway accident database management system and SOP for the damage limitation and the prevention of accident spread.

• 한국건축시공학회:학술대회논문집
• /
• 한국건축시공학회 2022년도 봄 학술논문 발표대회
• /
• pp.127-128
• /
• 2022

The construction industry has a higher disaster rate than other industries, so safety education and management are highly important. In order to reduce the construction accident rate, it is necessary to study the key safety management factors reflecting the characteristics of the construction industry, where there are differences in processes and manpower input for each process, and a small number of managers. Therefore, in this study, key safety management factors for each Process of construction were derived through cross-analysis between safety accident types and accident occurrence objects through disaster case data. The extracted key safety management factors are expected to provide useful information for safety education and supervision of construction sites.