• Economic and Environmental Geology
• /
• v.51 no.6
• /
• pp.543-551
• /
• 2018

The uranium concentrations were determined in groundwater collected from 3,820 community groundwater system (CGS) located in remote rural areas where access to the nationwide water work is not easy. The frequency distribution of uranium concentrations shows a lognormal distribution which is common in most radionuclide surveys. The measured maximum uranium concentration was $1,757.0{\mu}g/L$ with an average of $6.46{\mu}g/L$ and a median of $0.76{\mu}g/L$. When grouping the uranium concentration results of CGS into 10 geological units, the median uranium concentration was high ($0.99-2.05{\mu}g/L$) in three granite areas, and low in sedimentary rocks areas and porous volcanic rocks areas ($0.04-0.50{\mu}g/L$). Of the 3,820 samples, 3.8% are above the guideline value of $30{\mu}g/L$ (WHO, 2011). On the other hand, the exceeding rates of JGRA and PGRA CGS are 8.5% and 7.5%, respectively. Therefore, attention should be paid for the development of new CGS along with the management of the existing CGS in JGRA and PGRA areas.

• World Technopolis Review
• /
• v.8 no.1
• /
• pp.59-70
• /
• 2019

Where is a better place to live? In the coming era, this should be more than simply a livable place. It should be an adaptable place that has a flexible system adaptable to any new situation in terms of diversity. Customization and real-time operation are needed in order to realize this technologically. We expect a smart city to have a flexible system that applies technologies of self-monitoring and self-response, thereby being a promising city model towards being a better place to live. Energy demand and supply is a crucial issue concerning our expectations for the flexible system of a smart city because it is indispensable to comfortable living, especially city living. Although it may seem that energy diversification, such as the energy mix of a country, is a matter of overriding concern, the central point is the scale of place to build grids for realizing sustainable urban energy systems. A traditional hard energy path supported by huge centralized energy systems based on fossil and nuclear fuels on a national scale has already faced difficult problems, particularly in terms of energy flexibility/resilience. On the other hand, an alternative soft energy path consisting of small diversified energy systems based on renewable energy sources on a local scale has limitations regarding stability, variability, and supply potential despite the relatively light economic/technological burden that must be assumed to realize it. As another alternative, we can adopt a holonic path incorporating an alternative soft energy path with a traditional hard energy path complimentarily based on load management. This has a high affinity with the flexible system of a smart city. At a system level, the purpose of all of the paths mentioned above is not energy itself but the service it provides. If the expected energy service is fixed, the conclusive factor in choosing a more appropriate system is accessibility to the energy service. Accessibility refers to reliability and affordability; the former encompasses the level of energy self-sufficiency, and the latter encompasses the extent of energy saving. From this point of view, it seems that the small diversified energy systems of a soft energy path have a clear advantage over the huge centralized energy systems of a hard energy path. However, some insuperable limitations still remain, so it is reasonable to consider both energy systems continuing to coexist in a multiplexing energy system employing a holonic path to create and maintain reliable and affordable access to energy services that cover households'/enterprises' basic energy needs. If this is embodied in a smart city concept, this is nothing else but smart energy inclusion. In Japan, following the Fukushima nuclear accident in 2011, a trend towards small diversified energy systems of a soft energy path intensified in order to realize a nuclear-free society. As a result, the Government of Japan proclaimed in its Fifth Strategic Energy Plan that renewable energy must be the main source of power in Japan by 2050. Accordingly, Sony vowed that all the energy it uses would come from renewable sources by 2040. In this situation, it is expected that smart energy inclusion will be achieved by the Japanese version of a smart grid based on the concept of a minimum cost scheme and demand response.

• Journal of the Korean Society of Surveying, Geodesy, Photogrammetry and Cartography
• /
• v.37 no.4
• /
• pp.253-265
• /
• 2019

In this study were analyzed the errors on the registration of details information, location of E-GEN (Emergency medical-GEN) AED (Automated External Defibrillator) installation site and the adequacy of spatial arrangement, which suggests an improvement methods of constructing an app or web based on time and space data for efficient operation of considering accessibility and usability. As a result of this study, first, it was not equal to each other for locations of each installation point of AED, that confirmed some area were dense or requiring additional installation. Second, it confirmed the inaccuracies in inputting and registering information about the installed location, such as the actual installation location information and the attribute information of the AED. Third, the main access node and the main address node were connected to a straight line that was found not be connected to the back door, the straight line, the stairs. Also, the opening times of AED installation sites varied according to the week and the season, the entrance was managed by the apartment management office in a separate place, it needs to be established on this information. In conclusion, it proposed a method to improve spatial equity and accessibility, a method to provide accurate distance and time according to actual movement routes in case of emergency, and a possibility of using each facility considering day and time.

• Journal of IKEEE
• /
• v.23 no.3
• /
• pp.1096-1099
• /
• 2019

In this paper, we propose the protocol for construction of smart factory. The proposed protocol for construction of smart factory consists of an OPC UA Server/Client, a technology of TSN realtime communication, a NTP & PTP time synchronization protocol, a FieldBus protocol and conversion module, a technology of saving data for data transmit latency and synchronization protocol. OPC UA server/client is a system integration protocol which makes interface industrial hardware device and supports standardization which allows in all around area and also in not independent from any platform. A technology of TSN realtime communication provides an high sensitive time management and control technology in a way of sharing specific time between devices in the field of high speed network. NTP & PTP time synchronization protocol supports IEEE1588 standardization. A fieldbus protocol and conversion module provide an extendable connectivity by converting industrial protocol to OPC. A technology of saving data for data transmit latency and synchronization protocol provide a resolution function for a loss and latency of data. Results from testing agencies to assess the performance of proposed protocol for construction of smart factory, response time was 0.1367ms, synchronization time was 0.404ms, quantity of concurrent access was 100ea, quantity of interacting protocol was 5ea, data saving and synchronization was 1,000 nodes. It produced the same result as the world's highest level.

• Korean Journal of Heritage: History & Science
• /
• v.52 no.1
• /
• pp.242-257
• /
• 2019

The Demilitarized Zone (DMZ) stretches two kilometers north and south from the Military Demarcation Line (MDL) of South and North Korea. This area was established as a weapons-free buffer zone when an armistice agreement was signed in 1953. However, there have been several very high-tension military standoffss over the past 65 years. On the South Korean side, civilian access to the Civilian Control Line (CCL) and beyond to the north has been restricted, and natural heritage has been well maintained. Natural heritage is defined as living things, their habitat and non-living things of the ecosystem which deserve to be protected. Research shows that a variety of flora and fauna, their habitat, marshes and geographical structures are found across the DMZ region. Although the DMZ region has not been such a good place for habitat conservation, we can say that this area may be the best location for restoration in terms of its variety of ecosystems and considerable land size. Restoration of course depends on future plans and management policies. This area, including the DMZ and the well-protected north of the CCL, will be the best habitat for endangered species of wild fauna and flora if we classify the various habitat types and create a habitat map. In doing this project, we need to include the estuary of the Han River and the lagoon (brackish water lake) of the East Sea coast. In addition, we must establish long-term plans for conservation and sustainable use and do international scientific research across the DMZ region in collaboration with scientists of South and North Korea and international experts. Mutual cooperation between the two Koreas for investigation and conservation efforts is paramount.

• Journal of Convergence for Information Technology
• /
• v.9 no.4
• /
• pp.152-159
• /
• 2019

The purpose of this study is to investigate the effect of transaction characteristics on transaction cost and choice intention by applying transaction cost theory to experiential product. Experience-specificity, transaction uncertainty, and personal uncertainty are proposed to reflect the characteristics of experiential products, and the effects of these variables on transaction costs and transaction costs are assumed to have an influence on the choice intention. The results of this study are summarized as follows. First, experience-specificity(site, physical equipment, knowledge skill, temporal), transactional uncertainty(product-, process-), personal uncertainty (preference-, and situation-) have a significant positive effect on transaction cost. Second, transaction costs (search, comparison, examination, negotiation, payment, delivery) have a significant negative effect on the choice intention of the experiential product. The results of this study show that the increase of transaction costs can reduce the choice of experiential products and the strategic consideration of experience specificity, transaction uncertainty and individual uncertainty are required to reduce transaction costs. In addition, experiential products lacked access from a transactional and cost-based point of view, and this study contributes theoretically by compensating for the lack.

• Korean Journal of Environment and Ecology
• /
• v.35 no.2
• /
• pp.98-105
• /
• 2021

Understanding the migration patterns and habitats of juvenile birds during the post-fledging stage is very important for conservation and management of individuals. The Chinese Egret is an internationally protected species. During the wintering season, they inhabit South-East Asia, such as the Philippines, Malaysia, and Taiwan, and breed in China, Russia, and uninhabited islands on the west coast of Korea. IIn this study, we attached a GPS telemetry tracking device to six juvenile Chinese Egrets breeding on Chilsan Archipelago in 2018 and 2019 to identify habitats by analyzing the home range during the post-fledging stage in the summer season. The individual CE1801 moved north and then returned to the Yeonggwang Baeksu tidal flat area, and CE1802 and CE1803 migrated north and inhabited Taean-gun. In 2019, CE1901 showed a similar pattern to CE1801, and CE1902 migrated southward to the Wando-gun area, while CE1903 moved south to the Sinan-gun area then returned to the Yeonggwang Baeksu tidal flat area, showing KDE 50%. The study results confirmed that the Chinese Egret moved broadly around the flat tidal area on the west coast to find a stable habitat during the post-fledging stage. Efforts to protect the habitat, such as limiting the development of this area and restricting human access, are necessary.

• Journal of Digital Convergence
• /
• v.19 no.4
• /
• pp.151-157
• /
• 2021

Recently, IoT technology has been applied to various cloud environments, requiring accurate verification of various information generated by IoT devices. However, due to the convergence of IoT technologies and 5G technologies, accurate analysis is required as IoT information processing is rapidly processed. This paper proposes a blockchain-based multi-IoT verification model for overlay cloud environments. The proposed model multi-processes IoT information by further classifying IoT information two layers (layer and layer) into bits' blockchain to minimize the bottleneck of overlay networks while ensuring the integrity of information sent and received from embedded IoT devices within local IoT groups. Furthermore, the proposed model allows the layer to contain the weight information, allowing IoT information to be easily processed by the server. In particular, transmission and reception information between IoT devices facilitates server access by distributing IoT information from bits into blockchain to minimize bottlenecks in overlay networks and then weighting IoT information.

• Journal of Digital Convergence
• /
• v.19 no.1
• /
• pp.77-88
• /
• 2021

Cloud computing is getting a lot of attention by many people and businesses due to IT environmental changes such as the proliferation of smart devices, the increase of digital data, and the cost of IT resources. More individuals use personal cloud computing services for storing and managing information and data. Therefore, this study proposed determinants that are expected to have an influence on evaluating the value of cloud computing based on the value-based adoption model, examining the relationship between the continuous use intention of cloud computing. Results of the study show that usefulness, convenience of information access, extensibility had a positive impact on perceived value while privacy concerns and costs had a negative impact on perceived value. In addition, perceived value was found to have a significant effect on the intention to continue use of cloud computing. Finally, trust was found to have a significant effect on the perceived value and the intention to continue use of cloud computing. The findings are expected to provide useful information for understanding the factors that individual users consider important in the steadily growing cloud computing market.

• The Journal of the Institute of Internet, Broadcasting and Communication
• /
• v.20 no.6
• /
• pp.77-83
• /
• 2020

The heat treatment facility is in a situation where the scope of application of the remote IOT system is expanding due to the harsh environment caused by high heat and long working hours among the root industries. In this heat treatment process environment, the IOT middleware is required to play a pivotal role in interpreting, managing and controlling data information of IoT devices (sensors, etc.). Until now, the system controlled by the heat treatment remotely was operated with the command of the operator's batch system without overall monitoring of the site situation. However, for the safety and precise control of the heat treatment facility, it is necessary to control various sensors and recognize the surrounding work environment. As a solution to this, the heat treatment safety support system presented in this paper proposes a support system that can detect the access of the work manpower to the heat treatment furnace through thermal image detection and operate safely when ordering work from a remote location. In addition, an OPEN CV-based deterioration analysis system using DNN deep learning network was constructed for faster and more accurate recognition than general fixed hot spot monitoring-based thermal image analysis. Through this, we would like to propose a system that can be used universally in the heat treatment environment and support the safety management specialized in the heat treatment industry.